RICOO TS2711 Universal Monitor Desk Mount Instruction Manual

1. හැඳින්වීම

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your RICOO TS2711 Universal Monitor Desk Mount. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and use are crucial for optimal performance and safety.

2 ආරක්ෂිත තොරතුරු

• Ensure that the mounting surface (desk) can support the combined weight of the monitor arm and your monitor.
• උපරිම බර ධාරිතාව කිලෝග්‍රෑම් 8 (රාත්තල් 17.6) නොඉක්මවන්න.
• Verify that your monitor's VESA mounting pattern is compatible (75x75mm or 100x100mm).
• Always use the provided hardware. If any parts are missing or damaged, contact customer support.
• Perform installation with care to prevent injury or damage to equipment. It is recommended to have assistance during monitor attachment.
• ස්ථාපනය අතරතුර ළමුන් සහ සුරතල් සතුන් ඈත් කර තබන්න.

3. පැකේජ අන්තර්ගතය

ස්ථාපනය ආරම්භ කිරීමට පෙර සියලුම සංරචක තිබේදැයි පරීක්ෂා කරන්න:

• මොනිටර් බාහු එකලස් කිරීම
• මේසය Clamp පදනම
• වීසා තහඩුව
• සවි කිරීමේ දෘඩාංග (ඉස්කුරුප්පු, රෙදි සෝදන යන්ත්‍ර, ස්පේසර්)
• Tools (Allen keys)
• උපදෙස් අත්පොත

රූපය 3.1: ඉවරයිview of the RICOO TS2711 Monitor Desk Mount components.

4. පිරිවිතර

Image 4.1: Visual representation of VESA compatibility (75x75mm, 100x100mm) and supported screen sizes (13-30 inches).

Image 4.2: Technical drawing illustrating the dimensions and range of motion for the TS2711 monitor arm.

5. පිහිටුවීම සහ ස්ථාපනය

5.1 මේසය Clamp ස්ථාපනය

1. මේසය cl අමුණන්නamp base to the main pole of the monitor arm.
2. cl ස්ථානගත කරන්නamp on the edge of your desk. Ensure the desk thickness is between 10mm and 88mm for secure attachment.
3. cl එක තද කරන්නamp screw firmly until the arm is stable on the desk. Do not overtighten.

5.2 Monitor Attachment

1. Carefully lay your monitor face down on a soft, clean surface.
2. Identify the VESA mounting holes on the back of your monitor.
3. Attach the VESA plate to the back of your monitor using the appropriate screws and washers from the hardware kit. For curved monitors or monitors with recessed VESA holes, use the provided spacers if necessary.
4. With assistance, lift the monitor with the attached VESA plate and slide it onto the monitor arm's mounting head.
5. Secure the monitor to the arm by tightening the locking screw on the VESA head.

Image 5.1: The RICOO TS2711 monitor arm securely installed on a desk with a monitor.

5.3 කේබල් කළමනාකරණය

The monitor arm features integrated cable clips to keep your workspace tidy.

1. Route your monitor's power and video cables along the arm.
2. Use the provided cable clips to secure the cables to the underside of the arm and along the main pole.
3. ආතතියකින් තොරව සම්පූර්ණ පරාසයක චලනයකට ඉඩ සැලසීමට කේබල් ප්‍රමාණවත් ස්ලැක් ඇති බවට වග බලා ගන්න.

Image 5.2: Detail of the cable management system, showing how cables can be routed along the arm for a clean setup.

6. මෙහෙයුම් උපදෙස් (ගැලපීම්)

The RICOO TS2711 monitor arm offers various adjustment options to customize your viewඅත්දැකීමෙන්.

6.1 උස ගැලපීම

To adjust the monitor height, loosen the collar on the main pole, slide the arm to the desired height, and then firmly tighten the collar to secure the position.

Image 6.1: Illustration of the height adjustment feature, allowing the monitor to be moved up or down along the main pole.

6.2 Swivel, Tilt, and Rotation

The arm allows for flexible positioning of your monitor:

• කරකැවීම: The arm joints allow for 180-degree swivel, and the VESA plate can swivel 360 degrees, enabling you to position your monitor left or right.
• ඇලවීම: The monitor can be tilted +/- 45 degrees to reduce glare and find the optimal viewing කෝණය.
• භ්රමණය: The VESA plate supports 360-degree rotation, allowing you to switch between landscape and portrait orientations.

Adjustments can be made by gently moving the monitor to the desired position. If the monitor does not hold its position, refer to the troubleshooting section for tension adjustments.

Image 6.2: Demonstrates the monitor's ability to swivel up to 180 degrees, tilt up to 90 degrees, and rotate 360 degrees.

7. නඩත්තු කිරීම

• පිරිසිදු කිරීම: මෘදු, d තුණ්ඩයකින් මොනිටර අත පිස දමන්න.amp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක වලින් වළකින්න.
• වරින් වර පරීක්ෂා කිරීම්: Regularly check all screws and connections to ensure they remain tight and secure. Re-tighten if necessary.
• ලිහිසි තෙල්: No lubrication is required for the moving parts.

8. දෝශ නිරාකරණය

• එල්ලා වැටීම් නිරීක්ෂණය කරන්න හෝ ස්ථානය රඳවා නොගන්න: The tension in the arm joints may need adjustment. Use the provided Allen key to tighten the screws at the joints until the monitor holds its position firmly.
• Arm is Too Stiff to Move: The tension in the arm joints may be too high. Use the provided Allen key to slightly loosen the screws at the joints until the arm moves smoothly.
• මේසය Clamp is Loose: මේසය cl සහතික කරන්නamp screw is fully tightened against the desk surface. Verify that the desk thickness is within the supported range.
• Monitor Not Level: Adjust the tilt mechanism or the VESA plate rotation to level the monitor.

9. වගකීම් සහ සහාය

For warranty information, please refer to the documentation included with your product or visit the official RICOO website. If you encounter any issues or require technical assistance, please contact RICOO customer support through their official channels or the retailer where the product was purchased.