Perlegear TV Wall Mount PGXSF1 Instruction Manual

1. හැඳින්වීම

This instruction manual provides detailed guidance for the safe and proper installation, operation, and maintenance of your Perlegear TV Wall Mount, model PGXSF1. Please read this manual thoroughly before installation and retain it for future reference. Incorrect installation may result in product damage or personal injury.

2. නිෂ්පාදන අවසන්view

The Perlegear PGXSF1 is a full-motion TV wall mount designed for flat-screen LED, LCD, and OLED televisions. It offers flexibility in viewing angles and space-saving features.

ප්රධාන ලක්ෂණ:

• තිර ප්‍රමාණයේ ගැළපුම: Fits most 10 to 32-inch televisions.
• බර ධාරිතාව: Supports TVs up to 20 kg (44 lbs).
• VESA අනුකූලතාව: 50x50mm, 75x75mm, 100x100mm.
• චලනය:
  • Tilt: +5° to -15°
  • කරකැවීම: +/- 90°
  • භ්රමණය: 360°
• දිගුව: Retracts to 7.9 cm (3.1 inches) from the wall and extends up to 44 cm (17.3 inches).
• ද්රව්ය: High-grade alloy steel construction.

රූපය 2.1: ප්රධාන view of the Perlegear PGXSF1 TV Wall Mount.

රූපය 2.2: VESA mounting pattern compatibility (50x50mm, 75x75mm, 100x100mm).

රූපය 2.3: The mount is tested to support up to 20 kg (44 lbs).

3 ආරක්ෂිත තොරතුරු

අවවාදයයි: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty.

• Do not begin installation until you have read and understood all instructions and warnings contained in this manual.
• සවිකරන පෘෂ්ඨය සවිකිරීමේ සහ රූපවාහිනියේ ඒකාබද්ධ බරට ආරක්ෂිතව සහාය විය හැකි බවට සහතික වන්න.
• This product is designed for installation on wood studs, solid concrete, or brick walls. වියලි පවුර මත පමණක් සවි නොකරන්න.
• Use only the hardware provided or specified by Perlegear.
• If you have any doubts about the installation process, consult a qualified professional.
• ස්ථාපනය අතරතුර ළමුන් සහ සුරතල් සතුන් ඈත් කර තබන්න.
• Periodically check that the mount is secure and all fasteners are tight.

4. පැකේජ අන්තර්ගතය

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact Perlegear customer service.

• 1x TV Wall Mount Assembly (Wall Plate and Arm)
• 2x Wall / Lag Screws
• 2x Wall Screw Washers
• 2x Concrete Anchors (Rawl Plugs)
• 4x M4 Screws (16mm length)
• 4x M4 Screws (30mm length)
• 4x M6 Screws (16mm length)
• 4x M6 Screws (30mm length)
• 4x Spacers (10mm thickness)
• 8x Spacers (5mm thickness)
• 4x Silver Double Washers
• උපදෙස් අත්පොත

5. පිහිටුවීම සහ ස්ථාපනය

ආරක්ෂිත ස්ථාපනයක් සඳහා මෙම පියවර ප්‍රවේශමෙන් අනුගමනය කරන්න.

5.1 පූර්ව-ස්ථාපන පරීක්ෂාවන්:

1. රූපවාහිනී අනුකූලතාව සත්‍යාපනය කරන්න: Ensure your TV's screen size is between 10 and 32 inches, its weight does not exceed 20 kg, and its VESA mounting pattern is 50x50mm, 75x75mm, or 100x100mm.
2. බිත්ති වර්ගය හඳුනා ගන්න: Determine if your wall is wood stud, solid concrete, or brick. Do not install on drywall alone.
3. මෙවලම් එකතු කරන්න: You will need a drill, stud finder (for wood studs), level, pencil, and screwdriver.

5.2 Wall Plate Installation:

1. කැණීම් ස්ථානය සලකුණු කරන්න: Hold the wall plate against the wall at your desired height. Use a level to ensure it is straight. Mark the two drilling points through the holes on the wall plate.
2. සරඹ නියමු සිදුරු:
   • For Wood Studs: Drill two pilot holes (e.g., 5.5mm / 7/32 inch diameter) at the marked locations to a depth of 60mm (2.36 inches).
   • For Concrete/Brick Walls: Drill two pilot holes (e.g., 10mm / 3/8 inch diameter) at the marked locations to a depth of 60mm (2.36 inches). Insert the concrete anchors (rawl plugs) into these holes, ensuring they are flush with the wall surface.
3. බිත්ති තහඩුව සවි කරන්න: Align the wall plate with the pilot holes. Insert the wall/lag screws through the wall plate and into the pilot holes (and anchors if applicable). Use the wall screw washers. Tighten the screws firmly until the wall plate is securely fastened to the wall. Do not overtighten.

5.3 Attaching TV to Mount:

1. Select TV Screws and Spacers: Choose the appropriate M4 or M6 screws that fit your TV's VESA holes. The screws should be long enough to securely engage the TV's threads but not so long as to damage internal components. Use the provided spacers if your TV has an uneven back or recessed mounting holes.
2. Attach Mount to TV: Carefully align the VESA plate of the mount with the mounting holes on the back of your TV. Insert the selected screws through the VESA plate (and spacers if used) and into the TV's mounting holes. Tighten securely with a screwdriver.

6. මෙහෙයුම් උපදෙස්

Once installed, your Perlegear PGXSF1 mount allows for various adjustments to optimize your viewඅත්දැකීමෙන්.

Adjusting the TV Position:

• දිගු කිරීම සහ ආපසු ගැනීම: Gently pull the TV away from the wall to extend the arm, or push it towards the wall to retract it. The arm extends up to 44 cm and retracts to 7.9 cm.
• කරකැවීම: Carefully pivot the TV left or right up to +/- 90 degrees to achieve the desired horizontal viewing angle. The maximum swivel angle may vary depending on TV size and distance from the wall.

රූපය 6.1: Swivel the TV left or right for optimal viewing.
• ඇලවීම: සිරස් අතට සකසන්න viewing angle by tilting the TV +5 degrees upwards or -15 degrees downwards. Loosen the tilt adjustment knobs (if present) slightly, adjust the angle, and then re-tighten to secure.


රූපය 6.2: Tilt the TV up or down to reduce glare or adjust viewing උස.

• භ්රමණය: The TV can be rotated 360 degrees, allowing for landscape or portrait orientation. This feature is useful for specific applications or to correct minor leveling issues after installation.


රූපය 6.3: Rotate the TV 360 degrees for flexible orientation.

7. නඩත්තු කිරීම

නිතිපතා නඩත්තු කිරීම ඔබේ රූපවාහිනී බිත්ති සවිකිරීමේ ආයු කාලය සහ ආරක්ෂිත ක්‍රියාකාරිත්වය සහතික කරයි.

• පිරිසිදු කිරීම: මෘදු වියළි රෙද්දකින් සවි කිරීම පිස දමන්න. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක භාවිතා නොකරන්න.
• වරින් වර පරීක්ෂා කිරීම්: Every few months, check all screws and bolts to ensure they are securely tightened. Re-tighten if necessary.
• ලිහිසි තෙල්: If the swivel or tilt mechanisms become stiff, a small amount of silicone-based lubricant (e.g., WD-40) can be applied to the moving joints. Wipe off any excess.

8. දෝශ නිරාකරණය

මෙම කොටසින් ඔබට මුහුණ දීමට සිදුවිය හැකි පොදු ගැටළු සාකච්ඡා කෙරේ.

Issue: Mount movement (swivel/tilt) is stiff.

විසඳුම: The joints may be overtightened or require lubrication. Locate the nuts on the swivel and tilt mechanisms. Slightly loosen them to allow for easier movement, then re-tighten to a comfortable tension. Apply a small amount of silicone-based lubricant to the moving parts if needed.

ගැටලුව: ස්ථාපනය කිරීමෙන් පසු රූපවාහිනිය සමතලා නොවේ.

විසඳුම: The 360-degree rotation feature allows for minor leveling adjustments. Gently rotate the TV until it is level. If the issue persists, re-check the wall plate installation with a level.

Issue: Screws do not fit my TV.

විසඳුම: The package includes a variety of M4 and M6 screws of different lengths, along with spacers. Ensure you are using the correct diameter and length for your TV's VESA holes. If none of the provided screws fit, you may need to purchase specific screws compatible with your TV model. Consult your TV's manual for VESA screw specifications.

9. පිරිවිතර

10. වගකීම් සහ සහාය

This Perlegear TV Wall Mount PGXSF1 comes with a වසර 10ක නිෂ්පාදකයාගේ වගකීමක්.

For technical assistance, missing parts, or warranty claims, please contact Perlegear customer support. Refer to the product packaging or the official Perlegear webනවතම සම්බන්ධතා තොරතුරු සඳහා අඩවිය.

Please have your model number (PGXSF1) and purchase information ready when contacting support.