1. හැඳින්වීම
This manual provides instructions for the safe and effective use of the ARES 70922 Portable Parts Washer. This device is designed for degreasing small parts and tools using a standard 5-gallon bucket (not included).
රූපය 1.1: ඉවරයිview of the ARES 70922 Portable Parts Washer components.
2 ආරක්ෂිත තොරතුරු
WARNING: Read all safety instructions before operating this product.
- Use only with non-corrosive, non-solvent, water-based cleaning solutions. Using flammable or corrosive solvents can cause fire, explosion, or damage to the unit.
- Ensure the power cord and plug are in good condition before each use. Do not operate with a damaged cord or plug.
- ක්රියාත්මක වන විට අත් සහ ලිහිල් ඇඳුම් චලනය වන කොටස් වලින් ඈත් කර තබන්න.
- Always unplug the unit from the power source before performing any maintenance, cleaning, or when not in use.
- Do not submerge the entire unit (excluding the pump) in liquid. The pump is designed for submersion, but other electrical components are not.
- Operate the parts washer in a well-ventilated area.
- දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.
3. පැකේජ අන්තර්ගතය
සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:
- 1x Parts Washer Basin
- 1x Submersible Pump with Power Cord
- 1x Hard Bristle Cleaning Brush with Hose
A standard 5-gallon bucket is required for operation and is not included.
4. සැකසුම් උපදෙස්
- බාල්දිය සූදානම් කරන්න: Obtain a clean, standard 5-gallon bucket.
- පොම්පය ස්ථානගත කරන්න: Place the submersible pump at the bottom of the 5-gallon bucket. The pump is equipped with suction cups to help secure it to the bucket's base.
- නළය සම්බන්ධ කරන්න: Attach the hose from the cleaning brush to the outlet of the submersible pump. Ensure the connection is secure.
- Place the Basin: Position the parts washer basin on top of the 5-gallon bucket. The basin is designed to fit securely over the bucket's rim.
- පිරිසිදු කිරීමේ විසඳුම එකතු කරන්න: Pour your chosen non-corrosive, non-solvent, water-based cleaning solution into the basin. Ensure the liquid level is sufficient to cover the pump when it is placed in the bucket, but do not overfill the basin.
Image 4.1: Setup diagram illustrating the parts washer assembly on a 5-gallon bucket.
5. මෙහෙයුම
- බල ගැන්වීම: Plug the pump's power cord into a suitable electrical outlet. The pump will begin to circulate the cleaning solution through the brush.
- පිරිසිදු කොටස්: Place the parts to be cleaned into the basin. Use the hard bristle brush, which delivers a continuous flow of cleaning solution, to scrub and degrease the parts.
- ජලාපවහන: බීasin features a channel drainage system designed to catch waste material and return the cleaning solution to the bucket, allowing larger debris to settle at the bottom of the basin.
- විදුලිය විසන්ධි කිරීම: Once cleaning is complete, unplug the pump from the electrical outlet.
Image 5.1: Demonstrating the use of the parts washer to clean a component.
Image 5.2: Metal parts placed in the parts washer basin පිරිසිදු කිරීම සඳහා.
6. නඩත්තු කිරීම
Regular maintenance ensures the longevity and optimal performance of your parts washer.
- Cleaning the Basin: After each use, or as needed, remove the basin from the bucket and clean any accumulated debris. Rinse thoroughly with water.
- පිරිසිදු කිරීමේ විසඳුම ප්රතිස්ථාපනය: Replace the cleaning solution regularly, especially when it becomes heavily soiled or its effectiveness diminishes. Dispose of used cleaning solution according to local environmental regulations.
- පොම්ප පරීක්ෂාව: Periodically inspect the submersible pump for any blockages or debris that may affect its operation. Unplug the pump before inspection.
- බුරුසු පිරිසිදු කිරීම: Clean the bristles of the brush after use to prevent buildup and maintain cleaning effectiveness.
- ගබඩා: When not in use, clean and dry all components. Store the parts washer in a clean, dry place.
7. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Pump does not turn on or circulate liquid. | No power; Pump clogged; Insufficient liquid. | Check power connection. Ensure pump is fully submerged. Unplug and inspect pump for debris. |
| Reduced flow from brush. | Hose kinked; Pump partially clogged; Low liquid level. | Check hose for kinks. Unplug and inspect pump for debris. Add more cleaning solution. |
| Parts not cleaning effectively. | Cleaning solution is old/dirty; Incorrect cleaning solution type. | Replace cleaning solution. Ensure a suitable water-based, non-corrosive solution is used. |
8. පිරිවිතර
- ආකෘතිය: 70922 ක් වේ
- මානයන් (L x W x H): අඟල් 13.75 x 13.75 x 5.12
- බර: රාත්තල් 3.85 කි
- පොම්ප ප්රවාහ අනුපාතය: 1 Gallon Per Minute (GPM)
- Bucket Compatibility: Standard 5-Gallon Buckets (not included)
- නිර්දේශිත පිරිසිදු කිරීමේ විසඳුම: Non-corrosive, non-solvent, water-based solutions
- UPC: 818765028326
Image 8.1: Submersible pump and cleaning brush assembly.
Image 8.2: Detail of the hard bristle cleaning brush.
9. වගකීම් සහ සහාය
ARES products are backed by a Performance Assurance. If you encounter any issues with your ARES Portable Parts Washer, please contact customer service for assistance with troubleshooting, parts, replacement, or refund.
For customer support, please refer to the contact information provided with your purchase or visit the official ARES webඅඩවිය.
