හැඳින්වීම
The RCF F-10XR is a versatile 10-channel professional mixing console designed for a wide range of audio applications, from live sound to studio recording. It features high-quality preamplifiers, a comprehensive EQ section, built-in 24-bit multi-effects, and a USB audio interface for direct recording and playback. This manual provides detailed instructions for setting up, operating, and maintaining your F-10XR mixer to ensure optimal performance and longevity.
ආරක්ෂිත තොරතුරු
- බල සැපයුම: නිශ්චිත බල ඇඩැප්ටරය පමණක් භාවිතා කරන්න. පරිමාව සහතික කරන්නtage matches your local power supply. Disconnect power before cleaning or servicing.
- වාතාශ්රය: වාතාශ්රය විවරයන් අවහිර නොකරන්න. අධික උනුසුම් වීම වැළැක්වීම සඳහා ඒකකය වටා ප්රමාණවත් වායු ප්රවාහයක් සහතික කරන්න.
- තෙතමනය: Do not expose the unit to rain, moisture, or excessive humidity. Keep liquids away from the mixer.
- ස්ථානගත කිරීම: Place the mixer on a stable, flat surface. Avoid placing it near heat sources or in direct sunlight.
- සේවා: ඒකකයට ඔබම සේවා සැපයීමට උත්සාහ නොකරන්න. සියලුම සේවා සුදුසුකම් ලත් පුද්ගලයින් වෙත යොමු කරන්න.
- ශ්රවණ ආරක්ෂණය: Prolonged exposure to high volume levels can cause permanent hearing damage. Use caution when setting output levels.
සැලසුම
Follow these steps to set up your RCF F-10XR mixer:
- ඇසිරීම: Carefully remove the mixer from its packaging and inspect it for any signs of damage.
- බල සම්බන්ධතාවය: Connect the provided power adapter to the mixer's power input and then to a suitable electrical outlet. Ensure the mixer's power switch is in the OFF position before connecting.
- ආදාන සම්බන්ධතා:
- මයික්රෆෝන: Connect microphones to the XLR (MIC IN) inputs on channels 1-4. For condenser microphones requiring phantom power, ensure the +48V switch is engaged (see Operating Instructions).
- රේඛීය මට්ටමේ උපාංග: Connect instruments or other line-level devices to the 1/4" TRS (LINE IN) inputs on channels 1-4, or to the stereo 1/4" TRS (MONO/STEREO) inputs on channels 5/6, 7/8, and 9/10. Channels 7/8 and 9/10 also feature RCA inputs for stereo line-level sources.
- ප්රතිදාන සම්බන්ධතා:
- ප්රධාන නිමැවුම්: Connect your main PA system or recording interface to the MAIN OUTPUT R and L XLR or 1/4" TRS jacks.
- Control Room: Connect studio monitors to the CTRL ROOM OUTPUT 1/4" TRS jacks.
- හෙඩ්ෆෝන්: Connect headphones to the PHONES OUTPUT 1/4" TRS jack.
- AUX ප්රතිදානය: Use the AUX OUTPUT 1/4" TRS jack for sending a monitor mix or external effects.
- USB සම්බන්ධතාවය: For stereo recording and playback, connect a USB cable from the mixer's USB port to your computer or compatible iOS device (with appropriate adapter).
රූපය 1: ඉවරයිview of the RCF F-10XR mixer's top panel, highlighting the various input and output connections, along with the main control sections for each channel, effects, and master outputs. The image clearly shows the MIC IN, LINE IN, STEREO LINE INPUTs, MAIN OUTPUT, CTRL ROOM OUTPUT, PHONES OUTPUT, and AUX OUTPUT sections, as well as the individual channel strips with GAIN, EQ, AUX/FX, PAN/BAL, and LEVEL controls. The PRO DSP FX section and the main mix fader are also visible.
මෙහෙයුම් උපදෙස්
Input Channels (1-4)
- MIC IN / LINE IN: XLR inputs for microphones and 1/4" TRS inputs for line-level signals.
- ලාභය: Adjusts the input sensitivity for the connected microphone or line source. Set this to achieve a healthy signal level without clipping (indicated by the PEAK LED).
- COMP (Channels 1 & 2 only): Single-knob compressor for dynamic range control. Turn clockwise to increase compression.
- EQ (ඉහළ, මැද, අඩු): 3-band equalizer for shaping the tone of the input signal.
- EQ HIGH (10 kHz): Adjusts treble frequencies.
- EQ MID (1250 Hz): Adjusts mid-range frequencies.
- EQ LOW (100 Hz): Adjusts bass frequencies.
- AUX/FX POST: Sends a portion of the channel signal to the internal effects processor or external AUX output. This is a post-fader send, meaning its level is affected by the channel fader.
- පෑන්: Adjusts the stereo position of the channel signal in the main mix (left to right).
- මට්ටම: The main fader for controlling the output level of the individual channel to the main mix.
- පීක් LED: Illuminates when the input signal is too high, indicating potential clipping. Reduce the GAIN control if this LED lights up frequently.
Stereo Channels (5/6, 7/8, 9/10)
- STEREO INPUT: 1/4" TRS inputs for channels 5/6, 7/8, 9/10. Channels 7/8 and 9/10 also include RCA inputs.
- ලාභය: Adjusts the input sensitivity for the stereo line source.
- EQ (High, Low): 2-band equalizer for shaping the tone of the stereo input signal.
- AUX/FX POST: Sends a portion of the channel signal to the internal effects processor or external AUX output.
- BAL (ශේෂය): Adjusts the balance between the left and right signals of the stereo channel.
- මට්ටම: The main fader for controlling the output level of the stereo channel to the main mix.
- පීක් LED: Illuminates when the input signal is too high.
ෆැන්ටම් පවර් (+48V)
The F-10XR provides +48V phantom power for condenser microphones on channels 1-4. Engage the PHANTOM POWER +48V CH1/4 switch to activate. Ensure all condenser microphones are connected before engaging phantom power, and disconnect them after disengaging to prevent damage.
PRO DSP FX (Internal Effects)
The mixer includes a 24-bit internal effects processor with 16 studio-quality presets. To use the effects:
- බලපෑම තෝරන්න: කරකවන්න ROTATE TO SEL knob to choose one of the 16 effects. The selected effect number will be displayed.
PRO DSP FX Presets නැත. බලපෑම නැත. බලපෑම 01 කුඩා ශාලාව 09 ඇනලොග් ප්රමාදය 02 විශාල ශාලාව 10 කෝරස් ක්රියා පදය 03 කුඩා කාමරය 11 ස්ටීරියෝ කෝරස් 04 දීප්තිමත් කාමරය 12 ෆ්ලැන්ගර් 05 තුනී තහඩුව 13 ෆැසර් 06 තහඩුව 14 Gated Reverb 07 Spring Reverb 15 Flanger Verb 08 බහු ටැප් ප්රමාදය 16 Vocal Echo - Apply Effect: භාවිතා කරන්න AUX/FX POST knobs on individual channels to send signal to the effects processor.
- FX MASTER: Controls the overall level of the effects sent to the main mix.
- FX ආපසු: Controls the level of the processed effect signal returning to the main mix.
- FX MUTE: Mutes the effects output.
USB පටිගත කිරීම සහ නැවත ධාවනය
The F-10XR features a built-in USB audio interface for stereo recording and playback with a computer or compatible iOS device.
- පටිගත කිරීම: Connect the mixer to your computer via USB. The mixer will appear as an audio input device. Select it in your Digital Audio Workstation (DAW) software to record the stereo main mix.
- පසුධාවනය: Audio played from your computer can be routed back to the mixer via USB. The IN USB IN 9/10 switch routes the USB playback to stereo channel 9/10, allowing you to mix it with other inputs.
ප්රතිදාන අංශය
- MAIN MIX: The master fader controls the overall output level of the main stereo mix.
- OUTPUT LEVEL Meter: LED meters display the output level of the main mix. Aim for levels that are strong but do not consistently peak into the red.
- CTRL ROOM LEVEL: Adjusts the volume for the Control Room outputs.
- PHONES LEVEL: Adjusts the volume for the Headphones output.
- පාද මාරු කිරීම: Input for an optional footswitch to control certain functions (e.g., FX Mute).
නඩත්තු කිරීම
- පිරිසිදු කිරීම: Use a soft, dry cloth to clean the mixer's surface. Do not use abrasive cleaners, solvents, or waxes.
- දූවිලි: Regularly remove dust from the ventilation openings using a soft brush or compressed air.
- නොබ්ස් සහ ෆේඩර්ස්: Avoid applying excessive force to knobs and faders. If they become stiff or noisy, consult a qualified technician.
- ගබඩා: දිගු කාලයක් භාවිතයේ නොමැති විට, මික්සර් එක සිසිල්, වියළි ස්ථානයක, සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව ගබඩා කරන්න.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| ශබ්ද ප්රතිදානයක් නොමැත | Power off; cables disconnected; master fader down; channel fader down; incorrect input/output routing. | Check power, all cable connections, MAIN MIX fader, individual channel LEVEL faders, and correct input/output selection. |
| විකෘති ශබ්දය | Input GAIN too high; output levels too high; faulty cable. | Reduce input GAIN (ensure PEAK LED does not light up); lower MAIN MIX or channel LEVEL faders; try a different cable. |
| මායා බලයක් නැත | +48V switch not engaged; faulty microphone or cable. | Engage the PHANTOM POWER +48V CH1/4 switch; test with a different microphone or cable. |
| බලපෑම් ක්රියා නොකරයි | FX MASTER or FX RETURN down; AUX/FX POST on channel down; FX MUTE engaged. | Increase FX MASTER and FX RETURN levels; increase AUX/FX POST on desired channels; disengage FX MUTE. |
| USB පටිගත කිරීමේ/පසුධාවන ගැටළු | Incorrect USB connection; driver issues (Windows); incorrect audio settings in DAW. | Ensure USB cable is securely connected; check computer's audio device settings; verify DAW input/output selection. |
පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | F10XR |
| නාලිකා ගණන | 10 |
| මයික්රොෆෝන ආදාන | 4 (XLR, with +48V Phantom Power) |
| රේඛා ආදාන | 2 Mono (1/4" TRS), 4 Stereo (1/4" TRS, 7/8 & 9/10 also RCA) |
| EQ (Mono Channels) | 3-band (High, Mid, Low) |
| EQ (Stereo Channels) | 2-band (High, Low) |
| සම්පීඩක | 2 (Single-knob, on channels 1 & 2) |
| Internal Effects | PRO DSP FX with 16 presets (24-bit) |
| USB ශ්රව්ය අතුරුමුහුණත | Stereo Recording and Playback (USB 2.0 Type B) |
| ප්රධාන නිමැවුම් | 1 Stereo (XLR + TRS) |
| පාලක කාමර ප්රතිදානය | Yes (TRS) |
| හෙඩ්ෆෝන් ප්රතිදානය | Yes (TRS) |
| AUX ප්රතිදානය | 1 (TRS) |
| අයිතමයේ බර | රාත්තල් 8.25 (කිලෝග්රෑම් 3.75) |
| නිෂ්පාදන මානයන් | අඟල් 10.83 x 11.57 x 3.23 |
| බලශක්ති ප්රභවය | රැහැන්ගත විදුලි |
වගකීම් සහ සහාය
For detailed warranty information, please refer to the warranty card included with your purchase or visit the official RCF website. For technical support, product registration, or service inquiries, please contact RCF customer support directly through their official channels.
RCF Official Webඅඩවිය: www.rcf.it
