Nitrous Outlet 00-61002

Nitrous Outlet ProMax Dual Channel Progressive Controller Instruction Manual

ආකෘතිය: 00-61002

හැඳින්වීම

The Nitrous Outlet ProMax Progressive Controller is an advanced system designed to optimize nitrous delivery for performance applications. It integrates system activation and safety functions with extensive tuning and traction aids. This manual provides essential information for the proper installation, operation, and maintenance of your ProMax controller.

පැකේජයේ අන්තර්ගතය

ස්ථාපනය ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න:

Nitrous Outlet ProMax Controller and included accessories

රූපය 1: ProMax Progressive Controller, 20-pin connector, USB flash drive, and USB cable.

සැකසුම සහ ස්ථාපනය

Proper installation is crucial for the safe and effective operation of the ProMax controller. It is recommended that installation be performed by a qualified technician.

  1. පාලකය සවි කිරීම: Select a secure, dry location away from excessive heat and vibration. Ensure adequate space for wiring connections. The controller can be mounted using the integrated mounting tabs.
  2. Nitrous Outlet ProMax Controller installed in a vehicle's glove compartment

    රූපය 2: Example installation of the ProMax controller in a vehicle's glove compartment.

  3. රැහැන් සම්බන්ධතා: Connect the 20-pin wiring harness to the controller. Carefully follow the wiring diagram provided in the separate wiring guide (not included in this manual) for connecting to vehicle power, ground, sensors (Vehicle Speed, Trans Brake, MAP Sensor, Wide Band O2, Nitrous Pressure, Fuel Pressure), and solenoid drivers.
  4. පරිගණක සම්බන්ධතාවය: Connect the controller to a PC/laptop using the provided USB cable for initial setup and programming.
  5. මෘදුකාංග ස්ථාපනය: Install the ProMax tuning software from the provided USB flash drive onto your PC.
  6. Nitrous Outlet ProMax Controller with wiring harness and USB cable

    රූපය 3: The ProMax controller with its wiring harness and USB cable for connection.

  7. ස්ථිරාංග යාවත්කාලීන කිරීම: Ensure the controller has the latest firmware. Firmware updates can be performed via the PC software.

මෙහෙයුම් උපදෙස්

The ProMax controller offers extensive tuning capabilities. Refer to the software manual for detailed instructions on each function.

නඩත්තු කිරීම

The Nitrous Outlet ProMax controller is designed for reliability with minimal maintenance. Adhere to the following guidelines:

දෝෂගවේෂණය

This section provides general troubleshooting steps. For specific issues, consult the detailed software manual or contact technical support.

ගැටලුවවිය හැකි හේතුවවිසඳුම
පාලකය ක්‍රියාත්මක නොවේIncorrect wiring, blown fuse, loose connectionVerify power and ground connections. Check vehicle fuses. Ensure harness is securely connected.
Nitrous system not activatingIncorrect activation settings, solenoid driver issue, sensor malfunctionCheck activation parameters in software (TPS, WOT, RPM). Test solenoid drivers. Verify sensor inputs.
PC software not connecting to controllerUSB cable issue, driver not installed, controller not poweredEnsure controller is powered. Try a different USB port/cable. Reinstall USB drivers.
Inconsistent nitrous deliveryIncorrect progressive ramp settings, pressure fluctuations, solenoid issuesReview progressive ramp settings. Check nitrous bottle pressure. Inspect solenoids for proper function.

පිරිවිතර

විශේෂාංගයවිස්තර
ආදර්ශ අංකය00-61002
නිෂ්පාදකයාNitrous Outlet
නිෂ්පාදන මානයන්අඟල් 6 x 7 x 12
අයිතමයේ බරරාත්තල් 3 කි
Solenoid Drivers2 independent, 70 Amp
Progressive Frequency10-30 Hz (adjustable by 1 Hz)
Tune StorageUp to 5 internal tune-ups
Ignition Retard Outputs2
යෙදවුම්Vehicle Speed, Trans Brake, MAP Sensor, Two Wide Band O2 sensors, Two Nitrous Pressure Sensors, Fuel Pressure Sensor
සම්බන්ධතාවයUSB, CAN Bus Output
විශේෂ ලක්ෂණUpdateable Firmware, Datalogging Capable, Multi-gear lockout, Resume and restart feature

වගකීම් තොරතුරු

Nitrous Outlet products are manufactured to high standards. For specific warranty terms and conditions, please refer to the official warranty statement included with your product or visit the Nitrous Outlet official webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

නෛතික වියාචනය: Nitrous Outlet is not responsible for parts not being smog-legal in your area. Many parts are not legal for sale or use in California, or on any pollution controlled vehicle. It is your responsibility to be aware of your local emissions laws and checking for legality of any parts purchased.

සහාය

For technical assistance, questions regarding installation, operation, or troubleshooting, please contact Nitrous Outlet customer support:

අදාළ ලියකියවිලි - 00-61002

පෙරview Nitrous Outlet Purge Kit Installation Guide and Wiring
Detailed installation instructions and wiring diagram for the Nitrous Outlet Purge Kit (Part #'s 00-62000, 00-62001, 00-62008). Learn how to improve nitrous system performance with this in-line purge system.
පෙරview Nitrous Outlet 4500 Flange Carburetor WOT Switch and Bracket Installation Guide
Detailed installation instructions and system wiring diagram for the Nitrous Outlet 4500 Flange Carburetor WOT Switch and Bracket (Part Number: 00-51045). Learn how to properly mount and wire this component for your vehicle's nitrous oxide system.
පෙරview නයිට්‍රස් අවුට්ලට් 2010-2015 කැමරෝ පසුපස හැච් නයිට්‍රස් බෝතල් වරහන් ස්ථාපන මාර්ගෝපදේශය
නයිට්‍රස් අවුට්ලට් 2010-2015 කැමරෝ පසුපස හැච් 10lb සහ 15lb නයිට්‍රස් බෝතල් වරහන සඳහා සවිස්තරාත්මක ස්ථාපන උපදෙස් (කොටස් අංකය: 00-33002). ඔබේ Chevrolet Camaro සඳහා ඔබේ නයිට්‍රස් බෝතලය නිසි ලෙස සවි කරන්නේ කෙසේදැයි ඉගෙන ගන්න.
පෙරview 2015-2020 Ford Mustang EcoBoost නයිට්‍රස් තහඩු පද්ධති ස්ථාපන උපදෙස්
2015-2020 Ford Mustang EcoBoost සඳහා නිර්මාණය කර ඇති Nitrous Outlet 00-10192-XX තහඩු පද්ධතිය සඳහා සවිස්තරාත්මක ස්ථාපන මාර්ගෝපදේශය. මෙවලම්, ද්‍රව්‍ය, පියවරෙන් පියවර ක්‍රියා පටිපාටි සහ ආරක්ෂක අනතුරු ඇඟවීම් ඇතුළත් වේ.
පෙරview 2015-2023 Dodge Hellcat 6.2L Hemi Blower Spacer Plate පරිවර්තන ස්ථාපන මාර්ගෝපදේශය
නයිට්‍රස් අවුට්ලට් 2015-2023 6.2L Hemi Hellcat Challenger/Charger/Red Eye/Demon සහ 2018-2019 Trackhawk Blower Spacer Plate පරිවර්තනය සඳහා පියවරෙන් පියවර ස්ථාපන උපදෙස්. අවශ්‍ය මෙවලම්, විසුරුවා හැරීම, තහඩු ස්ථාපනය, ජෙට් ස්ථාපනය, රේඛා ස්ථාපනය සහ අවසාන එකලස් කිරීම ඇතුළත් වේ.
පෙරview 2007-14 සිල්වරාඩෝ/සියෙරා ස්විච් පැනල් ස්ථාපන උපදෙස්
Chevrolet සහ GMC සම්පූර්ණ ප්‍රමාණයේ පිකප් සඳහා නිර්මාණය කර ඇති Nitrous Outlet 2007-14 Silverado/Sierra Switch Panel (කොටස් අංකය 00-11047) සඳහා සවිස්තරාත්මක ස්ථාපන මාර්ගෝපදේශය. අවශ්‍ය මෙවලම්, පියවරෙන් පියවර උපදෙස් සහ රැහැන් රූප සටහන් ඇතුළත් වේ.