1. හැඳින්වීම සහ නිෂ්පාදනය අවසන්view
This manual provides essential information for the safe assembly, operation, and maintenance of your Yaheetech Horizontal Barbell Bumper Plate Rack Holder. This rack is designed to organize and store Olympic-sized barbell bumper plates and Olympic bars, featuring a mobile design with wheels and a handle for convenient relocation.
රූපය 1: සමස්තය view of the Yaheetech Horizontal Barbell Bumper Plate Rack Holder.
ප්රධාන ලක්ෂණ:
- මානය: 37 x 13 x 11 අඟල් (LxWxH).
- උපරිම. ධාරිතාව: 300 Lb (136 kg).
- ද්රව්ය: Powder-coated steel frame for resistance to sweat, moisture, and rust.
- Plate Slots: Includes 4 slots, each approximately 5.5 inches wide, to accommodate various bumper plate sizes.
- සංචලතාව: Equipped with two 2.6-inch diameter rolling wheels and a sweat-resistant handle for easy movement.
- Bar Holders: Two vertical holders for Olympic bars.
2 ආරක්ෂිත තොරතුරු
නිෂ්පාදනය එකලස් කිරීමට හෝ භාවිතා කිරීමට පෙර කරුණාකර සියලු ආරක්ෂක උපදෙස් කියවා තේරුම් ගන්න. මෙම උපදෙස් අනුගමනය කිරීමට අපොහොසත් වීමෙන් නිෂ්පාදනයට තුවාල හෝ හානි සිදුවිය හැකිය.
- බර සීමාව: Do not exceed the maximum weight capacity of 300 Lb (136 kg). Overloading can cause structural failure and injury.
- එකලස් කිරීම: Ensure all bolts, nuts, and components are securely tightened before use. Periodically check for tightness.
- ස්ථාවර මතුපිට: Always place the rack on a flat, stable, and level surface to prevent tipping.
- ළමුන් සහ සුරතල් සතුන්: Keep children and pets away from the rack during assembly and use.
- Moving the Rack: When moving the rack, ensure plates and bars are securely seated. Use the handle and wheels for controlled movement. Avoid sudden stops or turns when heavily loaded.
- පරීක්ෂාව: Before each use, inspect the rack for any signs of damage, loose parts, or wear. Do not use if damaged.
- නිසි පැටවීම: Distribute weight evenly across the plate slots to maintain balance and stability.
3. පැකේජ අන්තර්ගතය
එකලස් කිරීම ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න. කිසියම් කොටසක් අස්ථානගත වී හෝ හානි වී ඇත්නම්, පාරිභෝගික සහාය අමතන්න.
- ප්රධාන රාමුව (1)
- Plate Dividers (4)
- Vertical Bar Holders (2)
- හැසිරවීම එකලස් කිරීම (1)
- රෝද (2)
- Hardware Pack (Bolts, Washers, Nuts, Wrenches)
4. එකලස් කිරීමේ උපදෙස්
Follow these steps carefully to assemble your barbell bumper plate rack.
- සංරචක ඉවත් කරන්න: ඇසුරුම්කරණයෙන් සියලුම කොටස් ප්රවේශමෙන් ඉවත් කර පිරිසිදු, පැතලි මතුපිටක් මත තබන්න. පැකේජ අන්තර්ගත ලැයිස්තුවට අනුව පරීක්ෂා කරන්න.
- රෝද අමුණන්න: Secure the two wheels to the designated points on one end of the main frame using the provided bolts and wrenches. Ensure they are firmly attached and can rotate freely.
- හසුරුව ස්ථාපනය කරන්න: Attach the handle assembly to the opposite end of the main frame. Align the holes and secure with the appropriate bolts, washers, and nuts. Tighten securely.
- Insert Plate Dividers: Slide the four plate dividers into their respective slots on the main frame. These should fit snugly to create the plate storage sections.
- Mount Bar Holders: Attach the two vertical bar holders to the main frame, typically near the wheeled end. Secure them with the provided hardware.
- අවසාන පරීක්ෂාව: Once all components are assembled, double-check all bolts and nuts to ensure they are fully tightened. Gently rock the rack to confirm stability.
රූපය 2: සමීප රූපය view of the rack's handle, designed for comfortable grip during movement.
Image 3: Detail of the vertical Olympic bar holders and one of the rolling wheels.
5. මෙහෙයුම් උපදෙස්
This section details how to properly load and move your Yaheetech Barbell Bumper Plate Rack.
- Loading Plates: Carefully place bumper plates into the designated slots. It is recommended to load heavier plates towards the center or bottom of the rack for better stability. Distribute weight as evenly as possible across the four slots.
- Storing Bars: Insert Olympic barbells vertically into the two bar holders. Ensure the bars are fully seated and stable.
- Moving the Rack: To move the rack, grasp the handle firmly. Tilt the rack slightly to engage the wheels, lifting the non-wheeled end off the ground. Roll the rack to your desired location. Avoid dragging the rack without using the wheels.
- ස්ථානගත කිරීම: Always position the rack on a flat, stable surface away from high-traffic areas to prevent accidental tipping.
Image 4: The rack fully loaded with bumper plates and barbells, showcasing එහි ගබඩා ධාරිතාව.
Image 5: A closer look at bumper plates neatly organized within the rack's slots.
6. නඩත්තු කිරීම
Regular maintenance ensures the longevity and safe operation of your plate rack.
- පිරිසිදු කිරීම: දැන්වීමකින් වානේ රාමුව පිස දමන්නamp cloth to remove dust and sweat. Avoid abrasive cleaners that could damage the powder coating.
- දෘඩාංග පරීක්ෂාව: Periodically (e.g., monthly) inspect all bolts, nuts, and connections. Tighten any loose hardware to maintain structural integrity.
- රෝද පරීක්ෂාව: Check the wheels for any debris or damage that might impede smooth rolling. Clean as necessary.
- මලකඩ වැළැක්වීම: The powder-coated steel is resistant to rust, but prolonged exposure to high humidity or moisture should be avoided. If scratches occur, touch up with rust-inhibiting paint.
7. දෝශ නිරාකරණය
This section addresses common issues you might encounter with your plate rack.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Rack feels unstable or wobbly | Loose hardware; uneven weight distribution; uneven floor surface. | Tighten all bolts and nuts. Redistribute plates evenly. Move rack to a level surface. |
| රෝද සුමටව පෙරළෙන්නේ නැත | Debris in wheel mechanism; damaged wheel. | Clean wheels and axles. Inspect for damage; replace if necessary. |
| Difficulty moving the rack when loaded | Overloaded; wheels not fully engaged; rough surface. | Reduce weight if exceeding capacity. Ensure rack is tilted to engage wheels. Move on a smoother surface. |
8. පිරිවිතර
Detailed technical specifications for the Yaheetech Horizontal Barbell Bumper Plate Rack Holder.
Image 6: Dimensional diagram of the plate rack, illustrating key measurements.
| පිරිවිතර | විස්තර |
|---|---|
| ආදර්ශ අංකය | YT-00073058 |
| වෙළඳ නාමය | Yaheetech |
| නිෂ්පාදන මානයන් (LxWxH) | 37 x 13 x 11 අඟල් (93.98 x 33.02 x 29.97 cm) |
| අයිතමයේ බර | කිලෝග්රෑම් 7.7 (ආසන්න වශයෙන් රාත්තල් 17) |
| උපරිම බර ධාරිතාව | 300 රාත්තල් (136 kg) |
| ද්රව්ය | Powder-coated Steel Frame, Plastic Iron Alloy Steel |
| Number of Plate Racks | 4 |
| රෝද විෂ්කම්භය | අඟල් 2.6 |
| වර්ණය | කළු |
9. වගකීම් සහ සහාය
Yaheetech products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Yaheetech webඅඩවිය.
If you have any questions, require technical assistance, or need to report missing/damaged parts, please contact Yaheetech customer support through the retailer where the product was purchased or via the contact information provided on the official Yaheetech webඅඩවිය.
- මාර්ගගත සහාය: පිවිසෙන්න www.yaheetech.shop හි (or your regional Yaheetech website) for FAQs and contact options.
- පාරිභෝගික සේවාව: Refer to your purchase receipt or product packaging for direct customer service contact details.
