CTEK XS 7000

හැඳින්වීම

The CTEK XS 7000 is an advanced, fully automatic 7-step battery charger designed for optimal charging and maintenance of 12V lead-acid batteries. This charger is suitable for a wide range of battery sizes, from 14Ah up to 150Ah for charging, and up to 225Ah for maintenance charging. Its user-friendly design allows for a simple plug-and-forget operation, ensuring your battery is always in peak condition.

ප්රධාන ලක්ෂණ

• Fully Automatic 7-Step Charging: Ensures optimal battery performance and longevity.
• Patented Desulphation Function: Helps to restore sulphated batteries.
• Automatic Battery Diagnosis: Determines if the battery can receive and hold a charge.
• පහසුවෙන් කියවිය හැකි LED සංදර්ශකය: Provides clear indication of the charging process.
• ආරක්ෂිත මෙහෙයුම: Spark-free, reverse polarity protected, and short-circuit proof.
• කල් පවතින නිර්මාණය: Splash and dustproof (IP65 rated) for various environments.
• Patented Maintenance Charge: Extends battery life for long-term storage.

පැකේජයේ අන්තර්ගතය

Upon unboxing your CTEK XS 7000, please ensure all the following components are present:

• CTEK XS 7000 Battery Charger Unit
• Connection Cables with Eyelet Connectors
• Connection Cables with Clamp Connectors (High Quality Clips)

Image: Included accessories for the CTEK XS 7000, showing both the eyelet and clamp සම්බන්ධක කේබල්.

සැකසුම සහ සම්බන්ධතාවය

Follow these steps to safely set up and connect your CTEK XS 7000 battery charger:

1. බැටරිය සූදානම් කරන්න: බැටරි පර්යන්ත පිරිසිදු බවත් විඛාදනයෙන් තොර බවත් සහතික කර ගන්න.
2. බැටරියට සම්බන්ධ වන්න: Choose the appropriate connection cables (eyelet or clamp). Connect the red (+) cable to the positive battery terminal and the black (-) cable to the negative battery terminal. Ensure a secure connection.
3. ප්‍රධාන විදුලියට සම්බන්ධ වන්න: Plug the charger's power cord into a suitable wall outlet.
4. අයකිරීම ආරම්භ කරන්න: The charger will automatically begin its diagnostic and charging process. There is no need to press a mode button.

Image: The CTEK XS 7000 charger connected to a battery using the provided clamp සම්බන්ධක.

මෙහෙයුම් උපදෙස්

The CTEK XS 7000 operates as a fully automatic 7-step charger. Once connected, it will proceed through the following stages:

• Step 1: Desulphation: Detects sulphated batteries and applies a pulsed voltage to remove sulphate from the lead plates, restoring battery capacity.
• Step 2: Soft Start: Tests if the battery can accept charge. This step prevents charging a defective battery.
• Step 3: Bulk: ප්‍රධාන ආරෝපණයtage where 80% of the charge is delivered. The charger delivers maximum current until the battery voltage නියමිත මට්ටමකට ළඟා වේ.
• Step 4: Absorption: Completes the charge up to 100%. The current decreases as the battery voltage reaches its maximum.
• Step 5: Analyze: Tests if the battery can hold charge. If the battery voltage drops, the charger will restart the charging cycle.
• Step 6: Recond (Recondition): This step is for deeply discharged batteries. It mixes the battery acid and restores the battery capacity. (Note: The XS 7000 does not have a manual Recond mode, it's part of the automatic process if needed).
• Step 7: Float: Maintains the battery at maximum charge by providing a constant voltagඊ අයකිරීම.
• Step 8: Pulse (Maintenance Charging): Maintains the battery at 95–100% capacity. The charger monitors the battery voltage and gives a pulse when needed.

The clear LED display on the charger indicates the current charging stage and battery status. If the charger detects an issue, such as reverse polarity, an error indicator will light up.

රූපය: ඉහළට view of the CTEK XS 7000, showing the LED indicators for charging stages and the 'RESET' button.

බොත්තම නැවත සකස්: If an error occurs or you wish to restart the charging process, press the 'RESET' button on the charger.

නඩත්තු කිරීම

The CTEK XS 7000 is designed for durability and minimal maintenance. Its IP65 rating means it is splash and dustproof. To ensure optimal performance and longevity:

• Keep the charger clean and free from excessive dust or debris.
• Store the charger in a dry, well-ventilated area when not in use.
• Inspect cables and connectors periodically for any signs of damage or wear. Replace if necessary.
• චාජරය වතුරේ ගිල්වන්න එපා.

දෝෂගවේෂණය

If you encounter issues with your CTEK XS 7000, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact CTEK customer support.

පිරිවිතර

වගකීම් සහ සහාය

For warranty information and technical support, please refer to the official CTEK webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔබේ සිල්ලර වෙළෙන්දා අමතන්න. ඕනෑම වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

CTEK Official Webඅඩවිය: www.ctek.com