1. හැඳින්වීම
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your ESBE VTA 323 KF 22 Mm Thermostatic Mixing Valve. Please read these instructions carefully before installation and retain them for future reference.
2 ආරක්ෂිත තොරතුරු
වැදගත් ආරක්ෂක උපදෙස්:
- දේශීය රෙගුලාසි සහ ප්රමිතීන්ට අනුකූලව සුදුසුකම් ලත් වෘත්තිකයෙකු විසින් ස්ථාපනය සිදු කළ යුතුය.
- Ensure the main water supply is turned off before commencing any installation or maintenance work.
- Do not modify the valve or its components. Use only genuine ESBE spare parts.
- Protect the valve from freezing temperatures.
- ස්ථාපනය සහ නඩත්තු කිරීමේදී සෑම විටම සුදුසු පුද්ගලික ආරක්ෂක උපකරණ (PPE) පැළඳ ගන්න.
3. නිෂ්පාදන අවසන්view
The ESBE VTA 323 KF 22 Mm is a thermostatic mixing valve designed for domestic hot water applications. It ensures a constant and safe mixed water temperature at the outlet, protecting against scalding and optimizing energy consumption.
රූපය 1: ESBE VTA 323 KF 22 Mm Thermostatic Mixing Valve. This image displays the brass body of the valve with a dark grey plastic top housing. The ESBE logo is visible on the front, along with red and blue arrows indicating hot and cold water inlets and a mixed water outlet.
3.1 ප්රධාන සංරචක
- කපාට ශරීරය: Brass construction for durability.
- Thermostatic Element: Automatically adjusts the mixing ratio of hot and cold water.
- ඇතුල්වීම්: Clearly marked for hot (red) and cold (blue) water.
- අලෙවිසැල: For mixed water supply.
- Adjustment Knob/Cap: For setting the desired mixed water temperature (under the dark grey cap).
4. පිහිටුවීම සහ ස්ථාපනය
Follow these steps for proper installation of the ESBE VTA 323 KF 22 Mm valve:
- සකස් කිරීම: Turn off the main water supply. Drain the system to relieve pressure.
- ස්ථානගත කිරීම: Install the valve in an easily accessible location for future maintenance. Ensure the flow direction arrows on the valve body match the system's water flow. The hot water inlet is typically marked with red, and the cold water inlet with blue.
- සම්බන්ධතා: Connect the hot water supply to the designated hot inlet, and the cold water supply to the cold inlet. Connect the mixed water outlet to the distribution system. Use appropriate sealing materials (e.g., PTFE tape or hemp) on threaded connections to prevent leaks. The 22 mm connections are designed for standard plumbing.
- කාන්දු පරීක්ෂාව: Once all connections are secure, slowly open the main water supply and check for any leaks. Tighten connections as necessary.
- Initial Temperature Setting: Refer to the "Operating Instructions" section to set the desired mixed water temperature.
5. මෙහෙයුම් උපදෙස්
The ESBE VTA 323 KF 22 Mm valve is largely automatic once the desired temperature is set. The primary operation involves setting and, if necessary, adjusting the mixed water temperature.
- Accessing Adjustment: The temperature adjustment mechanism is typically located under the dark grey protective cap on top of the valve. Carefully remove this cap.
- උෂ්ණත්වය සැකසීම: Rotate the adjustment knob (or screw) to increase or decrease the mixed water temperature. Turn towards the 'hot' indicator (often red) to increase temperature, and towards the 'cold' indicator (often blue) to decrease it.
- සත්යාපනය: Use a thermometer to verify the mixed water temperature at a tap downstream from the valve. Adjust as needed until the desired safe temperature (e.g., 38-45°C for domestic use) is achieved.
- Securing Setting: Once the desired temperature is set, replace the protective cap.
6. නඩත්තු කිරීම
Regular maintenance ensures the longevity and optimal performance of your ESBE VTA 323 KF 22 Mm valve.
- වාර්ෂික පරීක්ෂණය: කාන්දුවීම්, විඛාදන හෝ හානි පිළිබඳ කිසියම් සලකුණක් සඳහා වාර්ෂිකව කපාටය පරීක්ෂා කරන්න.
- උෂ්ණත්ව පරීක්ෂාව: Periodically verify the mixed water temperature with a thermometer to ensure it remains at the desired setting. Recalibrate if necessary.
- පිරිසිදු කිරීම: In areas with hard water, mineral deposits may accumulate. If the valve's performance degrades (e.g., inconsistent temperature), it may require cleaning. This typically involves disassembling the valve, cleaning the internal components (especially the thermostatic element) with a suitable descaling solution, and reassembling it. This procedure should ideally be performed by a qualified technician.
- අමතර කොටස්: If any components need replacement, use only genuine ESBE spare parts.
7. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| මිශ්ර ජල උෂ්ණත්වය නොගැලපේ | Fluctuating inlet pressures; clogged thermostatic element; sediment buildup. | Check system pressures. Clean or descale the thermostatic element. Inspect for sediment. |
| No hot water or only cold water | Hot water supply failure; valve stuck in cold position; severe blockage. | Verify hot water supply. Inspect and clean the valve internals. |
| No cold water or only hot water | Cold water supply failure; valve stuck in hot position; severe blockage. | Verify cold water supply. Inspect and clean the valve internals. |
| Water leakage from valve | Loose connections; damaged seals/gaskets; cracked valve body. | Tighten connections. Replace seals/gaskets. If valve body is cracked, replace the entire valve. |
If you are unable to resolve an issue, contact a qualified plumber or ESBE customer support.
8. පිරිවිතර
- නිෂ්පාදකයා: ESBE
- ආකෘතිය: VTA 323 KF 22 Mm
- අයිතමයේ බර: කිලෝ ග්රෑම් 1 කි
- ASIN: B07L25C8HD
- මුලින්ම ලබා ගත හැකි දිනය: 15 ජනවාරි 2020
- සම්බන්ධතා ප්රමාණය: 22 mm (KF refers to compression fittings)
- Note: Specific temperature range and flow rates are typically detailed in the product's technical data sheet.
9. වගකීම් සහ සහාය
For warranty information, please refer to the documentation provided with your purchase or visit the official ESBE website. For technical support or inquiries regarding spare parts, please contact your local ESBE distributor or customer service department.
ESBE Contact Information: කරුණාකර පිවිසෙන්න www.esbe.eu කලාපීය සම්බන්ධතා විස්තර සඳහා.
