Dual DT 450 Turntable Instruction Manual

හැඳින්වීම

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Dual DT 450 manual turntable. Designed for optimal audio quality, this belt-driven turntable features a high-quality wooden housing, a balanced tonearm with adjustable tracking force, and an integrated switchable phono pre-amplifier. Please read these instructions carefully before using your turntable to ensure proper function and longevity.

නිෂ්පාදනය අවසන්view

The Dual DT 450 turntable is engineered to deliver an exceptional vinyl listening experience. Its robust construction and thoughtful features ensure stable playback and clear sound reproduction.

ප්රධාන ලක්ෂණ:

• නිර්මාණය: High-quality wooden housing for stable operation and a puristic aesthetic.
• නම්‍යශීලී බව: Connects to traditional HiFi systems via phono or AUX input; supports two speeds (33/45 RPM).
• පෙර-ampජීවිත කාලය: Built-in switchable phono pre-amplifier for easy connection.
• Magnetic Pickup System: Features an Audio Technica AT 3600 cartridge with pre-set tracking force and a damped ටෝනියර්ම් එසවීම.
• ඇතුළත් උපාංග: Turntable unit, platter with drive belt, counterweight, platter mat, dust cover, center puck, and user manual.

නිෂ්පාදනය Views:

සමස්තයක් වශයෙන් view of the Dual DT 450 Turntable with its dust cover.

සවිස්තරාත්මක view of the Audio Technica AT 3600 magnetic pickup system on the tonearm.

The Dual DT 450 Turntable with its transparent dust cover in the open position.

The Dual DT 450 Turntable with its transparent dust cover in the closed position, protecting the platter and tonearm.

සැකසුම් මාර්ගෝපදේශය

Follow these steps to correctly set up your Dual DT 450 turntable.

1. ඇසිරීම: Carefully remove all components from the packaging. Ensure all accessories listed in the product overview පවතී.
2. ස්ථානගත කිරීම: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations.
3. තහඩු සහ පටි සවි කිරීම: Place the platter onto the spindle. Carefully install the drive belt around the inner rim of the platter and around the motor pulley.
4. කවුන්ටර්වේට් ස්ථාපනය: Slide the counterweight onto the rear of the tonearm. Rotate it until the tonearm is balanced and floats freely. Then, adjust the counterweight to the recommended tracking force (refer to cartridge specifications, typically around 2-3 grams for the AT3600).
5. ස්කේටිං විරෝධී ගැලපීම: Set the anti-skating dial to match the tracking force you set. This helps prevent the stylus from skipping across the record.
6. දූවිලි ආවරණ ස්ථාපනය: Attach the dust cover hinges to the rear of the turntable unit.
7. බල සම්බන්ධතාවය: Connect the power adapter to the DC input on the rear of the turntable, then plug it into a wall outlet.
8. ශ්‍රව්‍ය සම්බන්ධතාවය: Connect the RCA cables from the turntable to your amplifier or receiver. Use the PHONO input if your amplifier has one and switch the turntable's internal pre-amplifier to 'OFF'. If your amplifier only has AUX/LINE inputs, switch the turntable's internal pre-amplifier to 'ON' and connect to an available AUX/LINE input. Ensure the ground wire is connected to your amplifier's ground terminal if available.

Setup Demonstration Video:

මෙහෙයුම් උපදෙස්

Once your Dual DT 450 is set up, follow these steps to play your vinyl records.

1. බල ගැන්වීම: Turn the power switch to the 'ON' position. The platter will begin to rotate.
2. ස්ථාන වාර්තාව: Carefully place your vinyl record onto the platter. If playing a 45 RPM single, use the included center puck.
3. වේගය තෝරන්න: Choose the correct playback speed (33 or 45 RPM) using the speed selector switch.
4. එසවුම් ස්වර අත: ටෝනියර්ම් ඔසවන්න ටෝනාර්ම් ලිෆ්ට් ලීවරය භාවිතා කරන්න.
5. ස්වර අතේ පිහිටීම: පටිගත කිරීමේ අපේක්ෂිත ආරම්භක කට්ට මතින් ස්වර බාහුව මෘදු ලෙස ගෙන යන්න.
6. පහළ ස්වරය: Slowly lower the tonearm using the tonearm lift lever. The stylus will descend onto the record, and playback will begin.
7. පරිමාව සකසන්න: ඔබගේ සම්බන්ධිත උපාංගයේ ශබ්දය සකසන්න ampඔබට අවශ්‍ය සවන්දීමේ මට්ටමට ලිෆයර් හෝ ග්‍රාහකය.
8. නැවත ධාවනය නතර කිරීම: At the end of the record, or when you wish to stop, use the tonearm lift lever to raise the tonearm, then return it to its rest. Turn the power switch to 'OFF'.

නඩත්තු කිරීම

Regular maintenance ensures optimal performance and extends the life of your turntable.

• දූවිලි ආවරණය: Clean the dust cover with a soft, dry cloth. Avoid abrasive cleaners that may scratch the surface.
• ස්ටයිලස් සත්කාර: Gently clean the stylus regularly using a soft brush designed for stylus cleaning, brushing from back to front. A dirty stylus can degrade sound quality and damage records.
• වාර්තා පිරිසිදු කිරීම: Keep your records clean to prevent dust and debris from accumulating on the stylus and affecting playback. Use a dedicated record cleaning brush or solution.
• සාමාන්ය පිරිසිදු කිරීම: Wipe the turntable chassis with a soft, slightly damp රෙදි. දරුණු රසායනික ද්රව්ය භාවිතා නොකරන්න.
• පටි පරීක්ෂාව: Periodically check the drive belt for wear or stretching. Replace if necessary to maintain accurate playback speed.

දෝෂගවේෂණය

If you encounter issues with your Dual DT 450, refer to the following common problems and solutions:

තාක්ෂණික පිරිවිතර

වගකීම් සහ සහාය

For warranty information and customer support, please refer to the documentation included with your product or visit the official Dual webවෙබ් අඩවිය. ඕනෑම වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.