හැඳින්වීම
The TOLSEN 35-inch Heavy Duty Grabber is a versatile tool designed to extend your reach, allowing you to pick up objects from various locations without bending, stretching, or straining. Its robust construction and ergonomic design make it suitable for a wide range of indoor and outdoor tasks.
ආරක්ෂිත තොරතුරු
- Do not use the grabber to handle hazardous materials without appropriate personal protective equipment.
- Avoid attempting to lift excessively heavy objects that may damage the tool or cause injury.
- Keep fingers clear of the jaw mechanism during operation to prevent pinching.
- Store the grabber in a safe place, away from children and pets.
සංරචක
The TOLSEN Heavy Duty Grabber consists of the following main parts:
- Ergonomic Handle: සුවපහසු ග්රහණය සහ පාලනය සඳහා නිර්මාණය කර ඇත.
- ප්රේරක යාන්ත්රණය: Activates the grabber jaws.
- Safety Locking Feature: Locks the jaws in position.
- Aluminum Alloy Tube: The main shaft providing extended reach.
- Wide Jaw with Rubber Grippers: Non-slip surfaces for secure object retrieval.
රූපය 1: අවසන්view of the TOLSEN 35-inch Heavy Duty Grabber.
සැලසුම
The TOLSEN Heavy Duty Grabber comes pre-assembled and requires no complex setup. Simply remove it from its packaging.
මෙහෙයුම් උපදෙස්
- Grasping an Object:
Hold the ergonomic handle firmly. Position the grabber jaws around the desired object. Squeeze the trigger mechanism on the handle to close the jaws and secure the object.
Figure 2: Detail of the wide jaw and rubber grippers.
- Using the Safety Locking Feature:
Once an object is securely grasped, you can engage the safety locking feature (if present on your model) to maintain the grip without continuously squeezing the trigger. Refer to the handle design for the specific lock mechanism, typically a button or lever near the trigger.
Figure 3: Grabber holding a common household item.
- Releasing an Object:
To release the object, disengage the safety lock (if used) and release the trigger. The jaws will open, releasing the item.
Figure 4: Grabber jaws ready to grasp an object.
නඩත්තු කිරීම
- පිරිසිදු කිරීම: Wipe the grabber with a damp cloth to remove dirt or debris. Avoid using harsh chemicals that may damage the materials.
- ගබඩා: Store the grabber in a dry place. The integrated hanger on the handle allows for convenient storage.
- පරීක්ෂාව: Periodically check the jaws and trigger mechanism for any signs of wear or damage.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Jaws do not close properly. | Debris in mechanism, bent components. | Inspect jaws for obstructions and clear them. If components are bent, discontinue use. |
| Object slips from jaws. | Insufficient grip, slippery object, worn rubber grippers. | Ensure a firm squeeze on the trigger. Clean rubber grippers. Avoid lifting objects beyond the tool's capacity. |
| Trigger mechanism feels stiff. | Dirt accumulation, lack of lubrication. | Clean the trigger area. A small amount of silicone lubricant may be applied to moving parts if necessary. |
පිරිවිතර
- ආකෘතිය: TLSN-50093
- දිග: අඟල් 35 (සෙ.මී. 88.9)
- හකු විවෘත කිරීම: ආසන්න වශයෙන් අඟල් 10 (25.4 සෙ.මී.)
- ද්රව්ය: Anodized Aluminum Alloy, Stainless Steel, Rubber
- බර: ආසන්න වශයෙන් අවුන්ස 13.6 (ග්රෑම් 385)
- නිෂ්පාදකයා: TOLSEN TOOLS
වගකීම් සහ සහාය
For warranty information or technical support, please contact TOLSEN customer service through their official website or the retailer where the product was purchased. Please have your model number (TLSN-50093) and purchase date available.
