1. නිෂ්පාදන අවසන්view
The Jung KNX Bus Coupler 2073 U is a system device designed for integrating KNX application modules into a KNX bus system. This component facilitates communication within the KNX network, ensuring seamless operation of connected devices. It is designed for flush-mounted installation and features a screw-fixing mechanism for secure placement.
රූපය 1: ඉදිරිපස view of the Jung KNX Bus Coupler 2073 U, illustrating its compact design and connection points. The device is marked with "JUNG Busankoppler 3 2073U" and the KNX logo, indicating its compatibility with the KNX standard.
ප්රධාන ලක්ෂණ:
- KNX Bus System Compatibility: Fully compatible with the KNX bus system.
- Mounting Type: Designed for flush-mounted installation.
- Fixing Method: Secure 3-screw fixing for reliable installation.
- Sensor/Actuator Connections: Supports 1 sensor/actuator connection.
- Integration: Facilitates the integration of KNX application modules.
2 ආරක්ෂිත තොරතුරු
Please read this manual carefully before installation and operation. Failure to follow these instructions may result in damage to the device, property, or personal injury.
- Installation must be performed by a qualified electrician in accordance with national wiring regulations and local electrical codes.
- Ensure the power supply is disconnected before any installation, maintenance, or troubleshooting work.
- උපාංගය දෘශ්යමාන ලෙස හානි වී ඇත්නම් එය ක්රියාත්මක නොකරන්න.
- උපාංගය තෙතමනය, දූවිලි සහ අධික උෂ්ණත්වයන්ගෙන් ආරක්ෂා කරන්න.
- This device is intended for commercial and private use within a KNX system.
3. පැකේජ අන්තර්ගතය
පැකේජය විවෘත කිරීමෙන් පසු සියලුම අයිතම පවතින බවත් හානි නොවී ඇති බවත් තහවුරු කර ගන්න:
- 1 x Jung KNX Bus Coupler 2073 U
- (No additional accessories or manuals are typically included with this component, as it is part of a larger system installation.)
4. පිහිටුවීම සහ ස්ථාපනය
The Jung KNX Bus Coupler 2073 U is designed for flush-mounted installation. Proper installation is crucial for the device's functionality and safety within the KNX system.
ස්ථාපන පියවර:
- සකස් කිරීම: ස්ථාපන ප්රදේශයට ප්රධාන බල සැපයුම පරිපථ කඩනයේදී ක්රියා විරහිත කර ඇති බවට සහතික වන්න.
- සවිකරන ස්ථානය: Select a suitable flush-mounted box in the wall.
- රැහැන් ඇදීම: Connect the KNX bus line to the designated terminals on the bus coupler. Refer to the wiring diagram provided with your specific KNX application module for correct pin assignments.
- Securing the Device: Insert the bus coupler into the flush-mounted box. Use the three screw fixing points to securely fasten the device to the box. Ensure it is firmly seated and stable.
- මොඩියුල ඒකාබද්ධ කිරීම: Once the bus coupler is physically installed, the KNX application module (e.g., a switch, dimmer, or sensor module) can be clicked onto the bus coupler. Ensure a secure connection.
- බල පුනස්ථාපනය: After verifying all connections are correct and secure, restore power to the circuit.
For detailed wiring diagrams and programming instructions, consult the documentation specific to the KNX application module being used with this bus coupler and the ETS (Engineering Tool Software) for KNX systems.
5. මෙහෙයුම් මූලධර්ම
The Jung KNX Bus Coupler 2073 U acts as an interface between the physical KNX bus line and the KNX application module. It does not have user-operable controls directly on the device itself. Its function is to provide the necessary electrical and data connection for the application module to communicate within the KNX network.
- දත්ත සම්ප්රේෂණය: The bus coupler transmits data signals from the KNX bus to the connected application module and vice-versa.
- බල සැපයුම: It draws power from the KNX bus line to operate the connected application module.
- අමතමින්: The addressing and configuration of the bus coupler and its associated application module are performed using the KNX ETS software. This involves assigning physical addresses and programming the desired functions.
Operation of the overall KNX system, including the functions enabled by this bus coupler, is managed through the programmed application modules (e.g., pressing a light switch, adjusting a thermostat). Refer to the specific application module's manual for operational details.
6. නඩත්තු කිරීම
The Jung KNX Bus Coupler 2073 U is a low-maintenance device. Regular cleaning and inspection are generally sufficient.
- පිරිසිදු කිරීම: If necessary, gently wipe the visible parts of the device with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or excessive moisture.
- පරීක්ෂාව: Periodically check for any signs of physical damage or loose connections. If any issues are observed, disconnect power and consult a qualified electrician.
- පරිශීලකයාට සේවය කළ හැකි කොටස් නොමැත: The device contains no user-serviceable parts. Do not attempt to open or repair the unit.
7. දෝශ නිරාකරණය
Most issues related to the bus coupler are typically system-wide KNX communication problems or issues with the connected application module. This section provides general troubleshooting steps.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| KNX device not responding. | No power to the KNX bus; incorrect wiring; faulty application module; incorrect ETS programming. | Check KNX bus power supply. Verify bus line connections to the coupler. Test the application module. Review ETS programming for correct addressing and functionality. |
| අතරමැදි සන්නිවේදනය. | Loose connections; bus line interference; faulty bus coupler. | Ensure all screw fixings and connections are tight. Check for sources of electrical interference. If issues persist, consider professional diagnosis of the bus coupler. |
| Device not recognized by ETS. | Incorrect physical address; bus line issue; ETS software problem. | Verify the physical address in ETS matches the device. Check bus line continuity. Restart ETS software and the KNX interface. |
For complex issues, it is recommended to contact a certified KNX installer or the manufacturer's technical support.
8. පිරිවිතර
| ගුණාංගය | වටිනාකම |
|---|---|
| නිෂ්පාදකයා | ජුන්ග් |
| ආදර්ශ අංකය | 2073 යූ |
| කොටස අංකය | 1 |
| නිෂ්පාදන මානයන් | 10 x 10 x 10 සෙ.මී |
| බර | ග්රෑම් 60 යි |
| වර්ණය | ලෝහ |
| පැකේජයේ ඇති ප්රමාණය | 1 |
| කොටස් ගණන | 1 |
| භාවිතය | Commercial and private use |
| පැකේජයේ අන්තර්ගතය | JUNG Busankoppler 2073U KNX 3 |
| බැටරිය අවශ්යද? | නැත |
| පළමු ලබා ගත හැකි දිනය | 25 ඔක්තෝබර් 2017 |
| බස් පද්ධතිය | KNX (Yes), KNX-Radio (No), Radio Bus (No) |
| සවිකිරීමේ වර්ගය | ෆ්ලෂ් සවි කර ඇත |
| Number of Sensor/Actuator Connections | 1 |
9. වගකීම් සහ සහාය
Jung products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the official Jung webවෙබ් අඩවියෙන් හෝ ඔබේ ප්රාදේශීය බෙදාහරින්නා අමතන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
තාක්ෂණික සහාය:
For technical assistance, installation queries, or troubleshooting beyond the scope of this manual, please contact Jung customer support or a certified KNX professional.
- නිෂ්පාදකයා Webඅඩවිය: www.jung.de (Please note: This is a general link and may not be specific to your region. ඒ සඳහා සොයන්න Jung's official website in your country.)
- KNX Association: For general information about the KNX standard and certified professionals, visit www.knx.org.
