Everbilt 1/3 HP Automatic Utility Pump HPEBAU33 Instruction Manual

1. නිෂ්පාදන අවසන්view

The Everbilt 1/3 HP Automatic Utility Pump HPEBAU33 is designed for efficient water removal from various low-lying areas such as crawl spaces and window wells. This submersible pump features an integrated mini-float switch for automatic operation, activating when water levels reach approximately 1-1/2 inches and deactivating when levels drop to about 1/8 inch. It is important to note that this pump is not intended for permanent installation, nor should it be used as a sump pump or in sewage/septic systems.

රූපය 1: Everbilt 1/3 HP Automatic Utility Pump HPEBAU33. This image displays the pump's compact design, including the power cord connection and the threaded discharge outlet.

2 ආරක්ෂිත තොරතුරු

Read and understand all safety instructions before operating the pump. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.

• විදුලි ආරක්ෂාව: Always connect the pump to a properly grounded outlet. Do not remove the grounding prong. Do not use extension cords unless absolutely necessary and ensure they are rated for outdoor use and the pump's power requirements.
• ජලය සහ විදුලිය: Never handle the pump or its power cord with wet hands while it is plugged in. Ensure the power cord is protected from sharp objects, hot surfaces, oil, and chemicals.
• අපේක්ෂිත භාවිතය: This pump is designed for clear water removal only. Do not use it for flammable liquids, corrosive chemicals, or in sewage/septic systems.
• උෂ්ණත්ව සීමාවන්: Do not operate the pump in water temperatures below 33°F (0.5°C) or above 95°F (35°C).
• ගිල්වීම: අධික උනුසුම් වීම වැළැක්වීම සඳහා ක්‍රියාත්මක වන අතරතුර පොම්පය සම්පූර්ණයෙන්ම ජලයෙන් යට විය යුතුය.
• ළමුන් සහ සුරතල් සතුන්: Keep children and pets away from the pump and any standing water during operation.

3. පැකේජ අන්තර්ගතය

ඇසුරුම් ඉවත් කිරීමෙන් පසු සියලුම අයිතම පවතින බවත් හානි නොවී ඇති බවත් තහවුරු කර ගන්න:

• Everbilt 1/3 HP Automatic Utility Pump HPEBAU33
• One 3/4 inch Garden Hose Adapter
• One 1-1/4 inch Check Valve

4. පිරිවිතර

5. සැකසුම් උපදෙස්

1. ස්ථානගත කිරීම: Position the pump on a stable, level surface in the area where water removal is needed. Ensure the pump's intake screen is clear of debris. The pump is suitable for crawl spaces, window wells, and other low-lying areas.
2. විසර්ජන සම්බන්ධතාවය:
   • For standard garden hoses: Attach the provided 3/4 inch garden hose adapter to the pump's 1-1/4 inch MIP discharge outlet. Then, connect a standard garden hose to the adapter.
   • For larger discharge hoses: Connect a 1-1/4 inch discharge hose directly to the pump's 1-1/4 inch MIP discharge outlet. The included 1-1/4 inch check valve should be installed in the discharge line to prevent backflow.
   Ensure all connections are secure to prevent leaks. Route the discharge hose to a suitable drainage area, away from the pump's location, to prevent water recirculation.
3. බල සම්බන්ධතාවය: Plug the 10 ft. power cord into a grounded 115V AC electrical outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for added safety, especially in wet environments.
4. මූලික පරීක්ෂාව: Before operation, ensure the pump is fully submerged in water or will be submerged once water levels rise. The float switch requires water to operate correctly.

වැදගත් සටහන: This pump is not designed for permanent installation and should not be used as a primary sump pump for continuous, long-term operation in a sump pit. It is intended for temporary water removal applications.

6. මෙහෙයුම් උපදෙස්

The Everbilt HPEBAU33 pump operates automatically based on water levels detected by its integrated mini-float switch.

1. ස්වයංක්‍රීය ක්‍රියාකාරිත්වය: Once plugged in and placed in water, the pump will automatically turn on when the water level reaches approximately 1-1/2 inches. It will continue to pump water until the level drops to approximately 1/8 inch, at which point the pump will automatically turn off.
2. Continuous Readiness: The pump can be left plugged in indefinitely, allowing it to activate automatically whenever water accumulates to the turn-on level.
3. අධීක්ෂණය: Periodically check the pump's operation and the discharge area to ensure proper function and prevent blockages.

7. නඩත්තු කිරීම

නිතිපතා නඩත්තු කිරීම ප්‍රශස්ත ක්‍රියාකාරිත්වය සහතික කරන අතර ඔබේ පොම්පයේ ආයු කාලය දීර්ඝ කරයි.

• බලය විසන්ධි කරන්න: ඕනෑම නඩත්තුවක් හෝ පිරිසිදු කිරීමක් සිදු කිරීමට පෙර සෑම විටම පොම්පය බල ප්‍රභවයෙන් විසන්ධි කරන්න.
• ඉන්ටේක් තිරය පිරිසිදු කරන්න: Regularly inspect and clean the intake screen at the bottom of the pump to remove any debris (leaves, dirt, small stones) that could obstruct water flow and reduce efficiency.
• පාවෙන ස්විචය පරීක්ෂා කරන්න: Ensure the mini-float switch moves freely and is not obstructed by debris.
• Inspect Cord and Connections: Periodically check the power cord for any signs of damage (cuts, fraying) and ensure all hose connections are secure.
• ගබඩා: පොම්පය දිගු කාලයක් ගබඩා කරන්නේ නම්, එය හොඳින් පිරිසිදු කර, සියලු ජලය බැස ගොස්, වියළි, ​​හිම වලින් තොර ස්ථානයක ගබඩා කරන්න.

8. දෝශ නිරාකරණය

ඔබේ පොම්පය සමඟ ගැටළු ඇති වුවහොත්, පහත සඳහන් පොදු ගැටළු සහ විසඳුම් වෙත යොමු වන්න:

9. වගකීම් සහ සහාය

This Everbilt pump is covered by a වසර 1ක නිෂ්පාදක වගකීම මිලදී ගත් දින සිට. මෙම වගකීම් සහතිකය සාමාන්‍ය භාවිතය යටතේ ද්‍රව්‍ය හා වැඩ කිරීමේ දෝෂ ආවරණය කරයි.

For warranty claims, technical assistance, or replacement parts, please contact Everbilt customer support. Keep your purchase receipt as proof of purchase.

Please refer to the official Everbilt website or your product packaging for the most current contact information and detailed warranty terms.