1. හැඳින්වීම
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your GBC ShredMaster PX10-06 Super Cross-Cut Shredder. Please read this manual thoroughly before using the shredder and retain it for future reference.
The GBC ShredMaster PX10-06 is designed for home office use, providing P-4 level confidential security by shredding documents into 3/16" x 1 1/2" super cross-cut pieces. It can shred up to 10 sheets of paper simultaneously and features a 6-gallon waste bin.

රූපය 1.1: ඉදිරිපස view of the GBC ShredMaster PX10-06 Home Office Shredder.

Image 1.2: Illustration of the Super Cross-Cut (P-4) security level, showing shredded paper size compared to a coin.
2. වැදගත් ආරක්ෂක තොරතුරු
තුවාල හෝ හානි අවදානම අවම කිරීම සඳහා, පහත සඳහන් ආරක්ෂක පියවරයන් නිරීක්ෂණය කරන්න:
- ලිහිල් ඇඳුම්, ආභරණ, හිසකෙස් සහ අත් කඩදාසි ඇතුල් කිරීමේ ස්ථානයෙන් ඈත් කර තබන්න.
- ඉරීමේ යන්ත්රය අසල ළමයින්ට හෝ සුරතල් සතුන්ට ඉඩ නොදෙන්න.
- අපද්රව්ය බඳුන ගෙනයාමට, පිරිසිදු කිරීමට හෝ හිස් කිරීමට පෙර සෑම විටම ඉරීම යන්ත්රය විසන්ධි කරන්න.
- ඉරීමේ යන්ත්රයට එයරොසෝල් හෝ ලිහිසි තෙල් ඉසින්න එපා.
- Do not shred metal objects, plastic, or adhesive materials other than specified.
- The shredder features recessed blades to help prevent user injury. However, exercise caution during operation.
- මෙම නිෂ්පාදනයේ පිළිකා සහ උපත් ආබාධ හෝ වෙනත් ප්රජනක හානි ඇති කරන කැලිෆෝනියා ප්රාන්තය දන්නා රසායනික ද්රව්ය අඩංගු වේ (යෝජනාව 65 අනතුරු ඇඟවීම).
3. පැකේජ අන්තර්ගතය
සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:
- GBC ShredMaster PX10-06 Paper Shredder Unit (Shredder Head and Waste Bin)
- උපදෙස් අත්පොත (මෙම ලේඛනය)
4. පිහිටුවීම
- ඇසිරීම: Carefully remove all components from the packaging. The shredder head is typically packed upside down inside the waste bin for shipping.
- එකලස් කිරීම: Invert the shredder head and place it securely on top of the waste bin. Ensure it is properly seated.
- ස්ථානගත කිරීම: Position the shredder on a flat, stable surface. The front-facing design is optimal for placement beside a desk. Ensure adequate ventilation around the unit.
- බල සම්බන්ධතාවය: විදුලි රැහැන සම්මත විදුලි වෙළඳසැලකට සම්බන්ධ කරන්න.
5. මෙහෙයුම් උපදෙස්
5.1 බල ගැන්වීම සක්රිය / අක්රිය කිරීම
- Locate the main power switch on the back of the shredder and turn it to the "ON" position.
- On the control panel, press and hold the power button for approximately three seconds. The blue indicator light will blink. Wait for the blue light to become solid, indicating the shredder is ready for operation.
- To turn off, press and hold the power button again until the light turns off, then switch off the main power switch.
5.2 ලේඛන ඉරා දැමීම
- Ensure the shredder is powered on and the blue indicator light is solid.
- Insert up to 10 sheets of paper into the paper entry slot. The shredder will automatically start shredding.
- The shredder can also shred staples and small paperclips.
- Do not exceed the maximum sheet capacity to prevent jams and motor strain.
- The shredder has a continuous run time of 6 minutes. After this period, it may require a cool-down period to prevent overheating.

Image 5.1: User operating the GBC ShredMaster PX10-06 shredder.

Image 5.2: The shredder's capability to shred up to 10 sheets, staples, and paperclips.
6. නඩත්තු කිරීම
6.1 කසළ බඳුන හිස් කිරීම
- Always turn off and unplug the shredder before emptying the waste bin.
- කසළ බඳුනෙන් ඉරීමේ හිස ප්රවේශමෙන් ඔසවන්න.
- Dispose of the shredded paper. The 6-gallon bin provides ample capacity, reducing the frequency of emptying.
- Replace the shredder head securely onto the waste bin.

Image 6.1: The 6-gallon waste bin, illustrating its capacity for shredded materials.
6.2 පිරිසිදු කිරීම
- With the shredder unplugged, wipe the exterior with a soft, dry cloth.
- උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවණ භාවිතා නොකරන්න.
7. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| ෂ්රෙඩර් එක ඔන් වෙන්නේ නෑ. |
|
|
| Shredder motor runs but paper does not shred, or jams frequently. |
|
|
| Shredder stops during operation and will not restart immediately. |
|
|
| Blue indicator light blinks but shredder does not operate. |
|
|
8. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | PX10-06 |
| ඉරීම වර්ගය | Super Cross-Cut |
| ආරක්ෂක මට්ටම | P-4 (3/16" x 1 1/2" අංශු) |
| පත්ර ධාරිතාව | Up to 10 sheets (20lb bond paper) |
| කඩදාසි | Paper, Staples, Paperclips |
| අපද්රව්ය බඳුන් ධාරිතාව | ගැලුම් 6 ක් |
| අඛණ්ඩ ධාවන කාලය | 6 විනාඩි |
| සිසිල් කාලය | Approximately 30 minutes (after 6 min run time) |
| ශබ්ද මට්ටම | Below 62 dBA (Whisper Shred Technology) |
| විශේෂ ලක්ෂණ | Jam-Stop Auto Reverse Technology, Quiet Operation, Touch Control, Recessed Blades |
| අයිතමයේ බර | රාත්තල් 14.3 කි |
| නිෂ්පාදන මානයන් | අඟල් 14.37 x 10.04 x 16.06 |
| ප්රමාණය (ආසන්න වශයෙන්) | 16" x 9.4" x 14" |
9. වගකීම් සහ සහාය
වගකීම් තොරතුරු සහ තාක්ෂණික සහාය සඳහා, කරුණාකර නිෂ්පාදකයාගේ නිලධාරියා වෙත යොමු වන්න. website or contact GBC customer service directly. Keep your purchase receipt as proof of purchase.
GBC Official Webඅඩවිය: www.gbc.com





