ස්ට්‍රයිමන් වොලන්ට් චුම්බක දෝංකාර යන්ත්‍ර උපදෙස් අත්පොත

1. හැඳින්වීම

The Strymon Volante is a magnetic echo machine designed to deliver a wide range of vintage delay effects. It features three distinct echo engines: Drum echo, Tape echo, and Reel-to-Reel studio echo, along with a Sound on Sound looper mode and an onboard spring reverb. This pedal is suitable for electric and acoustic guitars, synthesizers, vocals, and keyboards, offering extensive control over delay parameters and sonic characteristics.

2 ආරක්ෂිත තොරතුරු

• බල සැපයුම: Use only the specified 9V DC power supply with the correct polarity. Using an incorrect power supply can damage the unit and void the warranty.
• ජලය සහ තෙතමනය: Do not expose the unit to water or excessive moisture. This can cause electric shock or fire.
• වාතාශ්රය: ඒකකය වටා නිසි වාතාශ්‍රය සහතික කරන්න. වාතාශ්‍රය විවරයන් අවහිර නොකරන්න.
• පිරිසිදු කිරීම: මෘදු වියළි රෙද්දකින් ඒකකය පිරිසිදු කරන්න. දියර පිරිසිදු කරන්නන් හෝ එයරොසෝල් භාවිතා නොකරන්න.
• සේවා: ඒකකයට ඔබම සේවා සැපයීමට උත්සාහ නොකරන්න. සියලුම සේවා සුදුසුකම් ලත් සේවා නිලධාරීන් වෙත යොමු කරන්න.

3. පැකේජ අන්තර්ගතය

Upon opening the box, verify that the following items are included:

• Strymon Volante Magnetic Echo Machine pedal
• 9V DC Power Supply (specific to region)
• USB කේබලය
• ඉක්මන් ආරම්භක මාර්ගෝපදේශය (මෙම අත්පොත සවිස්තරාත්මක උපදෙස් සපයයි)

4. නිෂ්පාදන අවසන්view සහ පාලන

The Volante pedal features a comprehensive set of controls for shaping your echo sounds. Familiarize yourself with the layout below.

රූපය 4.1: ඉහළ view of the Strymon Volante pedal, showing all knobs, switches, and footswitches.

ඉහළ පැනල් පාලන:

• REC LEVEL: Adjusts the input gain for the echo signal. Higher settings introduce more saturation.
• අඩු කප්පාදුව: Filters out low frequencies from the echo repeats.
• MECHANICS: Controls the mechanical integrity of the virtual echo machine, affecting wow, flutter, and other imperfections.
• අඳින්න: Simulates the degradation of the magnetic medium, adding warmth and character to the repeats.
• TyPE ස්විචය: Selects between Drum, Tape, and Studio echo engines.
• වේග ස්විචය: Adjusts the playback speed of the echo, affecting delay time (Half, Normal, Double).
• පුනරාවර්තන: Controls the number of echo repeats.
• echo මට්ටම: Adjusts the overall volume of the echo repeats.
• උල්පත්: Controls the level of the onboard spring reverb.
• TIME Playback/Feedback LEDs (1-4): Indicate active playback and feedback heads.
• SPACING Switch: Adjusts the spacing between the virtual playback heads (Even, Triplet, Golden, Silver).

පා මාරු:

• ON (Left Footswitch): Toggles the effect on/off. Hold for Reverse.
• FAVORITE (Middle Footswitch): Recalls a saved preset. Hold for Pause (in Sound on Sound mode).
• TAP (Right Footswitch): Taps in the delay tempo. Hold for Splice (in Sound on Sound mode).

රූපය 4.2: Rear panel connections of the Strymon Volante, including audio inputs/outputs, expression pedal, USB, MIDI, and power input.

පසුපස පැනල් සම්බන්ධතා:

• INST/LINE Switch: Selects input level for instrument or line level signals.
• LEFT IN / RIGHT IN: Mono or stereo audio inputs.
• LEFT OUT / RIGHT OUT: Stereo audio outputs.
• EXP: Expression pedal input for real-time control of parameters.
• USB: USB connection for firmware updates and MIDI control.
• MIDI IN / MIDI OUT: Standard MIDI connections for advanced control and synchronization.
• 9VDC: Power input for the included 9V DC power supply.

5. පිහිටුවීම

5.1 බල සම්බන්ධතාවය

1. Ensure the Volante is switched off (if applicable) and all audio connections are made before connecting power.
2. Connect the included 9V DC power supply to the 9VDC input on the rear panel.
3. Plug the power supply into a suitable wall outlet.

5.2 ශ්‍රව්‍ය සම්බන්ධතා

The Volante supports both mono and stereo operation.

• මොනෝ සැකසුම: ඔබේ උපකරණය සම්බන්ධ කරන්න LEFT IN ජැක්. සම්බන්ධ කරන්න පිටව ගියේය ජැක් ඔබේ ampලිෆයර් හෝ ඊළඟ පැඩලය.
• ස්ටීරියෝ සැකසුම: Connect your stereo source (e.g., another stereo pedal, synth) to the LEFT IN සහ RIGHT IN jacks. Connect the පිටව ගියේය සහ හරි එලියට jacks to your stereo amplifier setup or audio interface.
• ආදාන මට්ටම: භාවිතා කරන්න INST/LINE switch to match your input signal level. Set to INST for guitar/bass, and රේඛාව for synthesizers or effects loops.

5.3 MIDI and USB Connections (Optional)

• MIDI: Connect MIDI cables from your MIDI controller or interface to the MIDI IN සහ මිඩි අවුට් jacks for advanced control, preset changes, and synchronization.
• USB: Connect a USB cable from the Volante to your computer for firmware updates and MIDI over USB functionality.

6. මෙහෙයුම් උපදෙස්

6.1 මූලික මෙහෙයුම

1. බලපෑම යොදන්න: ඔබන්න ON footswitch to activate the delay effect. The LED above the footswitch will illuminate.
2. Select Echo Type: භාවිතා කරන්න TYPE switch to choose between Drum, Tape, or Studio echo.
3. ප්‍රමාද කාලය සකසන්න: The delay time is primarily controlled by the තට්ටු කරන්න footswitch. Tap it two or more times to set the tempo. The වේගය switch (Half, Normal, Double) further divides or multiplies the tapped tempo.
4. Control Repeats: හරවන්න පුනරාවර්තන knob to increase or decrease the number of echo repetitions.
5. Set Echo Level: භාවිතා කරන්න ECHO මට්ටම knob to blend the wet (effected) signal with your dry signal.
6. Add Spring Reverb: සකස් කරන්න වසන්තය knob to introduce the onboard spring reverb.

6.2 Shaping the Echo Tone

• REC LEVEL: For clean echoes, keep this knob lower. Increase it to introduce natural saturation and soft clipping characteristic of magnetic media.
• අඩු කප්පාදුව: Use this to remove muddy low frequencies from your repeats, making them clearer and less intrusive.
• MECHANICS & WEAR: These knobs allow you to dial in the imperfections and character of vintage echo machines. Experiment with them to achieve desired vintage textures.
• පරතරය: ද පරතරය switch alters the rhythmic relationship between the four virtual playback heads.
  • පවා: Heads are equally spaced.
  • Triplet: Creates triplet-based rhythms.
  • Golden: Asymmetrical spacing for unique rhythmic patterns.
  • රිදී: Another asymmetrical spacing option.

6.3 Sound on Sound Looper Mode

The Volante features a mono Sound on Sound looper mode, inspired by classic tape looping techniques.

1. Engage Looper: අල්ලාගෙන සිටින්න තට්ටු කරන්න footswitch for approximately 1 second until the LED above it flashes. This enters Sound on Sound mode.
2. වාර්තාව: The looper automatically starts recording when engaged. Play your phrase.
3. වැඩිපුර ඩබ්: After the initial loop is recorded, the looper automatically enters overdub mode. Play additional layers.
4. නවත්වන්න/පැහැදිලි කරන්න: ඔබන්න ON footswitch to stop playback. Hold the ON footswitch to clear the loop.
5. විරාමය: In Sound on Sound mode, hold the ප්රියතම footswitch to pause the loop.
6. ස්ප්ලයිස්: In Sound on Sound mode, hold the තට්ටු කරන්න footswitch to splice the loop, creating a new loop point.
7. ආපසු: While the loop is playing, hold the ON footswitch to reverse the loop playback.

පෙරසිටර 6.4 ක්

The Volante allows you to save and recall your favorite settings.

• පෙරසිටුවක් සුරැකීම: Once you have dialed in your desired sound, press and hold the ප්රියතම footswitch until its LED flashes, then release. Your current settings are now saved to the Favorite preset.
• පෙර සැකසුමක් සිහිපත් කිරීම: ඔබන්න ප්රියතම footswitch to instantly recall your saved preset.
• සටහන: The Volante supports up to 300 presets via MIDI, but only one "Favorite" preset is directly accessible via the footswitch.

7. උසස් විශේෂාංග

7.1 Expression Pedal Control

Connect a standard expression pedal to the EXP jack to control various parameters in real-time. The specific parameter controlled can be configured via secondary functions or MIDI.

7.2 MIDI Implementation

The Volante offers extensive MIDI control for integration into complex setups.

• MIDI Control Change (CC): Most knobs and switches can be controlled via MIDI CC messages.
• වැඩසටහන් වෙනස් කිරීම (PC): Access up to 300 presets using MIDI Program Change messages.
• MIDI Clock Sync: Synchronize the delay tempo with external MIDI clock sources.
• Refer to the full MIDI Implementation Chart available on the Strymon webසවිස්තරාත්මක තොරතුරු සඳහා අඩවිය.

8. නඩත්තු කිරීම

• පිරිසිදු කිරීම: Wipe the pedal with a soft, dry cloth to remove dust and grime. Avoid abrasive cleaners or solvents.
• ගබඩා: භාවිතයේ නොමැති විට සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව සිසිල් වියළි ස්ථානයක පෙඩලය ගබඩා කරන්න.
• ස්ථිරාංග යාවත්කාලීන කිරීම්: Periodically check the Strymon website for firmware updates. Updates can introduce new features or improve performance. Use the USB connection and the Strymon Updater software to perform updates.

9. දෝශ නිරාකරණය

10. පිරිවිතර

11. වගකීම් සහ සහාය

11.1 වගකීම් තොරතුරු

Strymon products are designed and built to high standards. For detailed warranty information, including coverage period and terms, please refer to the official Strymon webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සහාය අමතන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

11.2 පාරිභෝගික සහාය

If you encounter any issues not covered in this manual or require further assistance, please visit the official Strymon support page or contact their customer service team. You can typically find contact information and FAQs on the Strymon webඅඩවිය.

Strymon Webඅඩවිය: www.strymon.net