ඩොනර් අඳුරු මූසික විකෘති පැඩල් පරිශීලක අත්පොත

1. හැඳින්වීම

The Donner Dark Mouse Distortion Pedal is an effect unit designed for electric guitar, providing a range of distortion tones. It features two distinct distortion modes and a true bypass design to maintain signal integrity when the effect is disengaged. This manual provides essential information for setting up, operating, and maintaining your pedal.

Figure 1: The Donner Dark Mouse Distortion Pedal, designed to deliver classic distortion sounds.

2. නිෂ්පාදන අවසන්view

The Dark Mouse pedal features intuitive controls for shaping your sound. Understanding these controls is key to utilizing the pedal's full potential.

Figure 2: Control layout of the Dark Mouse Distortion Pedal.

පාලන:

• 1. DC 9V Jack: Power input for a 9V DC adapter (center negative).
• 2. Mode Switch (CLASSIC/HYPER): Toggles between two distinct distortion characteristics.
• 3. LEVEL Knob: බලපෑමේ සමස්ත ප්‍රතිදාන පරිමාව සකසයි.
• 4. FILTER Knob: Controls the tone or brightness of the distortion. Turning clockwise increases treble.
• 5. DIST Knob: Adjusts the amount of distortion or gain.
• 6. Input Jack: Connect your guitar or previous effect pedal here.
• 7. Output Jack: ඔබගේ වෙත සම්බන්ධ වන්න ampලිෆයර් හෝ ඊළඟ ප්‍රයෝග පැඩලය.
• 8. LED දර්ශකය: බලපෑම සක්‍රිය වූ විට ආලෝකමත් වේ.
• 9. පාද ස්විචය: Engages or disengages the effect.

3. පිහිටුවීම

Follow these steps to connect your Donner Dark Mouse Distortion Pedal:

1. ඔබේ ampසම්බන්ධතා ඇති කර ගැනීමට පෙර lifier ක්‍රියා විරහිත කර ඇත.
2. ඔබේ විදුලි ගිටාරය සම්බන්ධ කරන්න ආදාන ජැක් (6) of the pedal using a standard 1/4-inch instrument cable.
3. සම්බන්ධ කරන්න නිමැවුම් ජැක් (7) පැඩලයේ ඔබේ ampතවත් සම්මත 1/4-අඟල් උපකරණ කේබලයක් භාවිතයෙන් ලයිෆයර් ආදානය.
4. Connect a 9V DC power adapter (center negative, 500mA minimum) to the DC 9V ජැක් (1) Note: The power supply is not included. Using an incorrect power supply may damage the pedal.
5. Once all connections are secure, you may turn on your ampජීවිතාරක්ෂකයා.

Figure 3: Proper connection of the pedal to power and instrument cables.

4. මෙහෙයුම් උපදෙස්

The Dark Mouse pedal offers two distinct distortion modes and flexible controls to tailor your sound.

බලපෑමට සම්බන්ධ වීම:

ඔබන්න ෆුට්ස්විච් (9) to toggle the effect on or off. The LED දර්ශකය (8) will illuminate when the effect is active.

Selecting Distortion Modes:

භාවිතා කරන්න මාදිලියේ ස්විචය (2) to select between the two distortion modes:

• ක්ලැසික්: උණුසුම්, vin නිෂ්පාදනය කරයිtage distortion sound with a subtle fuzz characteristic.
• HYPER: Offers a more powerful and aggressive sound with enhanced edges and low-end response.

Figure 4: The mode switch allows selection between Classic and Hyper distortion.

Adjusting Tone and Gain:

Utilize the three control knobs to fine-tune your distortion sound:

• LEVEL Knob (3): Adjust this to set the overall output volume of the pedal. Start with it at a moderate level and adjust to match your bypassed signal volume.
• DIST Knob (5): Turn this knob clockwise to increase the amount of distortion, from subtle crunch to heavy saturation.
• FILTER Knob (4): This control acts as a tone shaping filter. Turning it clockwise will increase the brightness and treble content of the distortion, while turning it counter-clockwise will result in a darker tone.

Figure 5: The Level, Dist, and Filter knobs provide flexible control over the effect.

සැබෑ බයිපාස්:

The pedal features true bypass circuitry. This means that when the effect is disengaged, your guitar signal passes directly through the pedal without any electronic interference, preserving your original tone. The LED indicator will be off when in true bypass mode.

Figure 6: True bypass ensures a clean signal when the effect is off.

5. නඩත්තු කිරීම

• පිරිසිදු කිරීම: Use a soft, dry cloth to clean the pedal's exterior. Avoid using abrasive cleaners or solvents.
• ගබඩා: අධික උෂ්ණත්වයන්ගෙන් සහ සෘජු හිරු එළියෙන් ඈත්ව වියළි පරිසරයක පැඩලය ගබඩා කරන්න.
• බල සැපයුම: Always use a 9V DC center-negative power adapter with a minimum of 500mA current. Disconnect the power supply when the pedal is not in use for extended periods.
• ශාරීරික සත්කාර: The pedal features a durable aluminum alloy casing. Avoid dropping the pedal or subjecting it to excessive force.

6. දෝශ නිරාකරණය

• ශබ්දයක් නැත:
  • සියලුම කේබල් සම්බන්ධතා පරීක්ෂා කරන්න (ගිටාරය සිට ආදානය, ප්‍රතිදානය දක්වා amp).
  • Ensure the power adapter is correctly connected and providing power.
  • ඔබේ ගිටාරය සහ amplifier are functioning correctly.
  • If the LED is off, press the footswitch to engage the effect.
• Weak or Distorted Sound (when bypassed):
  • This pedal features true bypass, so a weak or distorted bypassed signal usually indicates an issue with cables or other equipment in your signal chain, not the pedal itself.
• අනවශ්‍ය ශබ්දය/හම්:
  • Ensure you are using a regulated 9V DC center-negative power supply. Unregulated power supplies can introduce noise.
  • දෝෂ සහිත කේබල් සඳහා පරීක්ෂා කරන්න.
  • Move the pedal away from power transformers or other electronic devices that may cause interference.

7. පිරිවිතර

8. පෙට්ටියේ ඇති දේ

• 1 x Donner Dark Mouse pedal

9. වගකීම් සහ සහාය

For warranty information or technical support, please refer to the official Donner website or contact Donner customer service directly. Keep your purchase receipt for warranty claims.