1. හැඳින්වීම
The Renkforce BTHP-100 is a versatile Bluetooth device designed to function as both a transmitter and a receiver. This unit allows you to wirelessly stream audio from non-Bluetooth devices to Bluetooth-enabled headphones or speakers (Transmitter mode), or to receive audio from Bluetooth sources like smartphones and tablets to non-Bluetooth audio systems (Receiver mode). It supports Bluetooth Version 4.2 with aptX and SBC codecs, offering a range of up to 100 meters in optimal conditions.
Figure 1: Renkforce BTHP-100 Bluetooth Transmitter/Receiver, angled view.
2. පැකේජ අන්තර්ගතය
Please check the package contents upon unpacking to ensure all items are present and undamaged. If any items are missing or damaged, please contact your retailer.
- Renkforce BTHP-100 Bluetooth Transmitter/Receiver
- USB බල කේබලය
- 3.5mm ශ්රව්ය කේබල්
- RCA ශ්රව්ය කේබලය
- පරිශීලක අත්පොත (මෙම ලේඛනය)
Figure 2: Renkforce BTHP-100 unit with its included USB power cable, 3.5mm audio cable, and RCA audio cable.
3 උපාංග පිරිසැලසුම
Familiarize yourself with the various ports and indicators on the BTHP-100 unit.
රූපය 3: පසුපස view of the Renkforce BTHP-100, highlighting the RX Output (AUX, Optical), TX Input (Optical, AUX), and DC IN power port.
Front Panel Indicators and Controls:
- RX/TX Switch: Toggles between Receiver and Transmitter modes.
- OPT/AUX Indicator: Shows the currently selected audio input/output type (Optical or Auxiliary).
- SBC/aptX/LL Indicator: Displays the active Bluetooth audio codec (SBC, aptX, or aptX Low Latency).
- යුගල බොත්තම: බ්ලූටූත් යුගල කිරීමේ ප්රකාරය ආරම්භ කරයි.
- ශබ්ද බොත්තම් (+/-): ශ්රව්ය පරිමාව සීරුමාරු කරයි.
4. පිහිටුවීම
4.1 බල සම්බන්ධතාවය
- Connect the supplied USB power cable to the DC IN port on the BTHP-100.
- Plug the other end of the USB cable into a USB power adapter (not included) or a powered USB port (e.g., on a computer or TV).
- උපාංගය ස්වයංක්රීයව ක්රියාත්මක වේ.
4.2 Mode Selection (Transmitter/Receiver)
Use the RX/TX switch on the unit to select the desired operating mode:
- TX (සම්ප්රේෂක) මාදිලිය: To send audio from a non-Bluetooth device (e.g., TV, stereo) to Bluetooth headphones or speakers.
- RX (ග්රාහක) මාදිලිය: To receive audio from a Bluetooth device (e.g., smartphone, tablet) and output it to a non-Bluetooth audio system (e.g., wired speakers, ampජීවිත කාලය).
Figure 4: Diagram showing the dual functionality of the Renkforce BTHP-100 as both a Bluetooth transmitter and receiver.
5. මෙහෙයුම් උපදෙස්
5.1 සම්ප්රේෂක (TX) මාදිලිය
In TX mode, the BTHP-100 sends audio from a connected source to Bluetooth headphones or speakers.
- Set the RX/TX switch to TX.
- ශ්රව්ය මූලාශ්රය සම්බන්ධ කරන්න:
- සඳහා ඔප්ටිකල් ඕඩියෝ: Connect an optical cable from your audio source's optical output to the BTHP-100's TX Input (Optical).
- සඳහා Auxiliary Audio: Connect a 3.5mm audio cable from your audio source's headphone jack or audio output to the BTHP-100's TX Input (AUX).
- යුගල කිරීම:
- Put your Bluetooth headphones/speakers into pairing mode.
- Press the Pairing button on the BTHP-100. The Bluetooth indicator will flash, indicating it is searching for devices.
- Once connected, the Bluetooth indicator will remain solid, and the codec indicator (SBC/aptX/LL) will light up.
- ශ්රව්ය නැවත ධාවනය: Start playing audio on your source device. The sound will be transmitted to your paired Bluetooth device.
රූපය 5: උදාample of the Renkforce BTHP-100 in Transmitter mode, sending TV audio to Bluetooth headphones via an optical cable.
5.2 ග්රාහක (RX) මාදිලිය
In RX mode, the BTHP-100 receives audio from a Bluetooth source and outputs it to a connected audio system.
- Set the RX/TX switch to RX.
- ශ්රව්ය ප්රතිදානය සම්බන්ධ කරන්න:
- සඳහා ඔප්ටිකල් ඕඩියෝ: Connect an optical cable from the BTHP-100's RX Output (Optical) to your audio system's optical input.
- සඳහා Auxiliary Audio: Connect a 3.5mm audio cable (or RCA adapter) from the BTHP-100's RX Output (AUX) to your audio system's auxiliary input.
- යුගල කිරීම:
- On your Bluetooth source device (e.g., smartphone), enable Bluetooth and search for new devices.
- Select "Renkforce BTHP-100" from the list of available devices.
- Once connected, the Bluetooth indicator on the BTHP-100 will remain solid, and the codec indicator will light up.
- ශ්රව්ය නැවත ධාවනය: Start playing audio on your Bluetooth source device. The sound will be output through your connected audio system.
5.3 වෙළුම් පාලනය
භාවිතා කරන්න + සහ - buttons on the BTHP-100 to adjust the output volume. Note that volume control may also be available on your connected source or receiving device.
6. නඩත්තු කිරීම
To ensure the longevity and optimal performance of your Renkforce BTHP-100, follow these maintenance guidelines:
- පිරිසිදු කිරීම: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or abrasive materials, as they may damage the surface or internal components.
- ගබඩා: දිගු කාලයක් භාවිතයේ නොමැති විට, උපාංගය සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව සිසිල් වියළි ස්ථානයක ගබඩා කරන්න.
- හැසිරවීම: උපාංගය අතහැර දැමීමෙන් හෝ එය දැඩි බලපෑම්වලට ලක් කිරීමෙන් වළකින්න.
- පරිසරය: Keep the device away from water, moisture, and excessive dust.
7. දෝශ නිරාකරණය
If you encounter issues with your Renkforce BTHP-100, refer to the following common problems and solutions:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| බලය නැත | Power cable not connected properly; faulty USB power source. | Ensure USB cable is securely connected. Try a different USB port or power adapter. |
| උපාංගය යුගල කළ නොහැක | Device not in pairing mode; too far from BTHP-100; interference. | Ensure both devices are in pairing mode. Move devices closer. Reduce interference from other wireless devices. |
| No sound (TX mode) | Incorrect audio input selected; volume too low; source device not playing audio. | Verify the correct audio input (Optical/AUX) is selected. Increase volume on BTHP-100 and receiving device. Ensure source device is playing audio. |
| No sound (RX mode) | Incorrect audio output selected; volume too low; receiving device not selected as input. | Verify the correct audio output (Optical/AUX) is selected. Increase volume on BTHP-100 and connected audio system. Ensure your audio system is set to the correct input. |
| Poor audio quality or dropouts | Distance too great; obstacles; interference; low battery on paired device. | Move devices closer. Remove obstacles. Check battery level of paired Bluetooth device. |
8. පිරිවිතර
- ආකෘතිය: BTHP-100
- නිෂ්පාදන අංකය: 1628712
- බ්ලූටූත් අනුවාදය: 4.2
- සහාය දක්වන කෝඩෙක්ස්: aptX, SBC
- මෙහෙයුම් පරාසය: මීටර් 100 දක්වා (විවෘත ප්රදේශවල)
- Audio Inputs (TX Mode): Optical, 3.5mm AUX
- Audio Outputs (RX Mode): Optical, 3.5mm AUX
- බල ආදානය: USB හරහා DC 5V
- මානයන් (L x W x H): ආසන්න වශයෙන් 11.42 x 9.15 x 1.93 සෙ.මී
- බර: ග්රෑම් 75 ක් පමණ
- වර්ණය: කළු
9. වගකීම් සහ සහාය
Renkforce products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.
For technical support or further assistance, please contact your point of purchase or visit the official Renkforce webආධාරක සම්පත් සඳහා අඩවිය.
