DENALI TT-SB.10100.B

DENALI SoundBomb Split Dual-Tone Air Horn

Model: TT-SB.10100.B

1. හැඳින්වීම

The DENALI SoundBomb Split Dual-Tone Air Horn is an advanced acoustic warning device designed for motorcycles, offering a powerful 120dB sound output at approximately 1 meter. Its unique split design allows the compressor and acoustic unit to be mounted separately, providing greater installation flexibility, especially for vehicles with limited space. This manual provides essential information for the proper installation, operation, and maintenance of your SoundBomb Split horn.

2 ආරක්ෂිත තොරතුරු

Please read and understand all safety instructions before installing and operating the horn. Failure to do so may result in product damage, property damage, or personal injury.

3. පැකේජ අන්තර්ගතය

පහත ලැයිස්තුගත කර ඇති සියලුම සංරචක ඔබේ පැකේජයේ ඇති බව තහවුරු කරගන්න:

Image showing the components of the DENALI SoundBomb Split Dual-Tone Air Horn kit, including the compressor, acoustic unit, relay, hose, and cable ties.

This image displays all the components included in the DENALI SoundBomb Split Dual-Tone Air Horn kit. Visible are the main acoustic horn unit, the separate air compressor, a flexible hose to connect them, a 12V relay for electrical connection, and several cable ties for mounting and wire management.

4. පිහිටුවීම සහ ස්ථාපනය

The DENALI SoundBomb Split horn is designed for flexible installation. The compressor can be mounted up to 3 feet (approximately 1 meter) away from the acoustic unit, allowing for optimal placement on various motorcycle models, including those with fairings or limited space.

4.1 සවි කිරීම

  1. Identify suitable mounting locations for both the acoustic unit and the compressor. Ensure they are protected from direct water spray and road debris.
  2. Securely mount the acoustic unit and compressor using appropriate hardware (not included, unless specified).
  3. Connect the acoustic unit to the compressor using the provided 3-foot air hose. Ensure a tight seal to prevent air leaks.

4.2. විදුලි සම්බන්ධතාවය

  1. The SoundBomb horn requires a 12V power source and draws 20A. It is compatible with CANbus electrical systems.
  2. Utilize the included 12V 30A relay for proper power management and to protect your motorcycle's electrical system.
  3. Connect the horn's wiring to the relay according to the relay's diagram. Typically, this involves connecting to a switched 12V source, ground, and the horn trigger wire from your motorcycle's existing horn button.
  4. Ensure all connections are crimped securely and insulated with heat shrink tubing or electrical tape.
  5. Once all connections are made, re-connect the vehicle's battery.

For detailed wiring diagrams, please refer to the specific instructions provided with your relay or consult a professional.

5. මෙහෙයුම් උපදෙස්

Once properly installed, the DENALI SoundBomb Split horn operates like your motorcycle's standard horn. Simply press your motorcycle's horn button to activate the SoundBomb. The horn will produce its loud, dual-tone sound as long as the button is pressed.

6. නඩත්තු කිරීම

The DENALI SoundBomb Split horn is designed for durability and requires minimal maintenance.

7. දෝශ නිරාකරණය

If you experience issues with your SoundBomb Split horn, refer to the following common troubleshooting steps:

ගැටලුවවිය හැකි හේතුවවිසඳුම
Horn does not soundNo power to the horn/relay; Blown fuse; Loose electrical connection; Faulty relay.Check fuse in the horn circuit; Verify 12V power at the relay and horn; Inspect all wiring connections; Test or replace the relay.
Horn sounds weak or inconsistentAir leak in hose connection; Low voltage; Compressor issue.Check air hose connections for leaks; Ensure battery voltage is adequate; Contact support if compressor is suspected faulty.
Horn sounds continuouslyStuck horn button; Faulty relay.Check motorcycle horn button for proper operation; Test or replace the relay.

8. පිරිවිතර

විශේෂාංගයවිස්තර
ශබ්ද ප්රතිදානය120dB at 3 feet (approx. 1 meter)
වත්මන් දිනුම් ඇදීම20A
සම්පීඩක මානයන්114.3 x 73.66 x 76.2 mm (අඟල් 4.5 x 2.9 x 3.0)
Acoustic Unit Dimensions104.14 x 93.98 x 86.36 mm (අඟල් 4.1 x 3.7 x 3.4)
නිර්මාණයAll-black, compact, CANbus compatible
සම්භවයDesigned in USA, Manufactured in Italy

9. වගකීම් සහ සහාය

For information regarding warranty coverage and technical support, please refer to the documentation provided at the time of purchase or visit the official DENALI webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

අදාළ ලියකියවිලි - TT-SB.10100.B

පෙරview DENALI Split Horn Mounting Bracket HMT.07.11002 ස්ථාපන අත්පොත
BMW R1250GS සඳහා වන DENALI Split Horn Mounting Bracket (HMT.07.11002) සඳහා නිල උපදෙස් අත්පොත. ස්ථාපන පියවර, දෘඩාංග මාර්ගෝපදේශය සහ ව්‍යවර්ථ පිරිවිතර ඇතුළත් වේ.
පෙරview DENALI සවුන්ඩ් බෝම්බ ස්ප්ලිට් හෝන් මවුන්ට් ස්ථාපන අත්පොත - BMW R1300GS (HMT.07.11200)
BMW R1300GS යතුරුපැදිවල DENALI Sound Bomb Split Horn Mount (මාදිලිය HMT.07.11200) සඳහා සවිස්තරාත්මක ස්ථාපන මාර්ගෝපදේශය. කට්ටල අන්තර්ගතය, අවශ්‍ය මෙවලම්, ව්‍යවර්ථ පිරිවිතර සහ ධ්වනි ඒකකය සහ සම්පීඩකය සවි කිරීම සඳහා පියවරෙන් පියවර උපදෙස් ඇතුළත් වේ.
පෙරview BMW R1200/R1250 ශ්‍රේණි සඳහා DENALI GEN II CANsmart පාලකය: ස්ථාපනය සහ පරිශීලක මාර්ගෝපදේශය
BMW R1200 LC සහ R1250 ශ්‍රේණියේ යතුරුපැදිවල DENALI GEN II CANsmart පාලකය ස්ථාපනය කිරීම සහ ක්‍රියාත්මක කිරීම සඳහා පුළුල් මාර්ගෝපදේශය. ප්ලග්-එන්-ප්ලේ උපාංග පාලනය, අභිරුචිකරණය කළ හැකි සැකසුම් සහ ස්මාර්ට් තිරිංග ආලෝක ක්‍රියාකාරිත්වය ඇතුළත් වේ.
පෙරview හාර්ලි ඩේවිඩ්සන් පෑන් ඇමරිකා සඳහා DENALI හෝන් සවිකිරීමේ වරහන - ස්ථාපන අත්පොත
හාර්ලි ඩේවිඩ්සන් පෑන් ඇමරිකා සඳහා DENALI හෝන් සවිකිරීමේ වරහන (HMT.23.10100) සඳහා නිල උපදෙස් අත්පොත. ස්ථාපන පියවර, ව්‍යවර්ථ පිරිවිතර සහ කට්ටල අන්තර්ගතයන් ඇතුළත් වේ.
පෙරview DENALI D7 LED Light Pod ස්ථාපන මාර්ගෝපදේශය
DENALI D7 LED Light Pod (DNL.D7.050) සඳහා නිල උපදෙස් අත්පොත. ස්ථාපන ඉඟි, දෘඩාංග ව්‍යවර්ථ පිරිවිතර, සවිකිරීමේ ස්ථාන සහ යතුරුපැදි සඳහා ඉලක්ක කිරීමේ ක්‍රියා පටිපාටි ආවරණය කරයි.
පෙරview DENALI CANsmart Controller Installation and Operation Manual
Comprehensive guide for installing and operating the DENALI CANsmart Controller, including wiring, software setup, and troubleshooting for motorcycle accessories.