Feit Electric 4ft T8 LED Universal Plug & Play Tube Light උපදෙස් අත්පොත

1. හැඳින්වීම

Thank you for choosing Feit Electric 4ft T8 LED Universal Plug & Play Tube Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED bulbs. Please read these instructions thoroughly before installation and retain them for future reference.

2 ආරක්ෂිත තොරතුරු

• Always turn off power at the circuit breaker before installation, removal, or inspection.
• Do not use with dimmers unless explicitly stated on the product or packaging. These bulbs are non-dimmable.
• Ensure the fixture is compatible with Type A (Plug & Play) LED tubes. Refer to the compatible ballast list.
• Do not bend the tube during installation.
• This product is designed for indoor use and suitable for damp ස්ථාන.
• Do not attempt to disassemble or modify the bulb.
• දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.

3. පැකේජ අන්තර්ගතය

සෑම පැකේජයකම අඩංගු වන්නේ:

• 4 x Feit Electric 4ft T8 LED Universal Plug & Play Tube Lights

Image: Four Feit Electric 4ft T8 LED Universal Plug & Play Tube Lights, shown in a pack.

Image: Packaging for the Feit Electric 4ft LED Universal Linear Lamp, indicating "Plug & Play (Type A)" and T8/T12 replacement.

4. නිෂ්පාදන ලක්ෂණ

• Plug & Play (Type A): Direct installation into existing fluorescent fixtures without rewiring or ballast removal.
• බලශක්ති ඉතිරිකිරීම්: Uses 14 watts, replacing 32/40 watt fluorescent bulbs, producing 1700 lumens.
• සැහැල්ලු වර්ණය: 3000K Warm White for a soft, crisp light.
• දිගු ආයු කාලය: Rated for up to 50,000 hours, reducing replacement frequency.
• ක්ෂණික ක්‍රියාත්මක: Provides full brightness immediately with no flickering or strobing.
• Shatterproof Coating: Enhanced durability.
• සහතික: UL Listed, DLC Certified, RoHS compliant, 100% mercury-free.

Image: Graphic detailing key product specifications: 14 Watts (equivalent to 40 Watts), 1700 Lumens, G13 Bi-Pin Base, and Plug & Play (Type A) functionality.

Image: Graphic illustrating the product dimensions: 48 inches in length and 1.1 inches in width, highlighting its shatterproof coating.

5. පිහිටුවීම සහ ස්ථාපනය

1. විදුලිය විසන්ධි කිරීම: Before beginning installation, ensure the power to the fixture is completely turned off at the circuit breaker.
2. පැරණි ප්‍රතිදීප්ත නල ඉවත් කරන්න: Carefully remove the existing fluorescent tubes from the fixture.
3. Check Ballast Compatibility: Verify that your existing ballast is compatible with Type A LED tubes. Refer to the "Compatible Ballasts" section or the product packaging for a list of compatible ballasts.
4. LED නළය ස්ථාපනය කරන්න: Insert the two pins of the Feit Electric LED tube into the lampholders on one end of the fixture. Gently push the tube into place and twist it until it locks securely into the lampholders on both ends. Ensure the tube is firmly seated.
5. බලය ප්‍රතිස්ථාපනය කරන්න: LED නළය ආරක්ෂිතව සවි කළ පසු, පරිපථ කඩනයේ බලය ප්‍රතිස්ථාපනය කරන්න.
6. පරීක්ෂණය: නිසි ක්‍රියාකාරිත්වය තහවුරු කිරීම සඳහා ආලෝක ස්විචය ක්‍රියාත්මක කරන්න.

Image: Diagram illustrating the "Direct Replacement (Type A)" installation method, showing the LED tube connecting to an existing ballast without rewiring.

Image: A detailed list of various compatible ballasts required for the proper function of the Feit Electric LED tubes.

6. මෙහෙයුම් උපදෙස්

After successful installation, simply use your existing light switch to turn the Feit Electric LED tube lights on and off. These bulbs provide instant full brightness without any warm-up time or flickering.

Image: An installed Feit Electric LED tube light illuminating a garage, demonstrating instant full brightness without flickering or strobing.

Image: A Feit Electric 3000K Warm White LED tube light installed and emitting a warm, soft light.

7. නඩත්තු කිරීම

Feit Electric LED tube lights are designed for long-term, maintenance-free operation. They have an average life of 50,000 hours. No special cleaning or bulb replacement procedures are typically required during their lifespan. To clean the exterior of the bulb, ensure power is off and wipe with a soft, dry cloth.

8. දෝශ නිරාකරණය

ආලෝකය ක්‍රියාත්මක නොවේ:

• බල ස්විචය "ON" ස්ථානයේ ඇති බවට වග බලා ගන්න.
• Check that the circuit breaker is not tripped.
• Verify the LED tube is correctly seated in the lampදරන්නන්.
• Confirm your existing ballast is compatible with Type A LED tubes. Incompatible ballasts may prevent the bulb from lighting or cause flickering.
• If replacing multiple bulbs, test each new bulb individually to identify any faulty units.

ආලෝකය දැල්වෙයි:

• Ensure the LED tube is fully and correctly inserted into the fixture.
• Verify ballast compatibility. An incompatible or failing ballast can cause flickering.

9. පිරිවිතර

10. වගකීම් සහ සහාය

This Feit Electric bulb comes with a වසර 5ක වගකීමක්. For warranty claims or technical support, please contact Feit Electric customer service. Refer to the official Feit Electric webනවතම සම්බන්ධතා තොරතුරු සඳහා අඩවිය.

For additional product information, visit the Feit Electric Storefront.