VISEL ELIMINACODE Remote Control User Manual

1. හැඳින්වීම

This manual provides detailed instructions for the proper use and maintenance of your VISEL ELIMINACODE radio remote control. This device is designed to operate seamlessly with VISEL display models TD2, TD3, TD4, MD2, and MD3, allowing for code elimination without direct interaction with the display's buttons or cables.

2 ආරක්ෂිත තොරතුරු

• දුරස්ථ පාලකය ජලයෙන් සහ අධික තෙතමනයෙන් ඈත් කර තබන්න.
• උපාංගය අතහැර දැමීමෙන් හෝ එය දැඩි බලපෑම්වලට ලක් කිරීමෙන් වළකින්න.
• Do not attempt to open or repair the remote control yourself. Refer to qualified personnel for service.
• භාවිතා කරන ලද බැටරි දේශීය රෙගුලාසිවලට අනුව වගකීමෙන් යුතුව බැහැර කරන්න.

3. පැකේජ අන්තර්ගතය

සියලුම අයිතම පැකේජයේ ඇති බවට වග බලා ගන්න:

• VISEL ELIMINACODE Remote Control
• 12V Battery (pre-installed or included separately)
• මෙම පරිශීලක අත්පොත

4. නිෂ්පාදන අවසන්view

The VISEL ELIMINACODE remote control features a simple, ergonomic design for ease of use. Below is an illustration of the device and its key components.

රූපය 1: VISEL ELIMINACODE Remote Control. The remote is dark grey, shaped like a stylized 'V' or 'Y'. It features a large red circular button labeled "NEXT" at the top, a smaller red circular indicator labeled "C" on the left, and a small grey circular indicator on the right. The brand name "Minipoint" is visible in the center, and a small circular hole is present at the bottom center, likely for a lanyard or attachment.

• NEXT Button (Red, Large): Used to advance the display to the next code or number.
• C Button/Indicator (Red, Small): Typically used for clearing or resetting functions, or as an indicator.
• Status Indicator (Grey, Small): May indicate power, signal transmission, or other operational status.

5. පිහිටුවීම

5.1. බැටරි ස්ථාපනය/පරීක්ෂාව

The remote control comes with a 12V battery included. In most cases, the battery is pre-installed. If the remote does not respond, check the battery compartment for proper installation or replace the battery.

1. දුරස්ථ පාලකයේ පිටුපස බැටරි මැදිරි කවරය සොයා ගන්න.
2. කවරය ප්‍රවේශමෙන් විවෘත කරන්න.
3. Insert or replace the 12V battery, ensuring correct polarity (+/-).
4. බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.

5.2. Pairing with VISEL Display (If Required)

The ELIMINACODE remote control is designed to work with VISEL display models TD2, TD3, TD4, MD2, and MD3. In most cases, the remote is pre-configured. If the remote does not control the display, follow the pairing instructions provided with your specific VISEL display model. General steps may include:

1. Ensure the VISEL display is powered on.
2. Access the pairing mode on your VISEL display (refer to your display's manual).
3. While the display is in pairing mode, press and hold the ඊළඟ button on the remote control for a few seconds until the display acknowledges the pairing.
4. දුරස්ථ පාලකයේ ක්‍රියාකාරිත්වය පරීක්ෂා කරන්න.

6. මෙහෙයුම් උපදෙස්

The ELIMINACODE remote control provides simple, intuitive operation for your VISEL display.

6.1. Advancing the Display Code

• To advance the displayed code or number on your VISEL display, simply press the large ඊළඟ බොත්තම වරක්.
• Each press will increment the display by one unit.

6.2. Clearing/Resetting the Display

• To clear the current code or reset the display, press the small C බොත්තම.
• The exact function of the 'C' button may vary slightly depending on your specific VISEL display model. Refer to your display's manual for detailed information.

6.3. මෙහෙයුම් පරාසය

The remote control operates using a radio frequency of 433.92 MHz. Ensure there are no significant obstructions between the remote and the display for optimal performance. The effective range may vary based on environmental conditions.

7. නඩත්තු කිරීම

7.1 පිරිසිදු කිරීම

මෘදු වියළි රෙද්දකින් දුරස්ථ පාලකය පිස දමන්න. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක භාවිතා නොකරන්න, මන්ද මේවා c වලට හානි කළ හැකිය.asing සහ අභ්‍යන්තර සංරචක.

7.2. බැටරි ප්රතිස්ථාපනය

When the remote control's range decreases or it becomes unresponsive, it is likely time to replace the 12V battery. Follow the steps in Section 5.1 for battery replacement.

7.3. ගබඩා කිරීම

Store the remote control in a cool, dry place, away from direct sunlight and extreme temperatures, when not in use for extended periods.

8. දෝශ නිරාකරණය

9. පිරිවිතර

10. වගකීම් සහ සහාය

For warranty information or technical support, please refer to the documentation provided with your original purchase or contact VISEL customer service directly. Contact details can typically be found on the manufacturer's official webඅඩවිය.