හැඳින්වීම
The Fluid Audio FX50 is a 5-inch single point source coaxial reference monitor, designed for professional audio production and critical listening environments. This bi-amplified monitor delivers 90 watts of power with a frequency response of 49Hz to 22kHz (+/-3db). Its unique coaxial driver design ensures a coherent soundstage and precise imaging, making it an ideal tool for mixing and mastering.
ප්රධාන ලක්ෂණ ඇතුළත් වේ:
- 5-inch Coaxial Studio Monitor
- Frequency response: 49Hz – 22KHz (+/- 3db)
- Crossover frequency: 2.9KHz
- Class D and DSP powered ampඉසිලීම
- Dual concentric "coaxial" driver for accurate sound reproduction
නිෂ්පාදනය අවසන්view
The FX50 monitor features a robust design with a front-loaded slot port for optimized bass output. The coaxial driver places the tweeter in the center of the woofer, creating a single point source for all frequencies, which enhances stereo imaging and depth of field.
සැලසුම
Proper setup is crucial for optimal performance of your FX50 monitors. Ensure the monitors are placed on a stable surface, ideally at ear level, and equidistant from your listening position to create an equilateral triangle. The rear panel offers various input and control options.
සම්බන්ධතා:
- XLR ආදානය: For balanced audio connections from professional audio interfaces or mixers.
- TRS ආදානය: For balanced or unbalanced 1/4-inch connections.
- RCA ආදානය: For unbalanced audio connections from consumer-grade equipment.
- බල ආදානය: Connect the provided power cable to a suitable AC outlet.
Ensure the monitor's power switch is in the 'Off' position before making any connections. Once all audio cables are securely connected, you can switch the monitor 'On'.
ක්රියාත්මක වෙනවා
The FX50 monitors provide several controls on the rear panel to tailor their sound to your listening environment.
පාලන:
- වෙළුම් බොත්තම: Adjusts the overall output level of the monitor. Start with a low setting and gradually increase to a comfortable listening level.
- EQ Dip Switches: These switches allow for acoustic adjustments to compensate for room acoustics or personal preference. Refer to the labels on the rear panel for specific settings.
- HF Shelf (Switches 1-2): Adjusts high-frequency response. Options typically include 0dB, +1dB, -1dB, -2dB.
- Mid EQ (Switches 3-4): Adjusts mid-range frequency response. Options typically include 0dB, +1dB, -1dB, -2dB.
- Acoustic Space (Switches 5-6): Compensates for bass buildup when monitors are placed near walls or corners. Options typically include 0dB, -1dB, -2dB, -4dB.
- Low Freq Cutoff (Switches 7-8): Applies a high-pass filter to cut off low frequencies, useful when using a subwoofer. Options typically include Flat, 60Hz, 80Hz, 100Hz.
- බල සැපයුම් සුවිචය: මොනිටරය සක්රිය හෝ අක්රිය කරයි.
නඩත්තු කිරීම
To ensure the longevity and optimal performance of your Fluid Audio FX50 monitors, follow these maintenance guidelines:
- පිරිසිදු කිරීම: Use a soft, dry cloth to clean the cabinet. Avoid abrasive cleaners, solvents, or waxes. Do not spray liquids directly onto the monitor.
- ස්ථානගත කිරීම: Keep monitors away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the units.
- හැසිරවීම: Handle with care. Avoid dropping or subjecting the monitors to strong impacts.
- බලය: Disconnect the power cable from the wall outlet if the monitors will not be used for an extended period.
දෝෂගවේෂණය
If you encounter issues with your FX50 monitors, refer to the following common troubleshooting steps:
- ශබ්දයක් නැත:
- Check all power connections and ensure the monitor is switched on.
- Verify that audio cables are securely connected to both the monitor and the audio source.
- Ensure the volume knob on the monitor and your audio source is turned up.
- Test with a different audio source or cable to rule out faulty equipment.
- Hissing Noise:
- A slight hiss can be normal at high volume settings with no input. Reduce the monitor's volume if the hiss is excessive.
- Ensure you are using balanced cables (XLR or TRS) for longer runs to minimize interference.
- Check for ground loops by ensuring all audio equipment is plugged into the same power strip or outlet.
- විකෘති ශබ්දය:
- Lower the input level from your audio source or the monitor's volume.
- හානි වූ කේබල් සඳහා පරීක්ෂා කරන්න.
- Ensure the EQ dip switches are not set to extreme values that might cause clipping.
පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| මාදිලියේ නම | FX50 |
| ස්පීකර් වර්ගය | Dual concentric "coaxial" driver |
| නිර්දේශිත භාවිතයන් | Professional Audio Production and Critical Listening |
| ගැළපෙන උපාංග | ලැප්ටොප්, MP3 ප්ලේයර්, ස්මාර්ට්ෆෝන්, ටැබ්ලටය |
| වූෆර් විෂ්කම්භය | අඟල් 5 |
| සරවුන්ඩ් සවුන්ඩ් චැනල් වින්යාසය | 2.0 |
| වර්ණය | කළු |
| ඇතුළත් සංරචක | XLR, TRS, RCA cables |
| අයිතමයේ බර | පවුම් 8.15ක් |
| බලශක්ති ප්රභවය | රැහැන්ගත විදුලි |
| පාලන ක්රමය | Remote (referring to EQ dip switches and volume knob) |
| සම්බන්ධතා තාක්ෂණය | XLR, TRS, RCA |
| ශ්රව්ය ප්රතිදාන ප්රකාරය | ස්ටීරියෝ |
| සවිකිරීමේ වර්ගය | tabletop Mount |
| නිෂ්පාදන මානයන් | අඟල් 9.06 x 6.93 x 9.21 |
| ස්පීකර් උපරිම නිමැවුම් බලය | වොට් 90 |
Official Product Video (FX80 Series Overview)
වගකීම් සහ සහාය
The Fluid Audio FX50 monitor comes with a Limited Warranty. For detailed information regarding warranty terms, coverage, and how to obtain service, please refer to the warranty card included with your product or visit the official Fluid Audio webඅඩවිය.
වැඩිදුර සහාය, තාක්ෂණික සහාය, හෝ view additional product resources, please visit the Fluid Audio Store on Amazon or the official Fluid Audio webඅඩවිය.
