DALS Lighting 6000-JB Junction Box Instruction Manual

1. හැඳින්වීම

The DALS Lighting 6000-JB Junction Box is designed to facilitate the power connection for 120-Volt LED puck light systems. This aluminum construction junction box provides a direct-wire solution, enabling the linking of multiple LED fixtures on a single circuit. It is intended for indoor use only and offers a reliable power distribution point for your lighting setup.

2 ආරක්ෂිත තොරතුරු

• බලය විසන්ධි කරන්න: Always ensure the main power supply is turned off at the circuit breaker before beginning any installation, maintenance, or troubleshooting.
• සුදුසුකම් ලත් විදුලි කාර්මිකයා: Installation should be performed by a qualified electrician or a knowledgeable individual familiar with electrical wiring and building codes.
• වෙළුමtage: This product operates on 120 Volts. Incorrect wiring can lead to electrical shock or fire.
• ගෘහස්ථ භාවිතය පමණි: The 6000-JB Junction Box is rated for indoor use in dry locations only. Do not expose to moisture or outdoor elements.
• භූගත කිරීම: දේශීය විදුලි කේතවලට අනුව නිසි බිම් සැකසීම සහතික කරන්න.

3. පැකේජ අන්තර්ගතය

• 1 x DALS Lighting 6000-JB Junction Box for Power LED Puck Light

4. පිහිටුවීම සහ ස්ථාපනය

The DALS Lighting 6000-JB Junction Box is designed for hardwired, direct-wire installation. Follow these general steps for proper setup:

1. සැලසුම් ස්ථානගත කිරීම: Determine the optimal wall-mount location for the junction box, ensuring it is accessible and within reach of the power source and the LED puck lights it will power.
2. රැහැන් ඇදීම සූදානම් කරන්න: Ensure all wiring from the main power supply and to the LED puck lights is properly stripped and ready for connection.
3. පෙට්ටිය සවි කරන්න: Securely mount the junction box to a stable surface using appropriate fasteners (not included). The box is designed for wall mounting.
4. විදුලි සම්බන්ධතා ඇති කරන්න: Connect the 120V input power wires to the designated terminals inside the junction box. Connect the output wires leading to your LED puck lights to the appropriate output terminals. Ensure all connections are secure and comply with local electrical codes.
5. Close the Box: Once all connections are made and verified, securely close the junction box cover.
6. බලය ප්‍රතිස්ථාපනය කරන්න: පරිපථ කඩනයේදී ප්‍රධාන බල සැපයුම නැවත ක්‍රියාත්මක කරන්න.

This image displays the DALS Lighting 6000-JB Junction Box, a white rectangular unit. It features a rocker switch on one side for power control and a circular output port labeled 'OUT' on another side, secured by four screws. The box is designed for direct-wire connections to power LED puck lights.

5. මෙහෙයුම් උපදෙස්

The DALS Lighting 6000-JB Junction Box serves as a central power distribution point for your 120V LED puck lights. Its operation is straightforward:

• බල පාලනය: The integrated rocker switch on the side of the junction box controls the power supply to the connected LED puck lights.
• සක්රිය කිරීම: Flip the rocker switch to the 'I' (ON) position to supply power to the connected LED puck lights.
• අක්රිය කිරීම: Flip the rocker switch to the 'O' (OFF) position to cut power to the connected LED puck lights.

Ensure that all connected LED puck lights are compatible with a 120V power supply and are properly installed according to their respective instructions.

6. නඩත්තු කිරීම

The DALS Lighting 6000-JB Junction Box requires minimal maintenance.

• පිරිසිදු කිරීම: To clean the exterior of the junction box, ensure power is disconnected. Use a soft, dry, or slightly damp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන්, ද්‍රාවක හෝ රළු රසායනික ද්‍රව්‍ය භාවිතා කිරීමෙන් වළකින්න, මන්ද මේවා නිමාවට හානි කළ හැකිය.
• පරිශීලක-සේවා කළ හැකි කොටස් නොමැත: The junction box contains no user-serviceable parts. Do not attempt to open or repair the unit beyond making external electrical connections.
• වරින් වර පරීක්ෂා කිරීම: Periodically inspect the junction box and its connections for any signs of damage, loose wiring, or overheating. If any issues are observed, disconnect power immediately and consult a qualified electrician.

7. දෝශ නිරාකරණය

If your LED puck lights are not functioning as expected, consider the following troubleshooting steps:

• No Power to Lights:
  • Check if the rocker switch on the junction box is in the 'I' (ON) position.
  • Verify that the circuit breaker supplying power to the junction box is not tripped.
  • Ensure all electrical connections within the junction box and to the LED puck lights are secure.
• අතරමැදි මෙහෙයුම:
  • Inspect for any loose wiring connections.
  • Ensure the junction box is not exposed to excessive vibration or physical stress.
• Still Experiencing Issues: If troubleshooting steps do not resolve the problem, disconnect power and consult a qualified electrician or contact DALS Lighting customer support for assistance. Do not attempt to repair the unit yourself.

8. පිරිවිතර

9. වගකීම් තොරතුරු

The DALS Lighting 6000-JB Junction Box is covered by a වසර 5ක සීමිත වගකීමක්. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your purchase or contact DALS Lighting customer support.

10. සහාය

For technical assistance, warranty claims, or any questions regarding the DALS Lighting 6000-JB Junction Box, please contact DALS Lighting customer support. Refer to the contact information provided on the product packaging or the official DALS Lighting webඅඩවිය.