GameMax Mirage 120mm PC Cooling Fan Instruction Manual

1. හැඳින්වීම

The GameMax Mirage 120mm PC Cooling Fan is designed to provide efficient cooling for computer components while offering customizable RGB lighting. This fan features a dual-ring Rainbow LED design, a hydraulic bearing for quiet operation, and a 7-blade fan structure. It is compatible with 5V addressable 3-pin Aura Sync systems, allowing for synchronized lighting effects with compatible motherboards or controllers.

රූපය 1.1: ඉදිරිපස view of the GameMax Mirage fan with active Rainbow LED lighting.

2 ආරක්ෂිත තොරතුරු

• Ensure your computer system is powered off and unplugged from the wall outlet before installation or maintenance.
• Handle components with care to avoid damage from static electricity. Consider using an anti-static wrist strap.
• Do not force connectors. Ensure correct orientation before plugging in cables.
• Keep the fan away from liquids and excessive moisture.
• මෙම අත්පොතෙහි විස්තර කර ඇති ප්‍රමාණයට වඩා විදුලි පංකා ඒකකය විසුරුවා හැරීමට උත්සාහ නොකරන්න.

3. පැකේජ අන්තර්ගතය

ඔබගේ පැකේජයේ සියලුම අයිතම ඇති බව තහවුරු කරගන්න:

• 1 x GameMax Mirage 120mm PC Cooling Fan
• 4 x සවිකරන ඉස්කුරුප්පු

Image 3.1: Retail packaging for the GameMax Mirage fan.

4. පිහිටුවීම සහ ස්ථාපනය

Follow these steps to install your GameMax Mirage 120mm PC Cooling Fan:

1. ඔබේ පද්ධතිය සූදානම් කරන්න: Power off your computer and unplug it from the power outlet. Open your computer case to access the fan mounting locations.
2. විදුලි පංකාව සවි කරන්න: Position the fan in your desired location (e.g., case front, rear, top, or radiator). Ensure the airflow direction is correct for your cooling setup. Use the four included mounting screws to secure the fan to the chassis or radiator. The fan features rubber pads on the corners to help reduce vibration.
3. විදුලි පංකා බලය සම්බන්ධ කරන්න: Locate the 3-pin power connector on the fan cable. Connect this cable to an available 3-pin fan header on your motherboard or a fan controller.
4. RGB ආලෝකකරණය සම්බන්ධ කරන්න: Locate the 5V addressable 3-pin Aura connector on the fan cable. Connect this to a compatible 5V ARGB header on your motherboard (often labeled 'VDG' or 'ARGB') or an external RGB controller/hub. Warning: Do not connect this to a 12V RGB header, as it will damage the LEDs.

Image 4.1: The 3-pin power connector (top) and 5V addressable 3-pin Aura connector (bottom).

The fan cables are braided for improved aesthetics and durability, helping to keep your build neat and tidy.

5. මෙහෙයුම් උපදෙස්

Once installed, the GameMax Mirage fan operates as follows:

• විදුලි පංකා වේග පාලනය: The fan speed is controlled via the 3-pin power connector. If connected to a motherboard fan header, the speed can typically be adjusted through your motherboard's BIOS/UEFI settings or dedicated software.
• RGB ආලෝකකරණ පාලනය: The Rainbow LED lighting is controlled via the 5V addressable 3-pin Aura connector.
• If connected to a compatible motherboard (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync), you can use the motherboard's software to customize lighting effects, colors, and synchronization with other ARGB components.
• If connected to an external RGB hub/controller, refer to the instructions provided with your specific hub/controller for lighting customization options.

රූපය 5.1: කෝණික view of the GameMax Mirage fan showcasing its dual-ring Rainbow LED lighting.

6. නඩත්තු කිරීම

නිතිපතා නඩත්තු කිරීම ඔබේ සිසිලන විදුලි පංකාවේ ප්‍රශස්ත ක්‍රියාකාරිත්වය සහ කල්පැවැත්ම සහතික කිරීමට උපකාරී වේ:

• දූවිලි පිරිසිදු කිරීම: Periodically inspect the fan blades and frame for dust accumulation. Use compressed air or a soft brush to gently remove dust. Ensure the fan is powered off and unplugged before cleaning.
• කේබල් පරීක්ෂාව: Occasionally check the power and RGB cables for any signs of wear or damage.

7. දෝශ නිරාකරණය

• විදුලි පංකාව කැරකෙන්නේ නැත:
  • Ensure the 3-pin power connector is securely plugged into a functional fan header on the motherboard or controller.
  • Check motherboard BIOS/UEFI settings to ensure the fan header is enabled and configured correctly.
• LEDs Not Lighting Up or Incorrect Colors:
  • Verify the 5V addressable 3-pin Aura connector is securely connected to a compatible 5V ARGB header (not 12V RGB).
  • Ensure your motherboard's RGB software or external controller is properly installed and configured.
  • If using a splitter or hub, ensure it is powered and functioning correctly.
• අධික ශබ්දය:
  • Check for any cables or obstructions interfering with the fan blades.
  • Ensure the fan is securely mounted and the rubber pads are properly seated to absorb vibrations.
  • Dust accumulation can cause imbalance and noise; clean the fan as described in the Maintenance section.

8. පිරිවිතර

රූපය 8.1: ආපසු view of the GameMax Mirage fan, displaying the product label with model and electrical specifications.

9. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the official GAMEMAX webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔබේ සිල්ලර වෙළෙන්දා අමතන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.