1. හැඳින්වීම
This manual provides essential information for the safe and efficient use of your Heidelberg Wallbox Home Eco 11 kW Charging Station. Please read this manual thoroughly before installation and operation, and keep it for future reference. The Heidelberg Wallbox Home Eco is designed for reliable, safe, and fast charging of electric and hybrid vehicles equipped with a Type 2 charging socket according to IEC 62196-2 standard.
Image: Heidelberg Wallbox Home Eco 11 kW Charging Station with its integrated charging cable.
Key features of your Wallbox include:
- වේගවත් ආරෝපණය: Up to 11 kW charging power, significantly faster than standard household outlets.
- ගැළපුම: Suitable for all electric and hybrid vehicles with a Type 2 charging socket (IEC 62196-2).
- බලශක්ති කාර්යක්ෂමතාව: Efficient and energy-saving charging, with a standby mode for reduced power consumption.
- ශක්තිමත් නිර්මාණය: Durable construction suitable for both indoor and outdoor use, featuring a high-quality lacquered metal front.
2. පිහිටුවීම සහ ස්ථාපනය
The Heidelberg Wallbox Home Eco must be installed by a qualified electrician or an authorized installation service. This ensures maximum safety and compliance with all quality and safety standards.
2.1 විදුලි සම්බන්ධතාවය
The Wallbox can be connected to either a 230 Volt (single-phase) or 400 Volt (three-phase) power supply, depending on your electrical infrastructure and vehicle requirements. Consult with your energy provider or electrician to determine the available charging power at your location.
Image: Diagram illustrating the connection process for the Wallbox.
2.2 සවි කිරීම
Ensure the mounting surface is stable and capable of supporting the weight of the Wallbox (approximately 16.76 lbs or 7.6 kg). Follow the detailed mounting instructions provided in the separate installation guide for secure attachment.
Image: Heidelberg Wallbox Home Eco securely mounted on a wall, ready for use.
3. මෙහෙයුම් උපදෙස්
Operating the Heidelberg Wallbox Home Eco is straightforward once installed correctly.
3.1 Charging Your Vehicle
- Ensure your vehicle is parked safely and the ignition is off.
- Take the Type 2 charging cable from the Wallbox.
- Insert the charging plug firmly into your vehicle's charging port.
- The Wallbox will automatically begin the charging process. Indicators on the Wallbox will show the charging status.
- Once charging is complete, safely remove the plug from your vehicle and return it to the Wallbox's holder.
Image: Illustration depicting the charging process, emphasizing economic and fast charging.
Image: A man connecting the charging cable to an electric vehicle.
රූපය: සමීප ඡායාරූපයක් view of the charging cable connected to a vehicle's charging port.
Image: A woman smiling while connecting the charging cable to her electric vehicle.
3.2 ආරක්ෂිත පූර්වාරක්ෂාවන්
- Never attempt to open or repair the Wallbox yourself. Always contact a qualified professional.
- Do not use the Wallbox if the cable or plug is damaged.
- ක්රියාත්මක වන විට ළමයින් සහ සුරතල් සතුන් ආරෝපණ ප්රදේශයෙන් ඈත් කර තබන්න.
- Ensure proper ventilation around the Wallbox, especially if installed in an enclosed space.
4. නඩත්තු කිරීම
The Heidelberg Wallbox Home Eco requires minimal maintenance. Regular cleaning and inspection will ensure its longevity and optimal performance.
4.1 පිරිසිදු කිරීම
Clean the exterior of the Wallbox with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface. Ensure the Wallbox is powered off before cleaning.
4.2 පරීක්ෂා කිරීම
Periodically inspect the charging cable and plug for any signs of wear, cuts, or damage. Check the Wallbox casing for any cracks or physical damage. If any damage is observed, discontinue use immediately and contact a qualified technician for inspection and repair.
5. දෝශ නිරාකරණය
This section addresses common issues you might encounter with your Wallbox. For problems not listed here, or if solutions do not resolve the issue, contact customer support.
5.1 පොදු ගැටළු සහ විසඳුම්
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Wallbox not charging | Vehicle not properly connected; power supply issue; Wallbox error. | Ensure cable is fully inserted. Check circuit breaker. Consult Wallbox indicator lights for error codes. |
| ආරෝපණය මන්දගාමී වේ | Vehicle's charging capacity limit; power supply limitation. | Verify vehicle's maximum charging rate. Ensure Wallbox is connected to appropriate voltage (e.g., 400V for 11kW). |
| Indicator lights show an error | Internal fault; external electrical issue. | Refer to the specific error code in the full technical manual (if available) or contact a qualified electrician. |
5.2 නිතර අසන ප්රශ්න (FAQs)
- What is the charging power of the Wallbox?
Depending on the vehicle's charging capacity and the power outlet, it can charge up to 11 kW. You can inquire about the available charging power from your energy provider or electrical installer. - Which vehicles can be charged with the Wallbox?
Our Wallboxes can charge all vehicles that have a Type 2 charging socket standardized according to IEC 62196-2. - What type of plug are the Wallboxes equipped with?
The Wallboxes are supplied with a Type 2 charging plug in accordance with DIN EN 62196-2.
6. පිරිවිතර
Detailed technical specifications for the Heidelberg Wallbox Home Eco (Model: WAB000101):
| පිරිවිතර | වටිනාකම |
|---|---|
| වෙළඳ නාමය | හයිඩෙල්බර්ග් |
| ආදර්ශ අංකය | WAB000101 |
| වර්ණය | රිදී සහ කළු |
| නිෂ්පාදන මානයන් | 12D x 29W x 38.5H සෙන්ටිමීටර |
| අයිතමයේ බර | රාත්තල් 16.76 (දළ වශයෙන් කිලෝග්රෑම් 7.6) |
| ප්රතිදාන වෙළුමtage | Volts 400 (AC) |
| වත්මන් ශ්රේණිගත කිරීම | 16 A |
| උපරිම ආරෝපණ බලය | 11 kW |
| Cable Length (for this model) | මීටර් 3.5 කි |
| නිෂ්පාදකයා | Heidelberger Druckmaschinen AG |
7. වගකීම් සහ සහාය
For warranty information and customer support, please refer to the documentation included with your product or visit the official Heidelberg website. Heidelberg stands for quality and durability, and their commitment to innovative, customer-oriented solutions has been branded as Amperfied since 2014.
If you require technical assistance, have questions about installation, or need to report a fault, please contact an authorized Heidelberg service partner or a qualified electrician.
Image: The Heidelberg Amperfied brand logo.
