Littelfuse FLNR045

උපදෙස් අත්පොත

Littelfuse FLNR045 FUS 250V T/D Class RK5 45A

1. හැඳින්වීම

This manual provides essential information for the safe and effective use of the Littelfuse FLNR045 FUS 250V T/D Class RK5 45A fuse. Please read this manual thoroughly before installation or operation and retain it for future reference. This fuse is designed for use in panel accessories and electrical systems requiring reliable overcurrent protection.

2 ආරක්ෂිත තොරතුරු

අවවාදයයි: Electrical shock hazard. Improper installation or use of this product can result in serious injury or death. Always follow local electrical codes and safety regulations.

3. නිෂ්පාදන විස්තරය සහ විශේෂාංග

The Littelfuse FLNR045 is a 45 Amp, 250 Volt, Class RK5, dual-element, time-delay fuse. It is designed to provide superior protection for motors and other inductive loads against both overloads and short-circuits. Its time-delay characteristic allows for temporary inrush currents without nuisance opening, while still providing fast-acting protection under short-circuit conditions.

Littelfuse FLNR045 Class RK5 Time-Delay Fuse

Figure 3.1: A Littelfuse FLNR045 Class RK5 time-delay fuse. This image shows the cylindrical body of the fuse with the Littelfuse brand and "CLASS RK5 Time Delay Dual Element" visible on its label.

ප්රධාන ලක්ෂණ:

4. පිහිටුවීම සහ ස්ථාපනය

Installation of the FLNR045 fuse should only be performed by a qualified electrician in accordance with all applicable national and local electrical codes.

  1. පරිපථය විසන්ධි කරන්න: Before beginning any work, ensure that the circuit where the fuse is to be installed or replaced is completely de-energized. Verify with a voltagඊ පරීක්ෂක.
  2. ෆියුස් රඳවනය හඳුනා ගන්න: Locate the appropriate fuse holder or disconnect switch for the circuit requiring protection.
  3. Insert Fuse: Carefully insert the FLNR045 fuse into the fuse clips or holder, ensuring a secure and proper connection. Do not force the fuse.
  4. ස්ථාපනය සත්‍යාපනය කරන්න: Double-check that the fuse is seated correctly and that all connections are tight.
  5. පරිපථය නැවත පණගන්වන්න: ස්ථාපනය සම්පූර්ණ කර සත්‍යාපනය කළ පසු, පරිපථයට බලය ප්‍රතිස්ථාපනය කරන්න.

It is critical to match the fuse's voltagඊ සහ amperage ratings to the circuit's requirements. Using a fuse with an incorrect rating can lead to system failure or hazardous conditions.

5. මෙහෙයුම් මූලධර්ම

The Littelfuse FLNR045 is a current-limiting, time-delay fuse. This means it is designed to:

The time-delay feature is particularly beneficial in circuits with inductive loads that draw high inrush currents upon startup, preventing unnecessary fuse blows and ensuring continuous operation.

6. නඩත්තු කිරීම

Fuses are generally maintenance-free components. However, periodic inspection of the fuse and its holder is recommended as part of routine electrical system maintenance.

7. දෝශ නිරාකරණය

If a circuit protected by the FLNR045 fuse loses power, the fuse may have blown due to an overcurrent condition. Follow these steps:

  1. පරිපථය විසන්ධි කරන්න: Immediately disconnect power to the affected circuit at the main panel.
  2. පිඹින ලද ෆියුස් හඳුනා ගන්න: Carefully remove the fuse (using appropriate tools if necessary) and test it with a multimeter for continuity. A blown fuse will show an open circuit (no continuity).
  3. Investigate Cause: Before replacing the fuse, identify and rectify the cause of the overcurrent. Common causes include:
    • Short-circuit in wiring or equipment.
    • Overloaded circuit (too many devices drawing power).
    • Faulty appliance or motor.
  4. ෆියුස් ප්රතිස්ථාපනය කරන්න: Once the fault is cleared, replace the blown fuse with a new Littelfuse FLNR045 fuse. Ensure the replacement fuse has the exact same ratings.
  5. Re-energize and Monitor: Restore power and monitor the circuit for proper operation. If the new fuse blows immediately, there is still an unresolved issue in the circuit that requires professional attention.

Do not repeatedly replace fuses without addressing the underlying problem, as this can lead to serious electrical hazards.

8. පිරිවිතර

පිරිවිතරවටිනාකම
ආදර්ශ අංකයFLNR045
වෙළඳ නාමයලිට්ල්ෆියුස්
වෙළුමtagඊ ශ්‍රේණිගත කිරීම250 වෝල්ට් ඒසී
Amperage ඇගයීම45 Amps
ෆියුස් පන්තියRK5
ලක්ෂණයTime-Delay, Dual-Element
ද්රව්යStone (Insulating Body)
අනුකූල වීමUL ලැයිස්තුගත කර ඇත
ප්රවර්ගයPanel Accessories, Fuse

9. වගකීම් සහ සහාය

For information regarding warranty, technical support, or service for your Littelfuse FLNR045 fuse, please contact Littelfuse directly through their official webවෙබ් අඩවිය හෝ පාරිභෝගික සේවා නාලිකා. ඕනෑම වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

Littelfuse Official Webඅඩවිය: www.littelfuse.com

අදාළ ලියකියවිලි - FLNR045

පෙරview Littelfuse JLLN Series Class T Fuses | Fast-Acting, High Interrupting Capacity
Explore Littelfuse JLLN Series Class T fuses, offering compact design, fast-acting overload and short-circuit protection, and high interrupting ratings up to 200,000 AIR. Ideal for drives, inverters, and power supplies. View specifications, ordering information, and dimensions.
පෙරview Littelfuse P6SMB ශ්‍රේණියේ 600W මතුපිට සවිකිරීමේ TVS ඩයෝඩ දත්ත පත්‍රිකාව
Littelfuse P6SMB ශ්‍රේණියේ 600W මතුපිට සවිකිරීමේ තාවකාලික වෙළුම සඳහා දත්ත පත්‍රිකාවtage Suppressor (TVS) ඩයෝඩ. විශේෂාංග, ප්‍රතිලාභ, විද්‍යුත් ලක්ෂණ, ශ්‍රේණිගත කිරීම්, වක්‍ර, පෑස්සුම් පරාමිතීන්, භෞතික හා පාරිසරික පිරිවිතර සහ කොටස් අංකනය කිරීමේ තොරතුරු ඇතුළත් වේ.
පෙරview CT හැරවුම් අනුපාත වෙනස් කිරීමේ මාර්ගෝපදේශය: Littelfuse තාක්ෂණික සටහන
මෙම තාක්ෂණික සටහන සමඟින් ලිටෙල්ෆියුස් ධාරා ට්‍රාන්ස්ෆෝමර් (CT) වල හැරීම් අනුපාතය වෙනස් කරන්නේ කෙසේදැයි ඉගෙන ගන්න, හැරීම් එකතු කිරීමේ සහ අඩු කිරීමේ ක්‍රම සහ ප්‍රායෝගික උදාහරණ ඇතුළුව.ampCT ක්‍රියාකාරිත්වයේ මූලධර්ම සහ අනුපාත ගැලපීම් තේරුම් ගන්න.
පෙරview PTS526 Series Microminiature SMT Top Actuated Tactile Switch Datasheet
Datasheet for the Littelfuse PTS526 Series microminiature SMT top-actuated tactile switch. Features a 5.2 x 5.2 mm footprint, variable heights, and multiple actuation forces, suitable for IoT, home automation, and remote control applications. Includes detailed specifications, mechanical characteristics, dimensions, and ordering information.
පෙරview Ground-Fault Monitoring in Adjustable-Speed Drive Applications | Littelfuse Technical Note
Technical note from Littelfuse on ground-fault monitoring for adjustable-speed drives (VFDs) using SE-700 and EL731 series relays. Covers issues, filtering, recommended settings, and current transformer location for resistance-grounded systems.
පෙරview Littelfuse 55505 Series Hall Effect Geartooth Speed Sensor Datasheet
Datasheet for the Littelfuse 55505 Series Hall Effect Flange Mount Geartooth Speed Sensor, detailing its features, applications, electrical ratings, and part numbering system for industrial, commercial, and automotive use.