1. නිෂ්පාදන අවසන්view
The AMD Wraith Stealth CPU Cooler is designed to provide efficient cooling for AMD AM4 socket processors. It features an aluminum heatsink with a pre-applied thermal paste and a 3.5-inch (90mm) fan. This cooler is a reliable solution for maintaining optimal CPU temperatures, ensuring stable system performance.
- Supports Motherboard Socket: AM4
- Aluminum heatsink with pre-applied thermal paste
- Direct screw mounting to socket AM4 motherboard
- 3.5-inch 90mm fan
- 4-pin PWM power connector (approximately 9-inch length)
Figure 1: AMD Wraith Stealth CPU Cooler. This image shows the top-down view of the cooler, highlighting the fan blades and the AMD logo on the fan hub and shroud. The heatsink fins are visible beneath the fan.
2. පිහිටුවීම සහ ස්ථාපනය
ප්රශස්ත සිසිලන ක්රියාකාරිත්වය සඳහා නිසි ස්ථාපනය ඉතා වැදගත් වේ. මෙම පියවර ප්රවේශමෙන් අනුගමනය කරන්න:
- මවු පුවරුව සකස් කරන්න: Ensure your motherboard has the AM4 socket and the original CPU retention module (backplate) is in place. The cooler utilizes this existing backplate for secure mounting.
- සිසිලකය ස්ථානගත කරන්න: Align the four spring-loaded screws on the cooler's base with the corresponding holes on the motherboard's backplate. The cooler comes with pre-applied thermal paste on its base, so no additional thermal compound is needed.
- සිසිලකය සුරක්ෂිත කරන්න: Gently press down on the cooler to engage the screws with the backplate. Use a Phillips head screwdriver to tighten the screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until they are snug. Do not overtighten. This ensures even pressure distribution and proper contact with the CPU.
- සම්බන්ධක බලය: Locate the 4-pin PWM fan header on your motherboard (often labeled "CPU_FAN"). Connect the cooler's 4-pin power cable to this header. This allows the motherboard to control the fan speed based on CPU temperature.
Note: The installation process involves handling delicate computer components. If you are unsure, consult a qualified technician.
3. මෙහෙයුම් උපදෙස්
Once installed, the AMD Wraith Stealth CPU Cooler operates automatically. The 4-pin PWM (Pulse Width Modulation) connector allows your motherboard to dynamically adjust the fan speed based on the CPU's temperature. This ensures efficient cooling when needed and quieter operation during lighter loads.
- Automatic Fan Control: The fan speed will increase as the CPU temperature rises and decrease when the CPU cools down.
- BIOS/UEFI සැකසුම්: You can typically monitor CPU temperatures and fan speeds through your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer. Advanced users may adjust fan curves in these settings, though the default automatic control is usually sufficient.
4. නඩත්තු කිරීම
නිතිපතා නඩත්තු කිරීම ඔබේ CPU සිසිලකයේ ආයු කාලය සහ ප්රශස්ත ක්රියාකාරිත්වය සහතික කිරීමට උපකාරී වේ.
- දූවිලි ඉවත් කිරීම: Periodically inspect the heatsink fins and fan blades for dust accumulation. Dust can impede airflow and reduce cooling efficiency. Use compressed air to gently blow dust away from the heatsink and fan. Hold the fan blades in place while using compressed air to prevent over-spinning and potential damage to the fan bearings.
- තාප පේස්ට්: The cooler comes with pre-applied thermal paste. If you ever remove the cooler, it is recommended to clean off the old thermal paste from both the CPU and the cooler's base and apply a fresh layer of high-quality thermal paste before reinstallation.
5. දෝශ නිරාකරණය
If you encounter issues with your CPU cooler, consider the following common problems and solutions:
- ඉහළ CPU උෂ්ණත්වයන්:
- Check if the cooler is securely mounted and making proper contact with the CPU. Ensure all four screws are tightened evenly.
- Verify that the fan is spinning. If not, check the 4-pin power connection to the motherboard.
- Clean any dust accumulation from the heatsink and fan.
- ඔබේ පරිගණක ආවරණය තුළ ප්රමාණවත් වායු ප්රවාහයක් සහතික කර ගන්න.
- Fan Not Spinning or Erratic Speed:
- Confirm the 4-pin power cable is correctly plugged into the "CPU_FAN" header on the motherboard.
- Check BIOS/UEFI settings for fan control options. Ensure PWM control is enabled if available.
- අධික විදුලි පංකා ශබ්දය:
- Dust accumulation can cause noise; clean the fan and heatsink.
- Ensure no cables are obstructing the fan blades.
- If the noise is a grinding or rattling sound, the fan bearing might be failing, and replacement may be necessary.
6. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | AMD |
| ආදර්ශ අංකය | 712-000052 |
| අනුකූල සොකට් | AM4 |
| සිසිලන ක්රමය | වායු සිසිලනය |
| Heatsink Material | Aluminum, Copper (base) |
| විදුලි පංකා ප්රමාණය | අඟල් 3.5 (මි.මී. 90) |
| බල සම්බන්ධකය | 4-Pin PWM |
| වෙළුමtage | වෝල්ට් 12 |
| වට්tage | වොට් 2 යි |
| උපරිම භ්රමණ වේගය | 2000 RPM |
| නිෂ්පාදන මානයන් | අඟල් 1.97 x 4.72 x 4.72 |
| අයිතමයේ බර | අවුන්ස 4 කි |
| UPC | 641799734686 |
7. වගකීම් සහ සහාය
For warranty information and technical support regarding your AMD Wraith Stealth CPU Cooler, please refer to the official AMD website or contact AMD customer service directly. Keep your proof of purchase for warranty claims.
නිල AMD සහාය: www.amd.com/en/support
