GYSFLASH 30.12 PL Smart Charger User Manual

1. හැඳින්වීම

Welcome to the user manual for the GYSFLASH 30.12 PL, a versatile smart charger designed for 12V lead-acid and lithium iron phosphate (LiFePO4) batteries. This manual provides essential information for safe and effective operation, setup, and maintenance of your charger. Please read this manual thoroughly before using the device.

2. වැදගත් ආරක්ෂක උපදෙස්

To ensure safe operation and prevent damage to the charger or battery, observe the following safety precautions:

• Always read the entire instruction manual before operating the charger.
• Ensure adequate ventilation during charging to prevent heat buildup.
• Avoid short-circuiting the charging clamps.
• The charger is equipped with reverse polarity protection; however, always connect the red (+) clamp to the positive (+) terminal and the black (-) clamp සෘණ (-) පර්යන්තයට.
• Disconnect the charger from the mains power before connecting or disconnecting the battery clamps.
• චාජරය වර්ෂාවට හෝ අධික තෙතමනයට නිරාවරණය නොකරන්න.
• දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.
• නැවත ආරෝපණය කළ නොහැකි බැටරි ආරෝපණය කිරීමට උත්සාහ නොකරන්න.

3. නිෂ්පාදන අවසන්view

The GYSFLASH 30.12 PL is a high-power, auto-sensing battery support unit with advanced features for various battery types and applications.

ප්රධාන ලක්ෂණ:

• Double Technology: Compatible with both 12V lead-acid (GEL, AGM, liquid, calcium) and lithium iron phosphate (LiFePO4) batteries.
• අධි බල ප්‍රතිදානය: Delivers a continuous 30 A at 100% duty cycle (40°C).
• Three Charging Currents: Selectable charging currents of 7 A, 15 A, and 30 A to match battery capacity.
• ප්‍රදර්ශනාගාර ප්‍රකාරය: Provides a stable power supply of up to 30A for maintaining battery charge in exhibited vehicles or during diagnostic procedures.
• සැපයුම් ආකාරය: Offers a stable on-board power supply, useful for maintaining vehicle electronics during battery changes or software updates.
• Wide Battery Capacity Range: Charges 12V lead-acid batteries from 15 Ah to 375 Ah and LiFePO4 batteries from 7 Ah to 375 Ah.
• මතක උපස්ථ: Retains vehicle memory information during battery removal.
• Optimized Battery Retention: Can remain connected to the battery during hibernation with an auto-restart function in case of power failure.
• අඩු වෙළුමtagඊ ආරෝපණය: Capable of initiating charging for batteries as low as 2 V.

Figure 1: Front panel of the GYSFLASH 30.12 PL charger, displaying mode selection, battery type indicators, and charging current options.

4. පිහිටුවීම සහ සම්බන්ධ කිරීම

4.1 ඇසිරීම

Carefully unpack the GYSFLASH 30.12 PL charger and inspect for any visible damage. Retain the packaging for future storage or transport.

4.2 බැටරියට සම්බන්ධ කිරීම

1. Ensure the charger's power cord is disconnected from the mains power outlet.
2. සම්බන්ධ කරන්න රතු (+) cl ආරෝපණය කිරීමamp ආරක්ෂිතව ධන (+) බැටරියේ පර්යන්තය.
3. සම්බන්ධ කරන්න කළු (-) cl ආරෝපණය කිරීමamp ආරක්ෂිතව සෘණ (-) බැටරියේ පර්යන්තය.
4. Verify that both connections are firm and free from corrosion.

4.3 Connecting to Mains Power

වරක් බැටරිය clamps are securely connected, plug the charger's power cord into a suitable 230V AC, 50/60Hz power outlet.

Figure 2: GYSFLASH 30.12 PL connected to a vehicle battery for charging or support.

5. මෙහෙයුම් උපදෙස්

5.1 ස්වයංක්‍රීය ආරෝපණය

The GYSFLASH 30.12 PL features an integrated temperature sensor that automatically adjusts charging parameters based on the ambient temperature, optimizing charging efficiency and battery life.

5.2 මාදිලිය තේරීම

භාවිතා කරන්න "මෝඩ්" button on the charger's front panel to select the appropriate charging program for your battery type:

• Pb (Lead-Acid): Select this mode for 12V lead-acid batteries, including GEL, AGM, liquid, and calcium types. Suitable for capacities from 15 Ah to 375 Ah.
• LiFePO4 (Lithium Iron Phosphate): Select this mode for 12V lithium iron phosphate batteries. Suitable for capacities from 7 Ah to 375 Ah.

5.3 Charging Current Selection

After selecting the battery type, choose one of the three available charging currents (7 A, 15 A, or 30 A) based on the battery's capacity and desired charging speed. Higher currents charge faster but should be appropriate for the battery's specifications.

5.4 ප්‍රදර්ශනාගාර මාදිලිය

This mode is designed to provide a stable power supply of up to 30A. It is ideal for maintaining the battery charge in vehicles displayed in showrooms or during diagnostic procedures, preventing battery drain without overcharging.

5.5 සැපයුම් මාදිලිය

The Supply Mode provides a stable on-board power supply to the vehicle's electrical system. This is particularly useful for maintaining power to vehicle electronics when the battery is being changed or during software updates, preventing loss of settings or data.

6. ආරෝපණ ක්රියාවලිය

1. Connect the charger to the battery terminals, ensuring correct polarity (red to positive, black to negative).
2. Plug the charger's power cord into a mains power outlet.
3. ඔබන්න "මෝඩ්" button to select the appropriate battery type (Pb for lead-acid or LiFePO4 for lithium).
4. Select the desired charging current (7 A, 15 A, or 30 A) based on your battery's requirements.
5. The charger will automatically begin the charging cycle. Monitor the progress indicators on the display.
6. Once the charging cycle is complete, first disconnect the charger from the mains power outlet.
7. ඉන්පසු, කළු (-) cl එක විසන්ධි කරන්න.amp from the battery, followed by the red (+) clamp.

7. නඩත්තු කිරීම

• Keep the charger clean and dry. Wipe the casinමෘදු, d සහිත gamp රෙදි. දරුණු රසායනික ද්රව්ය හෝ උල්ෙල්ඛ භාවිතා නොකරන්න.
• Store the charger in a cool, dry place when not in use, away from direct sunlight and extreme temperatures.
• Do not attempt to open the charger casing or perform any internal repairs. Refer all servicing to qualified personnel.
• ආරෝපණ කේබල් සහ cl නිතිපතා පරීක්ෂා කරන්න.ampහානි, ගෙවී යාම හෝ විඛාදනයට ලක්වන ඕනෑම සලකුණක් සඳහා s. හානියට පත් සංරචක වහාම ප්‍රතිස්ථාපනය කරන්න.

8. දෝශ නිරාකරණය

If you encounter issues with your GYSFLASH 30.12 PL, refer to the table below for common problems and solutions.

9. තාක්ෂණික පිරිවිතර

10. වගකීම් සහ සහාය

The GYSFLASH 30.12 PL is covered by a වසර 2ක දේශීය වගකීමක්. For technical assistance, warranty claims, or service inquiries, please contact your authorized GYS dealer or the official GYS support center. Please retain your proof of purchase for warranty validation.

For additional information and resources, please visit the official GYS webඅඩවිය.