හැඳින්වීම
This manual provides detailed instructions for the assembly, operation, and maintenance of your TecTake 403238 / 800747 Swivel Office Chair. Please read these instructions carefully before assembly and use to ensure proper function and longevity of your product. This ergonomic office chair is designed for comfort and support during extended periods of sitting, featuring a padded seat, backrest, and headrest, along with adjustable height and tilt functions.
Image: The TecTake 403238 / 800747 Swivel Office Chair, showcasing its black faux leather upholstery, padded armrests, and five-star base with casters.
ආරක්ෂිත උපදෙස්
To prevent injury or damage to the chair, please observe the following safety guidelines:
- Ensure all components are securely fastened before use. Regularly check and tighten screws.
- පුටුවේ උපරිම බර ධාරිතාව ඉක්මවා නොයන්න (පිරිවිතර බලන්න).
- පුටුව මත සිටගෙන සිටීමෙන් හෝ එය පඩිපෙළ පුටුවක් ලෙස භාවිතා කිරීමෙන් වළකින්න.
- Keep hands and fingers clear of moving parts, especially during height and tilt adjustments.
- ඇලවීම වැළැක්වීම සඳහා පුටුව සමතලා මතුපිටක් මත භාවිතා කරන්න.
- හුස්ම හිරවීමේ අනතුරු වළක්වා ගැනීම සඳහා ඇසුරුම් ද්රව්ය ළමයින්ගෙන් ඈත් කර තබන්න.
- Do not expose the chair to direct sunlight or extreme temperatures, as this may damage the material.
සංරචක ලැයිස්තුව
එකලස් කිරීම ආරම්භ කිරීමට පෙර, සියලුම කොටස් පවතින බවත් හානි වී නොමැති බවත් තහවුරු කරගන්න. කිසියම් කොටසක් අස්ථානගත වී හෝ හානි වී ඇත්නම්, එකලස් කිරීම සමඟ ඉදිරියට නොයන්න සහ පාරිභෝගික සහාය අමතන්න.
- බැක්රෙස්ට්
- ආසන කුෂන්
- අත්වාරු (වම සහ දකුණ)
- Mechanism Plate (under seat)
- ගෑස් ලිෆ්ට් සිලින්ඩරය
- ගෑස් ලිෆ්ට් කවරය
- තරු පහේ පදනම
- කැස්ටර් (කෑලි 5)
- Hardware (screws, washers, Allen key)
එකලස් කිරීමේ උපදෙස්
Follow these steps to assemble your office chair. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.
Step 1: Attach Casters to the Base
Insert each of the five casters into the holes at the end of each leg of the five-star base. Push firmly until they click into place.
Step 2: Insert Gas Lift
Place the gas lift cylinder into the central hole of the five-star base. Then, slide the gas lift cover over the gas lift cylinder.
Step 3: Attach Mechanism Plate to Seat
Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the adjustment lever faces the front of the seat. Secure it with the provided screws and tighten them using the Allen key.
Image: Close-up of the chair's adjustment lever, indicating its function for height and tilt control. This lever is part of the mechanism plate that attaches to the seat.
Step 4: Attach Armrests to Seat and Backrest
Attach the armrests to the sides of the seat cushion using the designated screws. Do not fully tighten yet. Then, align the backrest with the armrests and secure it with screws. Once all screws are in place, tighten them evenly and securely.
පියවර 5: ආසන එකලස් කිරීම ගෑස් සෝපානයට සම්බන්ධ කරන්න
Carefully place the assembled seat and backrest onto the gas lift cylinder. The tapered end of the gas lift will fit into the central hole of the mechanism plate. Press down firmly on the seat to ensure a secure connection.
රූපය: ඉදිරිපස view of the fully assembled TecTake office chair, highlighting the padded seat, backrest, and armrests.
Your TecTake office chair is now assembled. Before use, ensure all connections are tight and the chair is stable.
මෙහෙයුම් උපදෙස්
Your TecTake office chair offers several adjustments to customize your seating experience:
උස ගැලපීම
To adjust the seat height, locate the lever on the right side, beneath the seat.
- ආසනය ඉහළ නැංවීම සඳහා: Lift the lever while taking your weight off the seat. The seat will rise automatically. Release the lever at the desired height.
- ආසනය පහත් කිරීමට: Lift the lever while remaining seated. The seat will lower. Release the lever at the desired height.
Tilt Function and Lock
The chair features a tilt mechanism allowing the backrest and seat to recline together.
- To enable tilt: Pull the same lever (used for height adjustment) outwards from the chair. The chair will now allow you to recline.
- ඇලවීම අගුළු දැමීමට: Push the lever inwards towards the chair. The chair will lock in its upright position.
Image: An illustration demonstrating the range of height adjustment and the reclining tilt function of the office chair.
ඇලවීමේ ආතතිය ගැලපීම
Beneath the seat, at the front, there is a round knob. This knob controls the tension of the tilt mechanism.
- To increase tension (harder to recline): බොත්තම දක්ෂිණාවර්තව හරවන්න.
- To decrease tension (easier to recline): Turn the knob counter-clockwise.
නඩත්තු කිරීම
Regular maintenance will help prolong the life and appearance of your office chair.
- පිරිසිදු කිරීම: For the faux leather upholstery, wipe with a soft, damp cloth. For stubborn stains, use a mild soap solution and wipe dry immediately. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the material.
- රාමුව සහ පදනම: Wipe metal and plastic parts with a damp රෙදි.
- වාත්තුකරුවන්: Periodically clean casters to remove hair, dust, and debris that may hinder smooth movement.
- දෘඪාංග: Every 3-6 months, check all screws and bolts to ensure they are tight. Retighten as necessary to maintain stability and safety.
- අධික බර පැටවීමෙන් වළකින්න: Do not exceed the chair's stated weight capacity.
දෝෂගවේෂණය
ඔබේ පුටුව සම්බන්ධයෙන් ඔබට කිසියම් ගැටළුවක් ඇති වුවහොත්, පහත සඳහන් පොදු ගැටළු සහ විසඳුම් වෙත යොමු වන්න:
- පුටුවේ ශබ්දය:
Check all screws and bolts and tighten them. A small amount of silicone lubricant can be applied to moving metal parts, avoiding contact with plastic or upholstery.
- පුටුව උස සකස් නොකරයි:
Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may be faulty and require replacement. Contact customer support.
- පුටුව අස්ථායී / සෙලවෙන බවක් දැනේ:
Verify that all screws, especially those connecting the armrests to the seat and backrest, are securely tightened. Ensure the gas lift is properly seated in the base and mechanism plate.
- Casters Do Not Roll Smoothly:
Remove any hair, dust, or debris that may be caught in the caster wheels. Clean the wheels and axles. Ensure the casters are fully inserted into the base.
පිරිවිතර
| වෙළඳ නාමය | TecTake |
| ආදර්ශ අංකය | 800747 |
| වර්ණය | කළු |
| ද්රව්ය | Polyurethane, Faux Leather, Pine Wood (frame) |
| අයිතමයේ බර | කිලෝ ග්රෑම් 16.7 යි |
| නිර්දේශිත භාවිතය | කාර්යාලය |
| විශේෂ ලක්ෂණය | ඝන ඉදි කිරීම් |
මානයන් (ආසන්න)
Image: Technical drawing illustrating the approximate dimensions of the TecTake office chair in centimeters. Key measurements include seat width (55 cm), seat depth (52 cm), backrest width (48 cm), adjustable seat height (47-55 cm), and overall height (115-123 cm).
- Overall Height: 115-123 cm
- Seat Height (adjustable): 47-55 cm
- ආසන පළල: 55 සෙ.මී
- ආසන ගැඹුර: 52 සෙ.මී
- Backrest Width: 48 cm
- Armrest Height (from seat): 68.5-76.5 cm
- Base Diameter: 67 cm
වගකීම් සහ සහාය
Specific warranty information for the TecTake 403238 / 800747 Swivel Office Chair is not provided in this document. For details regarding warranty coverage, spare parts availability, or technical support, please refer to the official TecTake website or contact their customer service directly. Information regarding spare parts availability was not provided in the product data.
ඔබට පිවිසිය හැක්කේ TecTake Brand Store on Amazon වැඩි විස්තර සඳහා.
