Digoo DG-HOSA Home Security System User Manual

1. හැඳින්වීම

This manual provides detailed instructions for the installation, operation, and maintenance of the Digoo DG-HOSA 433MHz Home Security System. This system includes a Wireless Infrared PIR Detector, Wireless Guarding Windows Doors Sensor, External Wired Alert Siren, Wireless Remote RF Controller, and Wireless Remote Doorbell Button.

නිසි ක්‍රියාකාරිත්වය සහ ආරක්ෂාව සහතික කිරීම සඳහා නිෂ්පාදිතය භාවිතා කිරීමට පෙර කරුණාකර මෙම අත්පොත හොඳින් කියවන්න.

Image: Digoo DG-HOSA PIR Detector. This image shows the main PIR detector unit, which is a white, rectangular device with rounded corners, featuring the "DIGOO" logo on its lower front face.

2. පද්ධති සංරචක

The Digoo DG-HOSA system comprises several key components designed to provide comprehensive home security:

• Wireless Infrared PIR Detector: Detects motion within its range.
• Wireless Guarding Windows Doors Sensor: Monitors the opening and closing of doors and windows.
• External Wired Alert Siren: Emits a loud alarm sound when triggered.
• Wireless Remote RF Controller: Allows for arming, disarming, and panic functions remotely.
• Wireless Remote Doorbell Button: Functions as a doorbell when pressed.

3. තාක්ෂණික පිරිවිතර

Note: All wireless components operate on a 433MHz frequency. Operating temperature for most components is -10℃ to 55℃.

4. පිහිටුවීම සහ ස්ථාපනය

4.1. බැටරි ස්ථාපනය

Ensure all components have their respective batteries installed. The PIR Detector uses 2x AAA batteries, and the Window/Door Sensor, RF Controller, and Doorbell Button use button batteries. Batteries are typically pre-installed for convenience.

4.2. Wireless Infrared PIR Detector Placement

Install the PIR Detector at a recommended height of 1.8m-2.2m (approximately 5.9ft-7.2ft) from the floor. Place it in areas where motion detection is critical, such as hallways, living rooms, or entry points. Avoid direct sunlight or areas with significant temperature fluctuations to prevent false alarms.

4.3. Wireless Guarding Windows Doors Sensor Installation

The Window/Door Sensor consists of two parts: a main unit and a magnetic strip. Mount these two parts on a door or window frame so that they are aligned and within 25-35mm of each other when the door/window is closed. When the door/window opens, the magnetic contact is broken, triggering the alarm. Use the included adhesive or screws for secure mounting.

4.4. External Wired Alert Siren Connection

Connect the External Wired Alert Siren to the main alarm panel (if applicable) or a compatible power source using its 3.5mm connector. Ensure the siren is placed in a location where its sound can be effectively heard, typically near an entry point or in a central area of the property.

4.5. Wireless Remote RF Controller and Doorbell Button

The RF Controller and Doorbell Button are pre-paired with the system. The Doorbell Button can be conveniently stuck near your door. No specific installation is required beyond placing them in an accessible location.

5. මෙහෙයුම් උපදෙස්

5.1. පද්ධතිය සන්නද්ධ කිරීම

To arm the system, press the "Arm" button on the Wireless Remote RF Controller. The system will typically provide an audible confirmation (e.g., a single beep) indicating it is armed. Once armed, the PIR Detector and Window/Door Sensors will actively monitor for intrusions.

5.2. පද්ධතිය නිරායුධ කිරීම

To disarm the system, press the "Disarm" button on the Wireless Remote RF Controller. An audible confirmation (e.g., two beeps) will indicate the system is disarmed. This will deactivate the sensors and siren.

5.3. භීතිකා ක්‍රියාකාරිත්වය

In case of an emergency, press the "Panic" button on the Wireless Remote RF Controller. This will immediately trigger the External Wired Alert Siren, regardless of the system's armed status.

5.4 දොර සීනුව කාර්යය

When someone presses the Wireless Remote Doorbell Button, the DG-HOSA system will emit a doorbell sound, alerting occupants to a visitor.

6. නඩත්තු කිරීම

6.1. බැටරි ප්රතිස්ථාපනය

Regularly check the battery status of all wireless components. Replace batteries promptly when they are low to ensure continuous operation. Refer to the specifications section for battery types for each component.

• PIR Detector: 2x AAA batteries.
• Window/Door Sensor: 3V Button Battery.
• RF Controller: Button Batteries.
• Doorbell Button: Button Batteries.

Note: The Window/Door Sensor includes under-voltage monitoring at 7.5V +/- 0.5V.

6.2 පිරිසිදු කිරීම

Wipe the exterior of all components with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device surfaces.

6.3. Sensor Alignment Check

Periodically verify that the two parts of the Window/Door Sensor remain properly aligned and within the specified triggering distance (25-35mm) when the door or window is closed.

7. දෝශ නිරාකරණය

8. වගකීම් තොරතුරු

Specific warranty details for Digoo products may vary by region and retailer. Please refer to your purchase documentation or contact your point of sale for information regarding warranty coverage and terms.

9. පාරිභෝගික සහාය

For technical assistance, troubleshooting not covered in this manual, or product inquiries, please contact Digoo customer support through their official website or the retailer from whom you purchased the product. Keep your product model number (DG-HOSA) and purchase details ready when contacting support.

For more information, visit the official Digoo webඅඩවිය: www.digoo.cc