1. නිෂ්පාදන අවසන්view
The Maxspect Jump Gyre MJ-GF2K is an advanced crossflow circulation pump designed for aquariums, providing efficient and near-silent water movement. Utilizing the same sinusoidal wave technology found in the high-end Gyre 300 series, this pump ensures optimal water flow for a healthy aquatic environment. The MJ-GF2K model is rated at 7500 liters per hour (approximately 1980 GPH) and is suitable for aquariums ranging from 50 to 250 liters (approximately 13 to 66 gallons). It includes a flow director plug, making it adaptable for smaller nano systems.
The pump comes with two sets of rotors: one elegant orange set and an additional black set for those preferring a more subdued aesthetic. It is supplied as a single-pump controller set, with the controller capable of running programmable 24-hour cycles across multiple flow modes.
රූපය 1: The Maxspect Jump Gyre MJ-GF2K Crossflow Circulation Pump, showcasing its dual rotor design and protective grilles.
ප්රධාන ලක්ෂණ:
- හරස් ප්රවාහ තාක්ෂණය: Generates broad, gentle flow patterns, eliminating dead spots in the aquarium.
- Sinusoidal Wave Technology: Ensures near-silent operation for a peaceful aquatic environment.
- ඉහළ ප්රවාහ අනුපාතය: MJ-GF2K model provides up to 7500 L/H (1980 GPH) suitable for 50-250L aquariums.
- සංයුක්ත නිර්මාණය: Includes a flow director plug for use in smaller nano tanks.
- වැඩසටහන්ගත කළ හැකි පාලකය: Allows for 24-hour programmable cycles with multiple flow modes.
- Dual Rotor Sets: Comes with both orange and black rotor sets for customization.
- සම්පූර්ණ කට්ටලය: Includes pump, controller, and power supply.
2. ආරක්ෂිත උපදෙස්
Please read and understand all safety instructions before operating the Maxspect Jump Gyre MJ-GF2K pump. Failure to follow these instructions may result in injury or damage to the product or aquarium.
- විදුලි ආරක්ෂාව: Always disconnect power to the pump and all other aquarium equipment before performing any maintenance, installation, or handling. Ensure your hands are dry when handling electrical components.
- බිම් දෝෂ පරිපථ බාධාව (GFCI): Always connect the pump to a GFCI-protected outlet.
- ගෘහස්ථ භාවිතය පමණි: This product is designed for indoor use in an aquarium environment only. Do not use it for any other purpose or outdoors.
- ජලයේ ගිල්වීම: The pump is designed to be fully submersible. The controller and power supply are NOT waterproof and must be kept dry.
- කේබල් කළමනාකරණය: Arrange the power cord to prevent tripping hazards and to ensure it does not come into contact with water. Create a "drip loop" to prevent water from traveling along the cord to the outlet.
- ළමුන් සහ සුරතල් සතුන්: Keep the product and its components out of reach of children and pets.
- හානි පරීක්ෂාව: Do not operate the pump if the power cord, plug, or any other component is damaged. Contact customer support for assistance.
- විසුරුවා හැරීම: Do not attempt to disassemble or repair the pump or controller beyond routine maintenance as described in this manual. Unauthorized modifications will void the warranty.
- උෂ්ණත්වය: Do not operate the pump in water temperatures exceeding 35°C (95°F) or below 4°C (39°F).
3. පැකේජ අන්තර්ගතය
Carefully unpack all items and check for any damage. If any components are missing or damaged, please contact your retailer or Maxspect customer support immediately.
- Maxspect Jump Gyre MJ-GF2K Pump Unit
- පාලක ඒකකය
- බල සැපයුම් ඇඩැප්ටරය
- විදුලි රැහැන්
- චුම්බක කන්ද
- Orange Rotor Set (pre-installed or separate)
- Black Rotor Set (additional)
- Flow Director Plug
- පරිශීලක අත්පොත (මෙම ලේඛනය)
රූපය 2: All components included in the Maxspect Jump Gyre MJ-GF2K package: pump, controller, power supply, and accessories.
4. පිහිටුවීම සහ ස්ථාපනය
Follow these steps to properly install your Maxspect Jump Gyre MJ-GF2K pump in your aquarium.
- ස්ථානගත කිරීම තෝරන්න: Select a location in your aquarium that allows for optimal water circulation. Crossflow pumps are typically placed horizontally near the water surface, on the side or back wall. Ensure the pump is fully submerged when operating.
- Prepare Magnetic Mount: The pump uses a magnetic mount. Place the inner magnetic bracket onto the pump unit. Position the pump inside the aquarium at your desired location.
- Secure External Magnet: Align the external magnetic bracket on the outside of the aquarium glass, directly opposite the internal magnet. The strong magnets will hold the pump securely in place. The maximum glass thickness supported is 15mm.
- පාලකයට සම්බන්ධ වන්න: Connect the pump's cable to the designated port on the controller unit. Ensure the connection is secure.
- බල සැපයුම සම්බන්ධ කරන්න: Connect the power supply adapter to the controller unit, then plug the power cord into the power supply.
- අලෙවිසැලට සම්බන්ධ කරන්න: Plug the power cord into a GFCI-protected electrical outlet. Ensure a drip loop is formed with the power cord to prevent water from reaching the outlet.
- Optional Flow Director Plug: If using the pump in a smaller nano system or to direct flow more precisely, insert the provided flow director plug into one end of the pump's rotor housing. This will restrict flow from that side, concentrating it to the other.
රූපය 3: The Maxspect Jump Gyre MJ-GF2K pump connected to its controller, ready for installation in an aquarium.
5. මෙහෙයුම් උපදෙස්
The Maxspect Jump Gyre MJ-GF2K controller allows for various flow modes and programmable cycles to suit your aquarium's needs.
පාලකය ඉවරයිview:
The controller features a display screen and several buttons for navigation and setting adjustments. Refer to the controller's specific button layout for detailed operation.
- බල බොත්තම: Turns the pump ON/OFF.
- මාදිලි බොත්තම: Cycles through different flow modes (e.g., Constant Flow, Pulsing, Random, Gyre).
- +/- බොත්තම්: Adjust flow intensity or navigate menu options.
- සකසන්න බොත්තම: Confirms selections or enters programming mode.
ප්රවාහ මාදිලි:
The controller offers multiple flow modes to simulate natural reef environments:
- නියත ප්රවාහය: නියමිත තීව්රතාවයකින් ස්ථාවර, අඛණ්ඩ ප්රවාහයක් සපයයි.
- Pulsing Mode: Creates a wave-like motion by rapidly increasing සහ අඩු කිරීමasing ප්රවාහය.
- අහඹු මාදිලිය: Varies flow intensity and pattern unpredictably.
- Gyre Mode: Optimized for creating a broad, laminar flow across the entire aquarium length.
Programming 24-Hour Cycles:
The controller allows you to set up a 24-hour schedule, switching between different flow modes and intensities throughout the day. Consult the controller's specific instructions for detailed programming steps. This typically involves:
- Entering programming mode.
- Setting start and end times for each program segment.
- Selecting the desired flow mode and intensity for each segment.
- Saving the program.
Note: This pump cannot be used in a 2-pump, 1-controller version and is not compatible with the SYNA G application.
6. නඩත්තු කිරීම
Regular maintenance is crucial for the longevity and optimal performance of your Maxspect Jump Gyre pump. Always disconnect power before performing any maintenance.
Routine Cleaning (Monthly):
- බලය විසන්ධි කරන්න: පොම්පය බල සැපයුමෙන් විසන්ධි කරන්න.
- මින්මැදුරෙන් ඉවත් කරන්න: Carefully remove the pump unit from the aquarium.
- විසුරුවා හැරීම: Gently twist and pull apart the pump housing to access the rotors and impellers. Note the orientation of all parts for reassembly.
- පිරිසිදු සංරචක: Use a soft brush (like a toothbrush) and warm water to remove any algae, detritus, or calcium buildup from the rotors, impellers, and pump housing. For stubborn calcium deposits, a mild vinegar solution can be used. Rinse thoroughly with fresh water.
- කොටස් පරීක්ෂා කරන්න: Check the rotors, impellers, and shafts for any signs of wear, cracks, or damage. Replace any worn parts.
- නැවත එකලස් කරන්න: Carefully reassemble the pump, ensuring all parts fit snugly and are correctly oriented.
- නැවත ස්ථාපනය කරන්න: Reinstall the pump in the aquarium and reconnect power.
රෝටර් ආදේශනය:
The pump comes with an additional set of black rotors. You can replace the orange rotors with the black ones, or replace worn rotors as needed. Follow the disassembly and reassembly steps from the "Routine Cleaning" section to swap out the rotors.
7. දෝශ නිරාකරණය
If you encounter issues with your Maxspect Jump Gyre pump, refer to the following troubleshooting guide. If the problem persists, contact Maxspect customer support.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| පොම්පය සක්රිය නොවේ. | ඒකකයට බලය නැත. ලිහිල් සම්බන්ධතාවය. පාලකයේ අක්රිය වීම. | Check if the power cord is securely plugged into the outlet and the controller. Ensure the outlet has power (test with another device). Verify all connections between pump, controller, and power supply. |
| Pump running but with reduced flow. | Algae or debris buildup on rotors/impellers. Worn rotors/impellers. Incorrect mode setting. | Disconnect power and clean the pump thoroughly as per maintenance instructions. Inspect rotors and impellers for wear and replace if necessary. Check the controller settings to ensure the desired flow intensity is selected. |
| පොම්පය අසාමාන්ය ශබ්දයක් නිකුත් කරයි. | Debris lodged in pump. Worn rotors/impellers or shaft. Improper assembly after cleaning. | Disconnect power and inspect the pump for any foreign objects. Clean the pump thoroughly. Check for worn parts and replace if needed. Ensure all components are correctly reassembled. |
| පාලක සංදර්ශකය හිස් හෝ ප්රතිචාර නොදක්වයි. | බල ප්රශ්නයක්. පාලකයේ අක්රිය වීම. | Ensure the power supply is connected and receiving power. Try unplugging and replugging the power supply. If the issue persists, the controller may be faulty. |
8. පිරිවිතර
Technical specifications for the Maxspect Jump Gyre MJ-GF2K Crossflow Circulation Pump.
| පිරිවිතර | වටිනාකම |
|---|---|
| ආදර්ශ අංකය | MJ-GF2K (Internal Ref: 2036) |
| වෙළඳ නාමය | Maxspect |
| බලශක්ති පරිභෝජනය | වොට් 25 |
| වෙළුමtage | Volts 220 (AC) |
| සංඛ්යාතය | 50 Hz |
| උපරිම ප්රවාහ අනුපාතය | 7000 L/H (approx. 1850 GPH) / 116.67 Liters per minute |
| නිර්දේශිත මින්මැදුරේ ප්රමාණය | 50 - 250 Liters (approx. 13 - 66 Gallons) |
| උපරිම වීදුරු ඝණකම | 15 මි.මී |
| මානයන් (L x W x H) | 22.3 x 7.2 x 3.81 cm (8.78 x 2.83 x 1.5 අඟල්) |
| බර | ග්රෑම් 457 (ආසන්න වශයෙන් රාත්තල් 1.01) |
| ද්රව්ය | ප්ලාස්ටික් |
| වර්ණය | තැඹිලි, කළු |
| බලශක්ති ප්රභවය | රැහැන්ගත විදුලි |
9. වගකීම් සහ සහාය
Maxspect products are manufactured to high-quality standards. Specific warranty terms and conditions may vary by region and retailer. Please retain your proof of purchase for any warranty claims.
Information regarding spare parts availability is currently unavailable through this product listing. For technical support, warranty inquiries, or to purchase replacement parts, please contact your authorized Maxspect retailer or visit the official Maxspect webසම්බන්ධතා තොරතුරු සඳහා අඩවිය.
නිෂ්පාදකයා: Maxspect
