Ceenwes Dog Clippers Low Noise Pet Clippers Rechargeable Trimmer Cordless Grooming Tool

හැඳින්වීම

Welcome to the Ceenwes Pet Clipper user manual. This guide provides comprehensive instructions for the safe and effective use, maintenance, and troubleshooting of your new pet grooming tool. Designed for both professional and home use, these clippers offer a quiet and efficient grooming experience for your beloved pets.

පැකේජයේ අන්තර්ගතය

Your Ceenwes Pet Clipper kit includes the following items:

• 1 × Pet Clipper (with included Battery)
• 1 × AC බල ඇඩැප්ටරය
• 1 × පිරිසිදු කිරීමේ බුරුසුව
• 4 × Comb Attachments (3-6-9-12mm)
• 1 × Stainless Steel Scissor
• 1 × Stainless Steel Comb
• 1 × Nail Clipper
• 1 × නිය File
• 1 × පරිශීලක අත්පොත

Figure 1: Complete Ceenwes Pet Clipper Kit Contents.

The Ceenwes Pet Clipper kit comes complete with all necessary tools for comprehensive pet grooming. This includes the main pet clipper unit, an AC power adapter for charging, a small cleaning brush for maintenance, four comb attachments (3mm, 6mm, 9mm, 12mm) for varying hair lengths, a stainless steel scissor, a stainless steel comb, a nail clipper, a nail file, and a user manual.

නිෂ්පාදන විශේෂාංග

• සුපිරි නිහඬ මෙහෙයුම

  The Ceenwes pet clippers feature a precision motor with low vibration and an ultra-quiet design, operating at only about 60 dB. This significantly reduces grooming stress for pets, making haircuts a more comfortable experience. The powerful motor ensures efficient clipping without snagging or hurting pet hair.

  

  Figure 2: Low Noise and Low Vibration Design.

  The Ceenwes pet clippers are engineered with a precision motor for low vibration and ultra-quiet operation, producing only about 60 dB of noise. This design helps to keep pets calm and comfortable during grooming sessions, reducing anxiety often associated with noisy clippers.

• Cordless & Rechargeable Design

  Enjoy the freedom of cordless grooming with a lightweight design for easy handling. The pet grooming kit includes a charger, allowing for 70-80 minutes of continuous use after a 50-minute charge. The clippers can also be used while corded, providing flexibility.

  

  Figure 3: Cordless Operation for Convenience.

  The lightweight and cordless design of the Ceenwes pet clippers allows for easy maneuverability and use anywhere. Equipped with a rechargeable battery, a 50-minute charge provides 70-80 minutes of continuous use, offering freedom from tangled cords or the need for constant battery replacement.

• Sharp & Adjustable Blade

  Equipped with a titanium acute-angle blade combined with a ceramic movable blade, these clippers ensure smooth and efficient cutting. The fine-tuning knob provides five levels of length adjustment (0.8-2mm), and four attachment guide combs (3mm/6mm/9mm/12mm) offer precise and skin-friendly grooming options.

  

  Figure 4: Adjustable Blade and Comb Guides.

  Featuring a fine-tuning knob, the clipper offers five levels of blade adjustment from 0.8mm to 2.0mm for precise hair length control. Additionally, four attachment guide combs (3mm, 6mm, 9mm, 12mm) are included, providing versatile options for different grooming styles and ensuring a skin-friendly, comfortable experience.

සැකසුම් මාර්ගෝපදේශය

1. මූලික ගාස්තුව: Before first use, fully charge the clipper for approximately 4-5 hours. The indicator light will show charging status.
2. පනාව සවි කිරීමේ මාර්ගෝපදේශය: Select the desired comb attachment (3mm, 6mm, 9mm, or 12mm) based on the desired hair length. Align the comb with the clipper blade and snap it firmly into place.
3. බ්ලේඩ් දිග සකසන්න: For finer adjustments, rotate the fine-tuning knob on the clipper body to select a blade length between 0.8mm and 2.0mm.
4. බල ගැන්වීම: Slide the power switch to the "ON" position to start the clipper.

මෙහෙයුම් උපදෙස්

Pre-Grooming Preparation

1. Bathe and Dry Pet: Ensure your pet's coat is clean and completely dry before grooming. This prevents clogging of the blades and ensures a smooth cut.
2. Comb Hair: Use the provided stainless steel comb to remove any tangles or mats from your pet's fur. This prepares the coat for even clipping.
3. Trim Knots: For stubborn knots, use the stainless steel scissors to carefully trim them out before using the clippers.

Grooming Technique

1. සෙමින් ආරම්භ කරන්න: Begin grooming in an area where your pet is comfortable. Allow your pet to get accustomed to the sound and vibration of the clippers.
2. Clip in Direction of Hair Growth: Always move the clippers in the direction of hair growth for a smooth and even cut.
3. Maintain Blade Temperature: Periodically check the blade temperature. If it becomes too warm, turn off the clipper and allow it to cool down to prevent discomfort to your pet.
4. Use Comb Guides: Utilize the comb attachments for consistent hair length. For areas requiring shorter cuts, adjust the blade length directly.

Figure 5: Step-by-Step Pet Grooming Process.

For optimal grooming results, follow these steps: 1. Bathe your pet and ensure their hair is clean and dry. 2. Use the stainless steel comb to detangle and tidy the fur. 3. Trim any knotted hair with the provided scissors. 4. Proceed with shaving using the Ceenwes grooming clipper, moving smoothly along the pet's coat.

නඩත්තු කිරීම

තලය පිරිසිදු කිරීම

1. හිසකෙස් ඉවත් කරන්න: After each use, turn off the clipper and use the cleaning brush to remove any trapped hair from the blades.
2. Disassemble Blade: To thoroughly clean, adjust the blade gear to 2.0, then gently push the blade down to detach it from the clipper body.
3. හොඳින් පිරිසිදු කරන්න: Use the cleaning brush to remove all hair and debris from both the detached blade and the clipper head.
4. Reassemble Blade: Align the blade with the slot on the clipper body and push it in the direction of the arrow until it clicks securely into place.

තලයට තෙල් දැමීම

Regular oiling ensures optimal performance and extends the life of your blades.

1. තෙල් යොදන්න: With the blade attached and the clipper turned off, apply 1-2 drops of the provided lubricating oil to the top of the blades.
2. Run Clipper: තෙල් තල හරහා ඒකාකාරව බෙදා හැරීමට තත්පර කිහිපයක් සඳහා කපනය ක්‍රියාත්මක කරන්න.
3. අතිරික්තය පිස දමන්න: අතිරික්ත තෙල් මෘදු රෙද්දකින් පිස දමන්න.

Figure 6: Blade Disassembly and Assembly for Cleaning.

To maintain your clippers, regularly clean the blade. To disassemble, adjust the gear to 2.0, then push the blade down. It is easy to remove. To assemble, align the blade with the slot, push it in the direction of the arrow until it clicks, and then attach the guide comb.

දෝෂගවේෂණය

පිරිවිතර

වගකීම් සහ සහාය

This product is manufactured by Ceenwes. For any inquiries regarding warranty, product support, or technical assistance, please refer to the contact information provided in the original product packaging or visit the official Ceenwes webඅඩවිය.

While specific warranty details are not provided in this manual, it is recommended to retain your proof of purchase for any potential warranty claims.