පැකේජයේ අන්තර්ගතය
පහත ලැයිස්තුගත කර ඇති සියලුම අයිතම ඔබේ පැකේජයේ ඇති බව තහවුරු කරගන්න:
- DSC PC1404 Control Panel Board
- DSC PC1404 Keypad
- Metal Enclosure Box
සැකසුම සහ ස්ථාපනය
1. Mounting the Metal Enclosure Box
Select a secure, dry location for mounting the metal enclosure box. Ensure it is easily accessible for wiring but out of reach of unauthorized personnel.
Image: The open metal enclosure box, showing pre-drilled mounting holes and internal layout for component installation.
- Mark the desired mounting points on the wall using the enclosure's pre-drilled holes as a template.
- Drill pilot holes if necessary and secure the enclosure to the wall using appropriate fasteners.
2. Installing the Control Panel Board
Carefully install the PC1404 control panel board inside the metal enclosure. Ensure it is securely fastened to prevent movement.
Image: The green circuit board of the DSC PC1404 control panel, showing various electronic components and terminal blocks.
- Align the control panel board with the standoffs inside the enclosure.
- Secure the board using the provided screws or clips.
3. Connecting the Keypad
Connect the PC1404 keypad to the control panel using the appropriate wiring. Refer to the wiring diagram for correct terminal connections.
Image: The white DSC PC1404 keypad with numerical buttons and function keys, used for arming and disarming the alarm system.
- Connect the keypad's red, black, yellow, and green wires to the corresponding terminals on the control panel.
- සියලුම සම්බන්ධතා ආරක්ෂිත සහ නිසි ලෙස පරිවරණය කර ඇති බවට සහතික වන්න.
4. බල සම්බන්ධතාවය
Connect the system to a reliable power source. The PC1404 operates on corded electric power.
- Connect the AC transformer to the control panel's AC terminals.
- Connect the backup battery (if applicable) to the battery terminals.
- Plug the AC transformer into a non-switched electrical outlet.
මෙහෙයුම් උපදෙස්
පද්ධතිය සන්නද්ධ කිරීම
To arm the system, ensure all zones are closed (no open doors/windows). Enter your 4-digit user code on the keypad.
- සන්නද්ධව සිටින්න: ඔබන්න [ඉන්න] then your user code. This arms the perimeter zones, allowing movement within the protected area.
- ඈත සන්නද්ධ: ඔබන්න [Away] then your user code. This arms all zones, including interior motion detectors.
පද්ධතිය නිරායුධ කිරීම
To disarm the system, enter your 4-digit user code. This will silence any active alarms and disarm all zones.
කලාප මඟ හැරීම
If a zone needs to be temporarily disarmed while the rest of the system is armed, you can bypass it.
- ඔබන්න [*] පසුව [1].
- Enter the 2-digit zone number(s) to bypass.
- ඔබන්න 🇧🇷 පිටවීමට.
නඩත්තු කිරීම
Regular maintenance ensures the optimal performance and longevity of your DSC alarm system.
- බැටරි පරීක්ෂාව: Test the backup battery annually. Replace if it fails to hold a charge.
- පද්ධති පරීක්ෂණය: Perform a full system test monthly, including all sensors and the siren, to ensure proper functionality.
- පිරිසිදු කිරීම: Gently wipe the keypad and control panel enclosure with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- රැහැන් පරීක්ෂාව: Periodically inspect all wiring for signs of wear, damage, or loose connections.
වගකීම් සහ සහාය
For specific warranty information, please refer to the documentation provided at the time of purchase or contact your authorized DSC dealer. For technical assistance or questions regarding system configuration, please reach out to your installer or the product support team.
Note: Manuals may be sent via email for smaller postage charges. For any questions about support or building an alarm system, feel free to ask.
