හැඳින්වීම
This instruction manual provides detailed guidance for the installation, operation, and maintenance of your Neomitis RT7 RF+ Wireless 7 Day Programmable Room Thermostat. This device is designed to provide efficient and flexible control over your heating system, ensuring optimal comfort and energy savings. Please read this manual thoroughly before installation and use to ensure correct and safe operation.
සැලසුම
පැකේජයේ අන්තර්ගතය
ස්ථාපනය ආරම්භ කිරීමට පෙර, සියලුම සංරචක පැකේජයේ ඇති බව තහවුරු කර ගන්න:
- RT7 RF+ Programmable Room Thermostat Unit
- රැහැන් රහිත ග්රාහක ඒකකය
- වෝල් මවුන්ට් වරහන
- රැහැන් රහිත ඇන්ටෙනාව
- Fixing Screws and Wall Plugs
- උපදෙස් අත්පොත (මෙම ලේඛනය)
ස්ථාපනය
Installation should be carried out by a qualified electrician or heating engineer. Ensure the main power supply to the heating system is switched off before commencing any wiring.
- Receiver Unit Placement: Mount the wireless receiver unit near the boiler or wiring center. Ensure it is not obstructed by large metal objects that could interfere with the wireless signal.
- Wiring the Receiver: Connect the receiver unit to your boiler according to the wiring diagram provided in the separate installation guide. The receiver typically requires a permanent live, neutral, and a switched live connection to control the boiler.
- Thermostat Unit Placement: Choose a suitable location for the thermostat unit, away from direct sunlight, draughts, or heat sources (e.g., radiators, lamps). An internal wall at approximately 1.5 meters from the floor is ideal.
- බැටරි ස්ථාපනය: Insert the required batteries into the thermostat unit. Ensure correct polarity.
- යුගල කිරීම (අවශ්ය නම්): The units are usually pre-paired. If not, follow the pairing instructions in the separate installation guide, typically involving pressing a button on both the receiver and thermostat.
- බල ගැන්වීම: Restore power to the heating system. The receiver unit should indicate its status (e.g., LED lights).
Image: The Neomitis RT7 RF+ Wireless Thermostat (left) with its digital display and rotary dial, alongside the wireless receiver unit (right) showing 'Override' and 'RF Test' buttons.
මෙහෙයුම් උපදෙස්
මූලික මෙහෙයුම
- සංදර්ශකය: The main display shows the current room temperature and the set temperature.
- රොටරි ඩයල්: Turn the rotary dial to adjust the set temperature. The new setting will be displayed temporarily.
- අභිබවා යාමේ කාර්යය: Press the rotary dial to temporarily override the current program. This allows you to manually set a temperature for a specific period.
- උනුසුම් දර්ශකය: A flame icon or similar symbol on the display indicates when the heating system is active.
වැඩසටහන්කරණය
The RT7 RF+ allows for 7-day programmable heating schedules. Refer to the detailed programming section in the separate user guide for step-by-step instructions on setting time periods and temperatures for each day of the week.
- Accessing Program Mode: Typically involves pressing and holding the rotary dial or a dedicated button.
- Setting Time and Day: Ensure the current time and day are correctly set for accurate programming.
- Setting Temperature Periods: Define up to 6 temperature periods per day, each with a start time and a desired temperature.
- Copying Programs: Some models allow copying programs from one day to another to simplify setup.
නඩත්තු කිරීම
පිරිසිදු කිරීම
Clean the thermostat unit regularly with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the plastic casing සහ ඉලෙක්ට්රොනික සංරචක.
බැටරි ප්රතිස්ථාපනය
The thermostat unit is battery-powered. When the battery low indicator appears on the display, replace the batteries promptly to ensure continuous operation. Use high-quality alkaline batteries of the specified type (refer to specifications section). Dispose of old batteries responsibly.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| No display on thermostat | මිය ගිය බැටරි; වැරදි බැටරි ස්ථාපනය. | බැටරි මාරු කරන්න; බැටරි ධ්රැවීයතාව පරීක්ෂා කරන්න |
| Heating not turning on/off | Loss of wireless signal; Receiver unit power off; Boiler fault | Check receiver power; Re-pair units; Consult boiler manual or engineer |
| වැරදි උෂ්ණත්ව කියවීම් | Thermostat placed near heat source/draught; Sensor fault | Relocate thermostat; Contact support if issue persists |
| Program not running as expected | Incorrect program settings; Time/day incorrect | Review and adjust program settings; Correct time and day |
පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | නියෝමිටිස් |
| ආදර්ශ අංකය | RT7RFPLUS |
| වර්ණය | සුදු |
| ද්රව්ය | ප්ලාස්ටික් |
| අයිතමයේ බර | 499 ග්රෑම් |
| බලශක්ති ප්රභවය | බැටරි බලයෙන් |
| සම්බන්ධතා තාක්ෂණය | Wi-Fi (Wireless RF) |
| පාලක වර්ගය | තල්ලු බොත්තම / භ්රමණ ඩයල් එක |
| උෂ්ණත්ව පාලන වර්ගය | වැඩසටහන්ගත කළ හැකි |
| විශේෂිත භාවිතයන් | බොයිලේරු පාලනය |
| ඇතුළත් සංරචක | Wall Mount Bracket, Wireless Antenna |
වගකීම් සහ සහාය
Neomitis products are manufactured to high standards and are subject to rigorous quality control. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Neomitis webසවිස්තරාත්මක වගකීම් නියමයන් සහ කොන්දේසි සඳහා අඩවිය.
For technical support, troubleshooting assistance, or to inquire about spare parts, please contact Neomitis customer service. Contact details can typically be found on the Neomitis webඅඩවිය හෝ නිෂ්පාදන ඇසුරුම්කරණය මත.
සබැඳි සම්පත්: For the most up-to-date information, FAQs, and additional support documents, please visit the official Neomitis webඅඩවිය.
වැදගත් සටහන්
ආරක්ෂාව: Always disconnect the main power supply before performing any installation or maintenance on the heating system or receiver unit. Only qualified personnel should undertake electrical wiring.
බැහැර කිරීම: At the end of its life, dispose of the product and its batteries responsibly, in accordance with local regulations for electronic waste and battery recycling.
Video Content: මෙම අත්පොතෙහි ඇතුළත් කිරීම සඳහා විකුණුම්කරුගේ නිල නිෂ්පාදන වීඩියෝ කිසිවක් නොතිබුණි.
