උපදෙස් අත්පොත

නිෂ්පාදනය අවසන්view

The Unity Automotive 11725 Front Left Complete Strut Assembly is engineered to provide a hassle-free solution for replacing your vehicle's suspension. This preassembled unit includes all necessary components, such as the top mount, bearing plate, bumper, insulators, and coil spring, eliminating the need for specialized tools during installation. It is designed to restore your vehicle's factory ride height and ensure a stable, comfortable ride.

Unity Automotive has over 50 years of experience in manufacturing high-quality aftermarket automotive parts, focusing on durability and reliability.

ප්රධාන ලක්ෂණ

• Preassembled Design: Includes top mount, bearing plate, bumper, insulators, and coil spring for a complete unit.
• Restores Ride Quality: Engineered to restore factory ride height and provide a stable, comfortable driving experience.
• Trouble-Free Installation: Designed for superior fit and eliminates the need for specialty tools.
• Hassle-Free Repair: All new components ensure a straightforward replacement process.
• වාහන විශේෂිත ගැළපුම: Ensures precise compatibility with specified vehicle models.

පැකේජයේ අන්තර්ගතය

Upon opening the package, you will find the following item:

• (1) Unity Automotive 11725 Front Left Complete Strut Assembly

වාහන අනුකූලතාව

This Unity Automotive 11725 Front Left Complete Strut Assembly is compatible with the following vehicle:

• සාදන්න: ඩොජ්
• ආකෘතිය: ඩාර්ට්
• වසර: 2013-2016
• තනතුර: Front Driver Side (Left)

සවි සටහන: මෙම කොටස බැහැර කරයි SE, SXT, and Rallye Models of the Dodge Dart.

ස්ථාපන මාර්ගෝපදේශය

වැදගත් ආරක්ෂක තොරතුරු: Installation of automotive suspension components should only be performed by qualified individuals with proper tools and safety equipment. Failure to follow proper procedures can result in serious injury or damage to the vehicle. Always consult a professional mechanic if you are unsure about any step.

අවශ්‍ය මෙවලම් (සාමාන්‍ය):

• Vehicle Jack and Jack Stands
• රෝද චොක්ස්
• සොකට් රෙන්ච් සෙට්
• ව්යවර්ථ යතුර
• විනිවිද යන තෙල්
• ආරක්ෂිත වීදුරු සහ අත්වැසුම්

සාමාන්ය ස්ථාපන පියවර:

1. වාහනය සූදානම් කරන්න: Park the vehicle on a level surface, engage the parking brake, and chock the rear wheels. Loosen the lug nuts on the front left wheel.
2. එසවුම් වාහනය: Safely lift the front of the vehicle using a jack and secure it with jack stands. Remove the front left wheel.
3. සංරචක විසන්ධි කරන්න: Locate the existing strut assembly. Disconnect any brake lines, ABS sensor wires, or sway bar links attached to the strut.
4. Remove Old Strut: Unbolt the lower mounting bolts connecting the strut to the steering knuckle. Then, unbolt the upper mounting nuts from the strut tower under the hood. Carefully remove the old strut assembly from the vehicle.
5. නව ස්ට්‍රට් ස්ථාපනය කරන්න: Position the new Unity Automotive 11725 complete strut assembly into the strut tower. Secure the upper mounting nuts, but do not fully tighten yet.
6. Connect Lower Mount: Align the lower mounting holes of the new strut with the steering knuckle. Insert and hand-tighten the lower mounting bolts.
7. සංරචක නැවත සම්බන්ධ කරන්න: Reattach any brake lines, ABS sensor wires, and sway bar links that were disconnected.
8. ව්යවර්ථ ගාංචු: Refer to your vehicle's service manual for specific torque specifications. Fully tighten all upper and lower mounting bolts/nuts to the manufacturer's recommended torque.
9. රෝදය නැවත ස්ථාපනය කරන්න: Reinstall the front left wheel and hand-tighten the lug nuts.
10. පහළ වාහනය: Safely lower the vehicle to the ground. Fully tighten the lug nuts to the manufacturer's specifications.
11. අවසාන පරීක්ෂාව: After installation, it is highly recommended to have a professional alignment performed to ensure proper vehicle handling and tire wear.

Image: The Unity Automotive 11725 Front Left Complete Strut Assembly, showing the integrated coil spring, strut body, and mounting points. This preassembled unit simplifies the installation process by including all necessary components.

නඩත්තු කිරීම සහ රැකවරණය

The Unity Automotive 11725 Complete Strut Assembly is designed for long-lasting reliability and typically requires minimal maintenance after proper installation. However, regular vehicle inspections are recommended to ensure optimal performance and safety.

• නිතිපතා පරීක්ෂා කිරීම්: Periodically inspect the strut assembly for any signs of damage, leaks, or excessive wear. Check the rubber boots for cracks and ensure all mounting bolts remain tight.
• පෙළගැස්ම: After replacing any suspension component, it is crucial to have a professional wheel alignment performed. This ensures correct steering, handling, and prevents premature tire wear.
• පිරිසිදු කිරීම: Keep the strut assembly free from excessive dirt, salt, and debris, especially in harsh weather conditions. A simple rinse with water during vehicle washing is usually sufficient.
• අධික බර පැටවීමෙන් වළකින්න: Do not exceed your vehicle's Gross Vehicle Weight Rating (GVWR) as this can put undue stress on suspension components, including the strut assembly.

පොදු ගැටළු දෝශ නිරාකරණය කිරීම

If you experience any issues after installing your new strut assembly, consider the following common problems and their potential solutions. Always consult a certified mechanic for complex issues or if you are unsure.

නිෂ්පාදන පිරිවිතර

ආරක්ෂිත තොරතුරු

Always prioritize safety when working on your vehicle's suspension system. Improper installation or handling can lead to serious injury or vehicle damage.

• වෘත්තීය ස්ථාපනය නිර්දේශ කෙරේ: If you are not experienced with automotive repairs, it is highly recommended to have this part installed by a certified professional mechanic.
• නිසි මෙවලම් භාවිතා කරන්න: Always use appropriate and well-maintained tools for the job, including a reliable jack, sturdy jack stands, and a torque wrench.
• පුද්ගලික ආරක්ෂක උපකරණ: Wear safety glasses, gloves, and appropriate work attire to protect yourself from potential hazards.
• වාහන ස්ථායිතාව: Ensure the vehicle is securely supported on jack stands before beginning any work underneath. Never rely solely on a jack.
• ව්යවර්ථ පිරිවිතර: Always tighten fasteners to the vehicle manufacturer's specified torque settings. Overtightening or undertightening can lead to component failure.
• යෝජනාව 65 අවවාදයයි: මෙම නිෂ්පාදනයේ පිළිකා, උපත් ආබාධ හෝ වෙනත් ප්‍රජනක හානි ඇති කිරීමට කැලිෆෝනියා ප්‍රාන්තය දන්නා රසායනික ද්‍රව්‍ය අඩංගු විය හැක. හැසිරවීමෙන් පසු අත් සෝදන්න.

වගකීම් සහ සහාය

For information regarding the warranty of your Unity Automotive 11725 Front Left Complete Strut Assembly, please refer to the documentation included with your purchase or visit the official Unity Automotive website. For technical support or assistance with installation, please contact Unity Automotive customer service directly.

සබඳතා තොරතුරු: කරුණාකර නිෂ්පාදකයාගේ නිලධාරියා වෙත යොමු වන්න. website or product packaging for the most current contact details for customer support.