Barkbusters B-025 Bar End Mounting Kit User Manual

හැඳින්වීම

This manual provides detailed instructions for the proper installation, use, and maintenance of your Barkbusters B-025 Bar End Mounting Kit. This kit is designed to securely mount accessories to handlebars with a 10mm internal diameter (ID) using alloy inserts. Please read this manual thoroughly before beginning installation to ensure correct assembly and safe operation.

For specific fitment information, this kit is compatible with Husqvarna models featuring tapered handlebars from 2008 onwards.

පැකේජයේ අන්තර්ගතය

Verify that all components listed below are present in your kit before proceeding with installation:

• 2 x Alloy Bar End Inserts (cylindrical, slotted)
• 2 x Threaded Inserts (for securing components)
• Required fasteners (not explicitly listed in product data, but implied for a kit)

රූපය 1: Components of the Barkbusters B-025 Bar End Mounting Kit. The image displays two silver-colored, cylindrical alloy inserts with slotted ends, and two smaller, silver-colored threaded inserts designed to fit within them.

වැදගත් ආරක්ෂක තොරතුරු

Always prioritize safety during installation and use. Failure to follow these instructions may result in damage to the product, motorcycle, or personal injury.

• ඕනෑම වැඩක් ආරම්භ කිරීමට පෙර යතුරුපැදිය ස්ථාවරව තබා ක්‍රියා විරහිත කර ඇති බවට වග බලා ගන්න.
• අත්වැසුම් සහ අක්ෂි ආරක්ෂාව වැනි සුදුසු පුද්ගලික ආරක්ෂක උපකරණ (PPE) පළඳින්න.
• ඔබට කිසියම් පියවරක් ගැන සැකයක් ඇත්නම්, සුදුසුකම් ලත් කාර්මිකයෙකුගෙන් විමසන්න.
• Do not overtighten fasteners, as this can strip threads or damage components. Refer to torque specifications if available for your specific application.
• Regularly check the security of all mounted components, especially after the first ride and periodically thereafter.

ස්ථාපන උපදෙස්

Follow these steps carefully to install the Barkbusters B-025 Bar End Mounting Kit:

1. Prepare Handlebars: Ensure the internal diameter of your handlebars is 10mm. Remove any existing bar end weights or accessories from the handlebar ends. Clean the inside of the handlebar thoroughly to remove any debris or corrosion.
2. Insert Alloy Sleeve: Carefully slide one of the alloy bar end inserts (the cylindrical, slotted component) into the open end of the handlebar. The slotted end should face inwards, allowing for expansion.
3. Position Threaded Insert: Place one of the threaded inserts into the alloy sleeve. Ensure it aligns correctly with the internal threads of the sleeve.
4. ආරක්ෂිත එකලස් කිරීම: Insert the appropriate bolt (not included in the provided product data, but necessary for assembly) through your desired accessory (e.g., handguard, mirror mount) and into the threaded insert.
5. බෝල්ට් තද කරන්න: Gradually tighten the bolt. As the bolt is tightened, it will pull the threaded insert outwards, causing the slotted alloy sleeve to expand and grip the inside of the handlebar. Tighten until the assembly is firm and secure, but do not overtighten.
6. අනෙක් පැත්ත සඳහා නැවත කරන්න: Repeat steps 2-5 for the other handlebar end.
7. අවසාන පරීක්ෂාව: After installation, firmly check both bar end mounts to ensure they are securely fastened and do not rotate or move.

භාවිතය සහ අනුකූලතාව

The Barkbusters B-025 Bar End Mounting Kit provides a stable and secure anchor point for various motorcycle accessories. Once installed, these inserts allow for the attachment of handguards, bar-end mirrors, or other compatible accessories that utilize a bar-end mounting system.

This kit is specifically designed for handlebars with a 10mm internal diameter. Verify your handlebar's internal diameter before attempting to install this kit to ensure proper fitment and safety.

නඩත්තු කිරීම

Regular maintenance ensures the longevity and safety of your Barkbusters B-025 Bar End Mounting Kit:

• වරින් වර පරීක්ෂා කිරීම: Regularly inspect the bar end mounts for any signs of loosening, wear, or damage. This is especially important after off-road riding or long trips.
• තද බව පරීක්ෂා කිරීම: Re-tighten the mounting bolts if any movement or looseness is detected. Do not overtighten.
• පිරිසිදු කිරීම: Clean the components with a mild soap and water solution. Avoid harsh chemicals that may damage the finish or material.
• විඛාදන වැළැක්වීම: If riding in wet or corrosive environments, consider applying a light coat of anti-corrosion spray to exposed metal parts, avoiding areas that require friction for grip.

දෝෂගවේෂණය

If you encounter issues during installation or use, refer to the following common problems and solutions:

පිරිවිතර

වගකීම් සහ සහාය

Specific warranty details for the Barkbusters B-025 Bar End Mounting Kit are not provided within the available product information. For warranty claims, technical support, or further assistance, please contact Barkbusters directly or refer to their official webඅඩවිය.

Manufacturer: Bark Busters

For additional product information or support, please visit the Barkbusters Brand Page on Amazon.