1. හැඳින්වීම
This manual provides comprehensive instructions for the setup, operation, and maintenance of your BFT B RCB TX4 Remote Control. Please read this manual carefully before using the device to ensure proper functionality and longevity.
2. නිෂ්පාදන අවසන්view
The BFT B RCB TX4 is an ergonomic radio frequency remote control designed for various compatible devices, including televisions, DVD/Blu-ray players, set-top boxes, and audio/video receivers. It features 12 buttons and operates with a range of up to 150 meters.
රූපය 1: ඉදිරිපස view of the BFT B RCB TX4 Remote Control, showing its four main buttons and the BFT logo.
3. සැකසුම සහ ක්රමලේඛනය
The BFT B RCB TX4 remote control is designed for easy programming. The specific programming method may vary depending on the receiver unit it is being paired with. Below is a general programming procedure. Refer to your receiver's manual for precise instructions if these steps do not apply.
- ලබන්නා සූදානම් කරන්න: Locate the programming button or learn mode activation on your compatible device (e.g., gate opener, garage door opener, or other receiver). This button is often labeled "PROG," "LEARN," or "SET."
- ඉගෙනුම් ප්රකාරය සක්රිය කරන්න: Press and hold the programming button on your receiver until an indicator light (LED) illuminates or flashes, signifying that the receiver is in learn mode.
- දුරස්ථ පාලකය වැඩසටහන්ගත කරන්න: While the receiver is in learn mode, press and hold the desired button on your BFT B RCB TX4 remote control that you wish to assign to the function. Hold the button for approximately 2-3 seconds.
- ක්රමලේඛනය තහවුරු කරන්න: The indicator light on the receiver should change (e.g., flash rapidly, turn solid, or turn off) to confirm successful programming. Release the button on the remote control.
- පරීක්ෂණ ක්රියාකාරීත්වය: Press the programmed button on your BFT B RCB TX4 remote control to test its operation with the receiver.
- Program Additional Buttons (if applicable): Repeat steps 2-5 for any other buttons you wish to program for different functions or devices.
සටහන: If programming fails, ensure the remote control has fresh batteries and that you are within the operational range of the receiver. Some receivers may require a specific sequence or a master remote for programming.
4. මෙහෙයුම් උපදෙස්
Once programmed, operating the BFT B RCB TX4 remote control is straightforward:
- බොත්තම් කාර්යයන්: Each of the 12 buttons on the remote control corresponds to a specific function or device as programmed during the setup process.
- සක්රිය කිරීම: To activate a function, simply press the corresponding button firmly and release it.
- පරාසය: The remote control has an operational range of up to 150 meters in open areas. Obstructions such as walls, vehicles, or adverse weather conditions may reduce this range.
- දර්ශක ආලෝකය: Some remote controls may feature a small LED indicator that illuminates when a button is pressed, confirming signal transmission.
5. නඩත්තු කිරීම
5.1 බැටරි ප්රතිස්ථාපනය
The BFT B RCB TX4 remote control uses an alkaline battery, which is included with the device. When the remote's range decreases significantly or it stops responding, it is likely time to replace the battery.
- බැටරි මැදිරිය සොයා ගන්න: The battery compartment is typically located on the back or side of the remote control. It may be secured with a small screw or a clip.
- විවෘත මැදිරිය: Use a small screwdriver or a coin to gently open the battery compartment cover.
- පැරණි බැටරිය ඉවත් කරන්න: Carefully remove the old battery, noting its orientation (+/- terminals).
- නව බැටරිය ඇතුළු කරන්න: Insert a new alkaline battery of the same type, ensuring correct polarity.
- වසා දැමීමේ මැදිරිය: බැටරි මැදිරි කවරය ප්රතිස්ථාපනය කර එය සුරක්ෂිත කරන්න.
- පරීක්ෂණය: Test the remote control's functionality after replacing the battery.
5.2 පිරිසිදු කිරීම
To clean the remote control, use a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the device.
6. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| දුරස්ථ පාලකය ප්රතිචාර නොදක්වයි. | Dead or low battery. Incorrect programming. Out of range. | Replace battery. Re-program the remote. Move closer to the receiver. |
| අඩු කළ මෙහෙයුම් පරාසය. | Low battery. Obstructions. Interference. | Replace battery. Ensure clear line of sight. Check for sources of radio interference. |
| Remote programs but does not operate. | Incorrect programming. Receiver issue. | Verify programming steps with receiver manual. Check receiver's power and status. |
7. පිරිවිතර
- ආකෘතිය: TX4
- වෙළඳ නාමය: BFT (Manufacturer: Remote)
- ද්රව්ය: ප්ලාස්ටික්
- බොත්තම් ගණන: 12
- සම්බන්ධතා තාක්ෂණය: ගුවන්විදුලි සංඛ්යාතය
- මෙහෙයුම් පරාසය: මීටර් 150 දක්වා (විවෘත ප්රදේශය)
- බැටරි වර්ගය: ක්ෂාරීය (ඇතුළත්)
- විශේෂ ලක්ෂණ: Ergonomic නිර්මාණය
- ගැළපෙන උපාංග: Television, DVD/Blu-ray Player, Set Top Box, Audio/Video Receiver (requires compatible receiver unit)
8. වගකීම් සහ සහාය
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the retailer or manufacturer directly. Keep your proof of purchase for warranty claims.
Manufacturer: Remote
