1. හැඳින්වීම
The V-TAC VT-2414 LED Sync Dimmer is designed to control the brightness of compatible V-TAC LED strip lights. This device features a single output channel and is operated via an RF (Radio Frequency) remote control, offering convenient adjustment of your LED lighting. It supports both 12V and 24V DC input voltages and provides a maximum output of 300W with a 25A current.
2 ආරක්ෂිත තොරතුරු
- විදුලි කම්පනය වැළැක්වීම සඳහා ස්ථාපනය කිරීමට හෝ නඩත්තු කිරීමට පෙර බල සැපයුම විසන්ධි කර ඇති බවට සහතික වන්න.
- This device is designed for indoor use only. Avoid exposure to moisture, high temperatures, or corrosive environments.
- Do not exceed the maximum load capacity of 300W or 25A. Overloading can damage the device and connected LED strips.
- Ensure proper wiring connections according to the diagrams provided. Incorrect wiring can cause malfunction or damage.
- උපකරණය දරුවන්ගෙන් ඈත් කරන්න.
3. පැකේජ අන්තර්ගතය
සියලුම සංරචක පැකේජයේ ඇති බව තහවුරු කර ගන්න:
- 1 x V-TAC VT-2414 LED Sync Dimmer Unit
- 1 x RF දුරස්ථ පාලකය
Image: The product box for the V-TAC VT-2414 LED Sync Dimmer, illustrating the dimmer unit and its accompanying RF remote control.
4. නිෂ්පාදන අවසන්view
The VT-2414 dimmer unit is a compact device designed for easy integration into your LED lighting system. It features clearly labeled input and output terminals for power and LED strip connections. The RF remote control allows for wireless operation of the dimmer.
Image: The V-TAC VT-2414 LED Sync Dimmer unit, showcasing its compact design and clearly marked power input and LED output terminals.
5. පිහිටුවීම සහ ස්ථාපනය
Follow these steps for proper installation of your LED Sync Dimmer:
- විදුලිය විසන්ධි කිරීම: Before making any connections, ensure that the power supply to your LED lighting system is completely disconnected.
- බල ආදානය සම්බන්ධ කරන්න: Connect the DC 12V-24V power supply to the 'POWER' input terminals on the dimmer unit. Ensure correct polarity: '+' to '+' and '-' to '-'.
- Connect LED Output: Connect your compatible V-TAC LED strip lights to the 'LED' output terminals. Again, observe correct polarity: '+' to '+' and '-' to '-'. The dimmer has one output channel.
- ආරක්ෂිත සම්බන්ධතා: සියලුම වයර් සම්බන්ධතා ආරක්ෂිතව සහ නිසි ලෙස පරිවරණය කර ඇති බවට සහතික වන්න.
- සවි කිරීම: The dimmer unit can be surface-mounted using appropriate screws (not included) through the mounting tabs.
- බල ගැන්වීම: Once all connections are secure and verified, restore power to the system.
Image: A visual representation of the VT-2414 dimmer unit, highlighting its input (POWER) and output (LED) terminals for wiring, shown next to the RF remote control.
6. මෙහෙයුම් උපදෙස්
Use the RF remote control to operate the LED Sync Dimmer:
- බල බොත්තම (O): Press to turn the LED lights ON or OFF.
- Brightness Up/Down (I / -): Use the 'I' button to increase brightness and the '-' button to decrease brightness.
- දිශානුගත ඊතල: The central directional arrows (up, down, left, right) may offer fine-tuning of brightness or access to preset modes, depending on the specific remote functionality.
- SET බොත්තම: This button is typically used for pairing the remote with the dimmer or saving custom settings. Refer to specific remote instructions if provided with the remote.
Image: A hand operating the RF remote control, illustrating how it can be used to control LED strip lighting, such as under kitchen cabinets.
7. නඩත්තු කිරීම
- පිරිසිදු කිරීම: Clean the dimmer unit and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- පරිසරය: Ensure the dimmer is kept in a dry environment, free from dust and extreme temperatures.
- සම්බන්ධතා: Periodically check all wiring connections to ensure they remain secure.
8. දෝශ නිරාකරණය
- LEDs not turning ON:
- බල සැපයුම සම්බන්ධ වී සක්රිය දැයි පරීක්ෂා කරන්න.
- Verify all wiring connections (input and output) for correct polarity and secure contact.
- Ensure the remote control has working batteries and is within range.
- Confirm the LED strip lights are functional.
- Dimmer not responding to remote:
- දුරස්ථ පාලක බැටරි ප්රතිස්ථාපනය කරන්න.
- Ensure there are no obstructions between the remote and the dimmer unit.
- Re-pair the remote control with the dimmer if applicable (refer to remote's specific instructions).
- LEDs flickering or inconsistent brightness:
- Check if the total wattage of the connected LED strips exceeds the dimmer's maximum capacity (300W).
- Verify stable power supply voltage.
- ලිහිල් සම්බන්ධතා හෝ හානි සඳහා රැහැන් පරීක්ෂා කරන්න.
9. පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| ආදර්ශ අංකය | VT-2414 |
| ආදාන වෙළුමtage | DC 12V-24V |
| ප්රතිදාන නාලිකාව | 1 නාලිකාව |
| උපරිම ප්රතිදාන බලය | 300W |
| උපරිම ප්රතිදාන ධාරාව | 25A |
| පාලන ක්රමය | RF දුරස්ථ පාලකය |
| මෙහෙයුම් ආකාරය | සක්රියයි |
| ද්රව්ය | ඇලුමිනියම් |
| නිෂ්පාදන මානයන් | 3.2 x 119.5 x 4.1 සෙ.මී. (දළ වශයෙන්) |
| බර | 1 kg (ආසන්න වශයෙන්) |
| IP ශ්රේණිගත කිරීම | IP20 (ගෘහස්ථ භාවිතය) |
10. වගකීම් තොරතුරු
This V-TAC VT-2414 LED Sync Dimmer comes with a වසර 2ක වගකීමක් from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
11. සහාය
If you encounter any issues or have questions regarding the installation or operation of your V-TAC VT-2414 LED Sync Dimmer that are not covered in this manual, please contact your retailer or V-TAC customer support for assistance. Please have your product model number and purchase details ready when contacting support.
