වැදගත් ආරක්ෂක උපදෙස්
Read all instructions before installing or using this heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or death.
- විදුලි සම්බන්ධතාවය: This heater operates on 240 Volts. All wiring must be performed by a qualified electrician and comply with national and local electrical codes.
- භූගත කිරීම: මෙම තාපකය පදනම් විය යුතුය.
- ස්ථානය: Do not install the heater near flammable materials, in areas where gasoline, paint, or other flammable liquids are stored, or where explosive dust is present. Maintain minimum clearances from walls and other objects as specified in the installation section.
- අධීක්ෂණය: Close supervision is necessary when any heater is used by or near children or invalids, and whenever the heater is left operating and unattended.
- අධික උනුසුම් වීම: To avoid overheating, do not cover the heater. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- නඩත්තු: Disconnect power at the main service panel before performing any maintenance or cleaning.
- තාප ස්ථාය: A separate thermostat is required for operation and is sold separately. Ensure the thermostat is compatible with a fan-forced heater.
නිෂ්පාදනය අවසන්view
The Stelpro pulsair RWF0502W is a 240V wall-mounted fan heater designed for supplemental heating in various rooms such as bedrooms, home offices, and living rooms. It utilizes both convection and forced air heating methods to efficiently distribute warmth.
ඉදිරිපස view of the Stelpro pulsair RWF0502W wall fan heater, showing the fan grille and lower air outlet.
Diagram showing the dimensions of the Stelpro pulsair RWF0502W wall fan heater: 17 1/8 inches (435 mm) height, 8 11/16 inches (220 mm) width, and 3 3/16 inches (80 mm) depth.
ස්ථාපනය
පෙර-ස්ථාපන පිරික්සුම් ලැයිස්තුව:
- ප්රධාන පරිපථ කඩනයේ විදුලිය විසන්ධි කර ඇති බවට වග බලා ගන්න.
- සැපයුම් පරිමාව බව තහවුරු කරන්නtage matches the heater's rating (240V).
- Confirm you have a compatible wall thermostat (sold separately).
- Gather necessary tools: screwdriver, wire strippers, drill, level, measuring tape.
සවි කිරීමේ විකල්ප:
The RWF0502W heater can be either surface-mounted directly to the wall or recessed into the wall for a flush finish. Ensure adequate clearance from floors, ceilings, and adjacent walls as per local codes and manufacturer recommendations.
The Stelpro pulsair RWF0502W wall fan heater installed in a modern entryway, positioned below a plant and mirror.
The Stelpro pulsair RWF0502W wall fan heater installed on a blue wall in an entryway, with coats and shoes nearby.
විදුලි සම්බන්ධතාවය:
This heater requires a 240V hardwired connection. Follow the wiring diagram provided and ensure all connections are secure and properly insulated. Connect the heater to a dedicated circuit protected by the appropriate circuit breaker.
Diagram illustrating the 240V hardwired connection for the Stelpro pulsair RWF0502W wall fan heater, showing wires connecting within a junction box.
- Turn off power at the main electrical panel.
- Remove the front grille of the heater to access the wiring compartment.
- Connect the supply wires to the heater's terminals according to the wiring diagram. Ensure proper grounding.
- Secure all connections with wire nuts and ensure no bare wires are exposed.
- Reattach the front grille.
- Install the external wall thermostat according to its manufacturer's instructions.
මෙහෙයුම
The Stelpro pulsair RWF0502W heater is controlled by an external wall thermostat (not included). Once installed and wired correctly, follow these steps:
- බල ගැන්වීම: Restore power to the heater circuit at the main electrical panel.
- තාප ස්ථාය සැකසුම: Adjust the external thermostat to your desired temperature. The heater will activate when the room temperature falls below the set point.
- මූලික මෙහෙයුම: During the first few minutes of operation, the heater may emit a slight odor due to the burning off of manufacturing residues. This is normal and will dissipate quickly.
- උෂ්ණත්ව පරාසය: The heater is designed to operate within a temperature range of 5°C (41°F) to 30°C (86°F).
For optimal performance, avoid placing furniture or other obstructions directly in front of the heater's air outlets.
නඩත්තු කිරීම
Regular maintenance ensures efficient and safe operation of your Stelpro pulsair heater. Always disconnect power at the main circuit breaker before performing any maintenance.
- පිරිසිදු කිරීම:
- Wipe the exterior of the heater with a soft, damp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවණ භාවිතා නොකරන්න.
- Periodically vacuum the air intake and outlet grilles to remove dust and lint buildup.
- පරීක්ෂාව: Annually inspect the heater for any signs of damage, loose connections, or unusual wear. If any issues are found, contact a qualified electrician for repair.
- ලිහිසිකරණය නැත: මෝටරය ස්ථිරවම ලිහිසි කර ඇති අතර අමතර තෙල් දැමීමක් අවශ්ය නොවේ.
දෝෂගවේෂණය
If your Stelpro pulsair heater is not operating correctly, consult the following table before contacting customer support.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| තාපකය සක්රිය නොවේ. | ඒකකයට බලය නැත. තාප ස්ථාය සකසා ඇත්තේ ඉතා අඩු මට්ටමක ය. පරිපථ කඩන යන්ත්රය පෙරලී ඇත. | Check main electrical panel. තාප ස්ථාය සැකසුම වැඩි කරන්න. පරිපථ කඩනය නැවත සකසන්න. |
| හීටරය ප්රමාණවත් තාපයක් නිපදවන්නේ නැත. | කාමරයේ ප්රමාණය හීටරයට ප්රමාණවත් තරම් විශාල නොවේ. Airflow obstructed. තාප පාලක ක්රමාංකන ගැටලුව. | Ensure heater is appropriately sized for the room. Clear obstructions from grilles. Consult thermostat manual or a qualified electrician. |
| මෙහෙයුම අතරතුර අසාමාන්ය ශබ්දය. | ලිහිල් සංරචක. Debris in fan. | Disconnect power and inspect for loose parts. Disconnect power and carefully remove any debris. If noise persists, contact support. |
| හීටරය නිතර නිතර සක්රිය සහ අක්රිය වේ. | Thermostat location or setting. අධික උනුසුම් ආරක්ෂාව සක්රිය කර ඇත. | Relocate thermostat away from drafts or direct heat sources. Adjust thermostat differential. Ensure grilles are clear and heater is not covered. Allow unit to cool. |
පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | ස්ටෙල්ප්රෝ |
| ආදර්ශ අංකය | RWF0502W |
| සවිකිරීමේ වර්ගය | Wall Mount (Surface or Recessed) |
| කාමර වර්ගය | නිදන කාමරය, ගෘහ කාර්යාලය, විසිත්ත කාමරය |
| වෙළුමtage | වෝල්ට් 240 |
| Ampකෝපය | 2.08 Amps |
| උනුසුම් ක්රමය | Convection, Forced Air |
| අවම උෂ්ණත්ව සැකසුම | සෙල්සියස් අංශක 5 (41°F) |
| උපරිම උෂ්ණත්ව සැකසුම | සෙල්සියස් අංශක 30 (86°F) |
| අයිතමයේ බර | රාත්තල් 7 කි |
| පැකේජ මානයන් | අඟල් 17.72 x 9.13 x 3.58 |
| UPC | 626296002285 |
වගකීම් සහතිකය
Stelpro products are manufactured to high standards and are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Stelpro webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
පාරිභෝගික සහාය
For technical assistance, replacement parts, or further inquiries, please contact Stelpro customer service. Contact information can typically be found on the product packaging, the official Stelpro website, or by referring to the documentation included with your purchase.
Note: Always provide your product model number (RWF0502W) when contacting support.
