SECUKEY SF2 Biometric and PIN Access Control System User Manual

1. හැඳින්වීම

Thank you for choosing the SECUKEY SF2 Biometric and PIN Access Control System. This device is designed to provide secure and reliable access management for various environments, featuring advanced biometric fingerprint recognition and PIN code entry. Its robust, anti-vandal design and IP66 rating make it suitable for outdoor installations. This manual provides essential information for the proper installation, configuration, operation, and maintenance of your SF2 system. Please read it thoroughly before use.

ප්රධාන ලක්ෂණ

• Optical Biometric Fingerprint Reader with 500DPI resolution.
• Fast Identification Time: Approximately 1 second.
• User Capacity: Up to 3,000 users (1,000 fingerprint users, 2,000 PIN users).
• Two "Authorizer" users for enabling/disabling other users.
• IP66 Rated for Outdoor Protection: Resistant to dust and powerful water jets.
• Anti-Vandal Zinc Alloy Casing.
• Programmable Relay Output (NO, NC, Common) with adjustable time (1-99 seconds, default 5 seconds).
• Access Modes: Fingerprint, PIN code, or Card (Wiegand 26-44 bit output).
• Wiegand 26-44 bit output for integration with external controllers (e.g., SBOARD, SBOARD-II).
• Interlock Functionality: Manage two doors with two SF2 devices.
• Operating Temperature Range: -30°C to 60°C (-22°F to 140°F).
• ආර්ද්‍රතා පරාසය: 10%RH සිට 99%RH දක්වා.
• Power Supply: 12-24V AC/DC.

2 ආරක්ෂිත තොරතුරු

• ස්ථාපනය කිරීමට හෝ නඩත්තු කිරීමට පෙර බල සැපයුම විසන්ධි කර ඇති බවට සහතික වන්න.
• නිශ්චිත බල සැපයුම (12-24V AC/DC) පමණක් භාවිතා කරන්න.
• Do not expose the device to extreme temperatures outside the specified operating range.
• උපාංගයේ සැර රසායනික ද්‍රව්‍ය හෝ උල්ෙල්ඛ පිරිසිදුකාරක භාවිතා කිරීමෙන් වළකින්න.
• Installation should be performed by qualified personnel to ensure proper wiring and functionality.
• ප්‍රශස්ත ක්‍රියාකාරිත්වය සඳහා ඇඟිලි සලකුණු සංවේදකය පිරිසිදුව හා වියලිව තබා ගන්න.

3. නිෂ්පාදන අවසන්view

3.1 ඉදිරිපස View

3.2 ආපසු View සහ සම්බන්ධතා

3.3 භෞතික ලක්ෂණ

• Anti-Vandal Design: The SF2 features a robust metal casing designed to withstand tampering and physical impact, ensuring durability in challenging environments.

  

• IP66 ජල ආරක්ෂිත ශ්‍රේණිගත කිරීම: This rating ensures the device is protected against dust ingress and powerful water jets, making it suitable for outdoor installation without concern for weather conditions.

  

• මෙහෙයුම් උෂ්ණත්වය: The device is designed to operate reliably across a wide temperature range, from -30°C (default) to 60°C. An optional -40°C operating temperature may be available depending on the specific model variant.
• Higher Security PIN: The system supports a feature allowing users to hide their correct PIN within a longer sequence of numbers (up to 10 digits) for enhanced security against shoulder surfing. For example, if the PIN is 245689, a user could input **245689** or *245689***.

4. ස්ථාපනය

4.1 සවි කිරීම

The SECUKEY SF2 should be mounted on a flat, stable surface at an appropriate height for user access. Ensure the mounting location is secure and allows for proper cable routing. Use appropriate screws and anchors for the wall material.

4.2 රැහැන්

The SF2 supports two primary working modes: standalone and as a slave reader. Proper wiring is crucial for correct operation. Refer to the detailed wiring diagram provided in the product packaging or the manufacturer's official documentation for specific connections.

ස්වාධීන මාදිලිය: In this mode, the SF2 directly controls the lock, door sensor, and exit button. It acts as a complete access control unit.

Slave Reader Mode: When operating as a slave reader, the SF2 connects to an external access control panel (controller) via Wiegand 26-44 bit output. The controller then manages the lock and other peripherals.

Ensure all connections are secure and insulated. Incorrect wiring can damage the device or connected components.

5. පිහිටුවීම

5.1 ආරම්භක බල-අප්

1. After completing all wiring, connect the power supply (12-24V AC/DC).
2. The device will power on and perform a self-test.
3. The default administrator PIN is typically 123456 (refer to specific product documentation for confirmation).

5.2 පරිශීලක කළමනාකරණය

The SF2 allows for the registration of up to 3,000 users, including 1,000 fingerprint users and 2,000 PIN users. It also supports two "Authorizer" users who can enable or disable other users.

පරිපාලකයෙකු එකතු කිරීම

Follow the on-screen prompts or refer to the detailed programming guide to set up the initial administrator PIN and/or fingerprint. This is crucial for managing other users and system settings.

ඇඟිලි සලකුණු ලියාපදිංචි කිරීම

1. Enter administrator mode.
2. Select the option to add a new fingerprint user.
3. Place the user's finger on the sensor multiple times as instructed to ensure accurate registration.
4. Assign a user ID to the registered fingerprint.

Registering PIN Codes

1. Enter administrator mode.
2. Select the option to add a new PIN user.
3. Enter the desired PIN code (typically 4-6 digits) and confirm it.
4. Assign a user ID to the registered PIN.

Authorizer Users

The SF2 supports two special "Authorizer" users. These users have the unique ability to enable or disable other standard users without full administrator privileges. This feature is useful for delegated management of user access.

6. මෙහෙයුම් උපදෙස්

6.1 Access Modes

The SECUKEY SF2 offers multiple ways for authorized users to gain access:

• ඇඟිලි සලකුණු ප්‍රවේශය: Place a registered finger on the optical sensor. The system will verify the fingerprint and grant access if authorized.
• PIN කේත ප්‍රවේශය: Enter your registered PIN code on the keypad, followed by the '#' key. For enhanced security, you can embed your PIN within a longer sequence of numbers (e.g., if PIN is 1234, you can enter 987123456#).
• Card Access (Wiegand): If configured with an external Wiegand card reader, present your authorized RFID card to the reader. The SF2 will output the Wiegand data to the controller for verification.

6.2 Interlock Function

When two SF2 devices are installed, they can be configured to manage an interlock system between two doors. This ensures that the second door cannot be opened until the first door is securely closed, enhancing security in sensitive areas. Refer to the advanced programming guide for interlock setup instructions.

7. නඩත්තු කිරීම

• පිරිසිදු කිරීම: Regularly wipe the fingerprint sensor and keypad with a soft, dry, lint-free cloth. Do not use abrasive materials or chemical cleaners.
• ස්ථිරාංග යාවත්කාලීන කිරීම්: නිෂ්පාදකයා පරීක්ෂා කරන්න webප්‍රශස්ත කාර්ය සාධනය සහ ආරක්ෂාව සහතික කිරීම සඳහා පවතින ඕනෑම ස්ථිරාංග යාවත්කාලීන කිරීම් සඳහා වරින් වර වෙබ් අඩවිය පරීක්ෂා කරන්න.
• User Database Management: නිතිපතා නැවතview and update the user database, removing access for terminated personnel or adding new users as required.
• බල සැපයුම් පරීක්ෂාව: බල සැපයුම ස්ථායී බවත් නිශ්චිත පරිමාව තුළ ඇති බවත් සහතික කර ගන්න.tage පරාසය (12-24V AC/DC).

8. දෝශ නිරාකරණය

9. පිරිවිතර

10. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official SECUKEY webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

Information regarding spare parts availability and software updates is not explicitly provided in the product details. Please contact SECUKEY customer service for the most current information.