1. හැඳින්වීම
The Aideepen TL866II Plus is a high-speed universal programmer designed for reading, writing, and verifying a wide range of EPROM, EEPROM, Flash, and BIOS chips. It features a USB interface for connectivity and power, supporting various operating systems including Windows 7, Windows 8, and Windows 10. This manual provides essential information for the safe and effective use of your programmer.
2. ආරක්ෂිත උපදෙස්
- Always handle electronic components with care to prevent damage from electrostatic discharge (ESD). Use an anti-static wrist strap and mat when working with sensitive chips.
- Ensure the programmer is connected to a stable USB port on your computer.
- උපාංගය තෙතමනය, අධික උෂ්ණත්වයන් හෝ සෘජු හිරු එළියට නිරාවරණය නොකරන්න.
- Avoid opening the programmer casinඋ. ඇතුළත පරිශීලක-සේවා කළ හැකි කොටස් නොමැත.
- Verify the correct chip orientation and pin configuration before inserting into the ZIF socket or connecting via ICSP. Incorrect insertion can damage the chip or the programmer.
- සම්බන්ධතාවය සඳහා සපයා ඇති USB කේබලය පමණක් භාවිතා කරන්න.
3. පැකේජ අන්තර්ගතය
Carefully unpack your Aideepen TL866II Plus programmer and verify that all items are present:
- TL866II Plus Universal Programmer Unit
- USB කේබලය
- Multi-pin ICSP Cable
- Software CD (or download link for drivers and software)
Image 3.1: Contents of the Aideepen TL866II Plus Programmer package.
4. සැකසුම් මාර්ගෝපදේශය
Follow these steps to set up your TL866II Plus programmer:
- මෘදුකාංග සහ ධාවක ස්ථාපනය: Insert the provided software CD into your computer's optical drive, or download the latest software and drivers from the official Aideepen support website. Follow the on-screen instructions to complete the installation. It is recommended to install drivers before connecting the device.
- Connect the Programmer: Connect one end of the supplied USB cable to the USB port on the TL866II Plus programmer and the other end to an available USB port on your computer. The programmer's power (red) and run (green) indicator LEDs should illuminate.
- ස්ථාපනය සත්යාපනය කරන්න: After connecting, open your computer's Device Manager (for Windows) to confirm that the programmer is recognized correctly and that the drivers are installed without errors.
Image 4.1: TL866II Plus Programmer connected via USB.
5. මෙහෙයුම් උපදෙස්
This section outlines the general procedure for programming chips using the TL866II Plus.
- මෘදුකාංග දියත් කරන්න: Open the installed programming software on your computer.
- උපාංගය තෝරන්න: In the software, select the exact model of the chip you intend to program from the device list. Ensure the correct voltage and package type are chosen.
- Insert Chip: For DIP packages, lift the lever of the ZIF (Zero Insertion Force) socket, carefully insert the chip with the correct orientation (pin 1 usually indicated by a dot or notch, aligning with the socket's indicator), then press the lever down to secure the chip. For other packages, use appropriate adapters (not included) or connect via the ICSP header using the multi-pin cable.
- දත්ත පූරණය කරන්න File: Load the data file (e.g., .bin, .hex) you wish to write to the chip into the software's buffer.
- Perform Operations:
- කියවන්න: Reads the data from the inserted chip into the software buffer.
- මකන්න: Erases the contents of the chip (primarily for Flash/EEPROM).
- වැඩසටහන (ලිවීම): Writes the data from the software buffer to the chip.
- තහවුරු කරන්න: Compares the data on the chip with the data in the software buffer to ensure successful programming.
- Remove Chip: Once programming and verification are complete, lift the ZIF socket lever and carefully remove the chip.
Image 5.1: TL866II Plus Programmer with a chip in the ZIF socket and ICSP cable connected.
6. නඩත්තු කිරීම
- පිරිසිදු කිරීම: Use a soft, dry cloth to clean the exterior of the programmer. Do not use liquid cleaners or solvents. Keep the ZIF socket free from dust and debris.
- ගබඩා: Store the programmer in a cool, dry place away from direct sunlight and moisture when not in use.
- කේබල් රැකවරණය: Avoid bending or crimping the USB and ICSP cables excessively to prevent internal wire damage.
7. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Programmer not detected by computer. | USB cable not connected properly; drivers not installed; faulty USB port. | Ensure USB cable is securely connected. Reinstall drivers. Try a different USB port on your computer. |
| Programming fails or verification error occurs. | Incorrect chip selected in software; chip inserted incorrectly; faulty chip; insufficient power. | Verify the exact chip model and select it correctly in the software. Check chip orientation and ensure it's fully seated in the ZIF socket. Try a new chip. Ensure your computer's USB port provides sufficient power. |
| මෘදුකාංග බිඳ වැටීම හෝ කැටි වීම. | Software incompatibility; corrupted installation. | Ensure your operating system is supported (Windows 7/8/10). Reinstall the software from a fresh download. |
8. පිරිවිතර
- වෙළඳ නාමය: අයිදීපන්
- ආකෘතිය: TL866II Plus
- දෘඪාංග අතුරුමුහුණත: USB
- සහාය දක්වන මෙහෙයුම් පද්ධති: Windows 7, Windows 8, Windows 10
- අයිතමයේ බර: අවුන්ස 8.4 (ආසන්න වශයෙන් ග්රෑම් 238)
- පැකේජ මානයන්: අඟල් 4.8 x 4.2 x 2.4 (ආසන්න වශයෙන් 12.2 x 10.7 x 6.1 සෙ.මී.)
- Supported Chip Types: EPROM, EEPROM, Flash, BIOS, MCU, etc. (refer to software for full list)
9. වගකීම් සහ සහාය
Specific warranty details for the Aideepen TL866II Plus programmer are not provided in this manual. For warranty information, technical support, software updates, and additional resources, please refer to the official Aideepen webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවයට සෘජුවම සම්බන්ධ වන්න. ඕනෑම වගකීම් හිමිකම් සඳහා මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.
