M-Wave TW-3/10 Torque Wrench User Manual

හැඳින්වීම

The M-Wave TW-3/10 Torque Wrench is a precision tool designed for applying specific torque values to fasteners, primarily for bicycle components. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your torque wrench.

This M-Wave Torque wrench scales from 3 - 10 Nm. It comes with allen key sizes of 2, 3, 4, 5, and 6 mm. It also comes with a T25 Star screwdriver bit and a philips screwdriver bit.

Image: The M-Wave TW-3/10 Torque Wrench, showcasing the main unit and the assortment of included bits.

සැලසුම

Before using your M-Wave TW-3/10 Torque Wrench, ensure all components are present and in good condition. The wrench comes with a selection of interchangeable bits for various fastener types.

1. යතුර ඉවත් කරන්න: Carefully remove the torque wrench and all included bits from their packaging.
2. සංරචක පරීක්ෂා කරන්න: Check the wrench body and all bits for any signs of damage or wear. Do not use if any part appears damaged.
3. Identify Bits: Familiarize yourself with the different bit types and sizes:
   • Allen Key Sizes: 2mm, 3mm, 4mm, 5mm, 6mm
   • Star Screwdriver Bit: T25
   • Philips Screwdriver Bit
4. නිවැරදි බිට් එක තෝරන්න: Choose the appropriate bit for the fastener you intend to tighten.
5. බිට් ඇතුළු කරන්න: Firmly insert the selected bit into the hexagonal receiver at the end of the torque wrench. Ensure it is fully seated and secure.

රූපය: සවිස්තරාත්මක view of the various bits included with the M-Wave torque wrench, showing their different shapes and sizes.

මෙහෙයුම් උපදෙස්

The M-Wave TW-3/10 Torque Wrench is designed for precise torque application within its specified range. Always refer to the manufacturer's recommended torque settings for the component you are working on.

1. Determine Required Torque: Identify the correct torque specification (in Newton-meters, Nm) for the fastener you are tightening. This information is usually found in the component's manual or on the component itself.
2. ව්‍යවර්ථ අගය සකසන්න: The M-Wave TW-3/10 has a fixed torque range of 3-10 Nm. The wrench is designed to click or give a tactile indication when the set torque is reached. The scale on the wrench indicates the approximate torque setting. Ensure you are within the 3-10 Nm range.
3. යතුර ස්ථානගත කරන්න: Place the bit firmly into the head of the fastener. Ensure the wrench is perpendicular to the fastener to avoid stripping.
4. බලය යොදන්න: Apply slow, steady, and increasing force to the handle of the torque wrench. Do not use sudden jerks or excessive force.
5. Listen for the Click: Continue applying force until you feel and/or hear a distinct "click" or break in the wrench's movement. This indicates that the preset torque value has been reached.
6. Stop Immediately: Once the click is felt/heard, stop applying force immediately. Do not continue to tighten the fastener beyond this point, as over-tightening can damage components or the wrench itself.
7. Remove the Wrench: Carefully remove the torque wrench from the fastener.

Image: A hand demonstrating the use of the M-Wave torque wrench to tighten a bolt on a bicycle stem, illustrating proper application.

වැදගත් ආරක්ෂක සටහන්:

• Always use the correct bit size for the fastener.
• Never use the torque wrench as a breaker bar or for loosening fasteners.
• Do not exceed the maximum torque rating of 10 Nm.
• Keep the wrench clean and free from dirt or debris.

නඩත්තු කිරීම

Proper maintenance will extend the life and accuracy of your M-Wave TW-3/10 Torque Wrench.

• පිරිසිදු කිරීම: After each use, wipe down the wrench with a clean, dry cloth to remove any dirt, grease, or moisture. Do not use harsh chemicals or abrasive cleaners.
• ගබඩා: Store the torque wrench in a clean, dry place, away from extreme temperatures and humidity. It is recommended to store it in its original packaging or a protective case to prevent damage.
• බිට් සත්කාරය: Keep the bits clean and organized. If any bits show signs of wear or damage (e.g., rounded edges), replace them to prevent fastener damage.
• ක්රමාංකනය: Torque wrenches are precision instruments and may require periodic calibration to maintain accuracy. Consult M-Wave's official support channels for information on recommended calibration intervals and services.

දෝෂගවේෂණය

If you encounter issues with your M-Wave TW-3/10 Torque Wrench, consider the following common problems and solutions:

For issues not covered here, please contact M-Wave customer support.

පිරිවිතර

Key specifications for the M-Wave TW-3/10 Torque Wrench:

වගකීම් සහ සහාය

For warranty information, product support, or to inquire about service and calibration, please refer to the official M-Wave webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුවට කෙලින්ම සම්බන්ධ වන්න. ඕනෑම වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

You can visit the M-Wave store for more information: M-Wave Official Store