Tektronix T912 10 MHz ගබඩා Oscilloscope උපදෙස් අත්පොත

හැඳින්වීම

This document serves as the official instruction manual for the Tektronix T912 10 MHz Storage Oscilloscope. It provides comprehensive information regarding the setup, operation, maintenance, and troubleshooting of the instrument. Users are advised to read this manual thoroughly to ensure safe and efficient use of the Tektronix T912 oscilloscope.

ආරක්ෂිත තොරතුරු

Always observe the following safety precautions when operating the Tektronix T912 oscilloscope:

• බලශක්ති ප්රභවය: Connect the instrument only to a power source with the specified voltage and frequency. Ensure proper grounding.
• වාතාශ්රය: Do not block ventilation openings. Adequate airflow is essential to prevent overheating.
• පාරිසරික තත්ත්වයන්: Operate the oscilloscope in a dry environment, away from moisture, dust, and extreme temperatures.
• Probes and Cables: Use only probes and cables designed for the instrument and rated for the voltages being measured.
• සේවා: Refer all servicing to qualified service personnel. Do not attempt to open or repair the instrument yourself.
• ඉහළ වෙළුමtage: අධි පරිමාව ගැන දැනුවත් වන්නtage hazards. Always disconnect power before making or changing connections, especially when dealing with high voltagඊ පරිපථ.

නිෂ්පාදනය අවසන්view: The Instruction Manual

මෙම කොටස වැඩි කාලයක් ලබා දෙයිview of the physical instruction manual itself, which guides users through the operation of the Tektronix T912 10 MHz Storage Oscilloscope.

Figure 1: Front Cover of the Instruction Manual. This image displays the blue front cover of the Tektronix T912 10 MHz Storage Oscilloscope Instruction Manual. The Tektronix logo is prominently featured at the top, with "T912 10 MHz STORAGE OSCILLOSCOPE WITH OPTIONS" and "INSTRUCTION MANUAL" printed below. The manual is spiral-bound on the left side.

Figure 2: Inside Cover Page of the Instruction Manual. This image shows the inside cover page of the manual. It features the Tektronix logo with "COMMITTED TO EXCELLENCE" below it. Text prompts the user to "PLEASE CHECK FOR CHANGE INFORMATION AT THE REAR OF THIS MANUAL." Details about the T912 model, storage oscilloscope, and instruction manual are visible, along with Tektronix Inc. contact information, product group, serial number, and printing dates (First Printing JUL 1975, Revised JUL 1982).

Figure 3: Back Cover of the Instruction Manual. This image displays the plain blue back cover of the spiral-bound instruction manual. It matches the front cover's color and texture, showing the spiral binding along the left edge.

සැලසුම

Proper setup is crucial for accurate measurements and safe operation. Follow these general steps:

1. ඇසිරීම: Carefully remove the oscilloscope and all accessories from its packaging. Inspect for any signs of shipping damage.
2. ස්ථානගත කිරීම: Place the oscilloscope on a stable, level surface with adequate ventilation space around it.
3. බල සම්බන්ධතාවය: Connect the power cord to the instrument and then to a grounded AC power outlet matching the specified voltage.
4. පරීක්ෂණ සම්බන්ධතාවය: Connect the desired probes to the input channels. Ensure probes are properly compensated before use.
5. මූලික බලය සක්‍රිය කිරීම: Turn on the oscilloscope and allow it to warm up for a few minutes as per the specific instructions in the full manual.

මෙහෙයුම් උපදෙස්

The Tektronix T912 is a 10 MHz storage oscilloscope designed for capturing and displaying waveforms. Basic operation involves:

• බලය සක්රිය / අක්රිය: Use the main power switch to turn the unit on or off.
• සිරස් පාලනයන්: Adjust the VOLTS/DIV knob for each channel to set the vertical sensitivity. Use the POSITION knob to move the waveform vertically.
• තිරස් පාලන: Adjust the SEC/DIV knob to set the time base. Use the POSITION knob to move the waveform horizontally.
• අවුලුවන: Set the TRIGGER LEVEL and SOURCE to stabilize the waveform display. The T912, being a storage oscilloscope, allows for capturing single-shot events.
• ගබඩා කාර්යය: Utilize the storage controls to capture and hold transient or non-repetitive waveforms on the screen for detailed analysis. Refer to the full manual for specific storage mode operations.
• Focus and Intensity: Adjust these controls for a clear and bright display.

නඩත්තු කිරීම

Regular maintenance ensures the longevity and performance of your oscilloscope:

• පිරිසිදු කිරීම: පිරිසිදු කිරීමට පෙර විදුලිය විසන්ධි කරන්න. මෘදු, d ස්විචයක් භාවිතා කරන්න.amp cloth with a mild detergent to clean the exterior. Avoid abrasive cleaners or solvents.
• ගබඩා: When not in use, store the oscilloscope in a clean, dry environment, protected from dust and extreme temperatures.
• ක්රමාංකනය: Periodically, the oscilloscope may require calibration to maintain accuracy. Refer to the detailed calibration procedures in the complete service manual or contact qualified service personnel.
• පරීක්ෂණ සත්කාර: Inspect probes regularly for damage. Keep probe tips clean.

දෝෂගවේෂණය

If you encounter issues with your Tektronix T912, consider the following common troubleshooting steps:

• සංදර්ශකය නැත:
  • බල සම්බන්ධතාවය සහ ෆියුස් පරීක්ෂා කරන්න.
  • Ensure intensity and focus controls are not set to minimum.
  • Verify that the oscilloscope is powered on.
• අස්ථායී තරංග ආකාරය:
  • Adjust the trigger level and source settings.
  • Check probe connections and compensation.
  • Ensure the input signal is within the oscilloscope's measurement range.
• සංඥාවක් නොපෙන්වයි:
  • Verify the input signal is present at the probe tip.
  • Check channel selection and vertical position.
  • Ensure the probe is correctly connected to the circuit under test.
• විකෘති තරංග ආකාරය:
  • Check probe compensation.
  • Ensure the signal amplitude does not exceed the vertical range.
  • Verify the signal frequency is within the oscilloscope's bandwidth.

For more detailed troubleshooting, consult the complete instruction manual or contact Tektronix support.

පිරිවිතර

The following specifications apply to the Tektronix T912 10 MHz Storage Oscilloscope:

Note: Some specifications like "Compatible Devices" and "Graphics Card Interface" are derived from the product listing and may refer to specific configurations or accessories. For detailed technical specifications, refer to the original Tektronix T912 service manual.

වගකීම් සහ සහාය

For warranty information, please refer to the documentation provided at the time of purchase or contact the seller (ROA) or the manufacturer (Tektronix) directly. Support resources, including technical assistance and service options, can typically be found on the official Tektronix webවෙබ් අඩවියෙන් හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුව අමතා.

ටෙක්ට්‍රොනික්ස්, ඉන්කෝපරේටඩ්
තැ.පෙ. 500
බීවර්ටන්, ඔරිගන් 97077

First Printing JUL 1975
Revised JUL 1982