Bingfu Vehicle Ham Mobile Radio Antenna Instruction Manual

හැඳින්වීම

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Bingfu Vehicle Ham Mobile Radio Antenna. This antenna is designed for vehicle-mounted applications, supporting VHF (136-174MHz) and UHF (400-470MHz) frequency ranges, making it suitable for various amateur and two-way radio systems.

The package includes the antenna, a 5-meter (16.5 feet) RG58 coaxial cable, and a lip mount fixed bracket with necessary tools for installation.

රූපය: අවසන්view of the Bingfu Vehicle Ham Mobile Radio Antenna components, showing the antenna unit, coaxial cable, and the lip mount bracket with included tools.

සැකසුම සහ ස්ථාපනය

Proper installation is crucial for optimal performance and longevity of your antenna. The antenna utilizes a lip mount fixed bracket, designed for secure attachment to vehicle surfaces without drilling.

පැකේජයේ අන්තර්ගතය:

• 1 x Antenna Unit
• 1 x RG58 Coaxial Cable (5m / 16.5 feet) with PL259 Male Connectors
• 1 x Lip Mount Fixed Bracket
• 1 x Hexagon Wrench (for bracket adjustment)
• 1 x Silicon Rubber Gasket
• 1 x Aluminium Gasket

ස්ථාපන පියවර:

1. සවිකරන ස්ථානය තෝරන්න: Select a suitable location on your vehicle, such as a trunk lid, hood edge, or hatchback lip. Ensure the location allows the antenna to be clear of obstructions and provides a stable mounting surface.
2. Assemble the Bracket: The lip mount bracket consists of several parts. Refer to the mounting instruction image for assembly. The UHF SO239 female connector on the bracket will receive the antenna.

Image: Step-by-step diagram illustrating how to assemble the lip mount bracket and attach the antenna base.
3. Protect Vehicle Surface: cl ට පෙරamping the bracket, place either the silicon rubber gasket or the aluminium gasket between the bracket and your vehicle's paintwork. This helps protect the vehicle surface from scratches and provides a more secure grip.


Image: Illustration demonstrating the use of silicon rubber and aluminium gaskets to protect the vehicle's surface when installing the antenna bracket.

4. වරහන සුරක්ෂිත කරන්න: Use the provided hexagon wrench to tighten the screws on the lip mount bracket, securing it firmly to the chosen vehicle surface. Ensure it is tight enough to prevent movement but do not overtighten to avoid damage.
5. ඇන්ටෙනාව අමුණන්න: Screw the antenna unit onto the UHF SO239 female connector on the mounted bracket. Hand-tighten until snug.
6. කොක්සියල් කේබලය සම්බන්ධ කරන්න: Connect one end of the RG58 coaxial cable (PL259 male connector) to the corresponding PL259 male connector on the antenna bracket. Route the cable neatly and securely into the vehicle, avoiding sharp bends or areas where it could be pinched or damaged.
7. ගුවන් විදුලියට සම්බන්ධ වන්න: Connect the other end of the RG58 coaxial cable to your mobile radio's antenna input.


Image: The Bingfu Vehicle Ham Mobile Radio Antenna shown installed on the lip of a vehicle's trunk, demonstrating a typical mounting position.

මෙහෙයුම

Once properly installed, the Bingfu Vehicle Ham Mobile Radio Antenna operates passively, requiring no direct user interaction beyond its initial setup. Its primary function is to convert radio frequency signals into electrical signals for your radio receiver and vice-versa for transmission.

භාවිත මාර්ගෝපදේශ:

• සංඛ්යාත අනුකූලතාව: Ensure your radio operates within the antenna's specified frequency ranges: VHF 136-174MHz and UHF 400-470MHz.
• SWR පරීක්ෂාව: For optimal performance and to prevent damage to your radio, it is recommended to check the Standing Wave Ratio (SWR) after installation, especially if you are using a high-power transmitter. An SWR meter can be used for this purpose. The antenna is designed for a VSWR of <2.0.
• පාරිසරික සලකා බැලීම්: While designed for outdoor vehicle use, avoid exposing the antenna to extreme physical impacts or prolonged submersion in water.
• කේබල් කළමනාකරණය: Ensure the coaxial cable is not kinked, pinched, or excessively bent, as this can degrade signal quality.

නඩත්තු කිරීම

Regular maintenance helps ensure the longevity and consistent performance of your Bingfu antenna.

• පිරිසිදු කිරීම: Periodically clean the antenna and mounting bracket with a soft, damp අපිරිසිදු, දූවිලි සහ මාර්ග දූවිලි ඉවත් කිරීමට රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක භාවිතා කිරීමෙන් වළකින්න.
• සම්බන්ධතා පරීක්ෂාව: Annually, or if you notice a degradation in signal quality, inspect all connections (antenna to bracket, cable to bracket, cable to radio) to ensure they are secure and free from corrosion.
• කේබල් පරීක්ෂාව: Check the coaxial cable for any signs of wear, cuts, or damage. Ensure it is still securely routed and not exposed to excessive friction or heat.
• Bracket Security: Verify that the lip mount bracket remains firmly attached to your vehicle. Re-tighten screws if necessary, but do not overtighten.

දෝෂගවේෂණය

If you experience issues with your antenna, consider the following common troubleshooting steps:

පිරිවිතර

Detailed technical specifications for the Bingfu Vehicle Ham Mobile Radio Antenna:

රූපය: විස්තරාත්මක view of the antenna unit, highlighting its dimensions, the low-loss RG58 cable, and the UHF PL259 male connector.

වගකීම් සහ සහාය

For specific warranty information regarding your Bingfu Vehicle Ham Mobile Radio Antenna, please refer to the documentation provided at the time of purchase or contact the manufacturer directly. Bingfu is committed to offering timely technical advice and efficient after-sales service.

You can typically find support contact information on the official Bingfu webඅඩවියෙන් හෝ ඔබේ සිල්ලර වෙළෙන්දා හරහා.

Note: Optional protection plans may be available for purchase separately and are not part of the standard product warranty.