Nerf XX-100

Nerf Rival Knockout XX-100 Blaster User Manual

Model: XX-100 (E6594UF1)

වෙළඳ නාමය: නර්ෆ්

1. හැඳින්වීම

This manual provides essential information for the safe and effective operation of your Nerf Rival Knockout XX-100 Blaster. Please read all instructions carefully before use and retain this manual for future reference.

2. වැදගත් ආරක්ෂක තොරතුරු

WARNING: TO AVOID EYE INJURY:

3. පෙට්ටියේ ඇති දේ

Nerf Rival Knockout XX-100 Blaster in packaging and with two yellow Rival rounds.

Image: The Nerf Rival Knockout XX-100 Blaster, shown both in its retail packaging and removed from the box, accompanied by two yellow Nerf Rival rounds.

4. පිහිටුවීම

4.1. Loading Rounds

  1. Open the Breech: Locate the orange lever on the side of the blaster. Push this lever to open the breech, revealing the loading chamber.
  2. Hand loading a yellow Nerf Rival round into the open breech of the blaster.

    Image: A hand inserts a yellow Nerf Rival round into the open breech of the blaster.

  3. Insert a Round: Place one Official Nerf Rival round into the open breech. Ensure it is seated correctly.
  4. Close the Breech: Push the breech back into place until it clicks securely.

4.2. Storing Extra Rounds

The blaster features integrated storage for additional rounds. Simply push the rounds into the two circular slots located on the front-bottom of the blaster.

Hand placing a yellow Nerf Rival round into the integrated storage slot on the blaster.

Image: A hand demonstrates placing a yellow Nerf Rival round into one of the two integrated storage slots on the blaster's front.

5. මෙහෙයුම් උපදෙස්

5.1. Priming the Blaster

  1. Pull the Priming Handle: Grasp the orange priming handle located at the bottom of the grip. Pull it down firmly until it locks into place. This action compresses the spring mechanism.
  2. A hand pulling down the orange priming handle at the base of the blaster's grip.

    Image: A hand pulls the orange priming handle downwards from the bottom of the blaster's grip, preparing it for firing.

5.2. Firing the Blaster

  1. Disengage Trigger Lock: Ensure the orange trigger lock switch, located above the trigger, is in the unlocked position (usually indicated by a visible green or unblocked area).
  2. අරමුණ: Point the blaster safely towards your target.
  3. ගින්න: Pull the trigger to launch the Rival round. The blaster fires rounds at a velocity of 90 feet per second.
  4. A person wearing eye protection firing the Nerf Rival Knockout XX-100 Blaster, with a yellow Rival round in mid-air.

    Image: A person, wearing protective eyewear, aims and fires the Nerf Rival Knockout XX-100 Blaster, with a yellow Rival round visible in flight.

6. නඩත්තු කිරීම

To ensure the longevity and optimal performance of your Nerf Rival Knockout XX-100 Blaster, follow these simple maintenance guidelines:

7. දෝශ නිරාකරණය

ගැටලුවවිය හැකි හේතුවවිසඳුම
Blaster does not fire.Trigger lock engaged.Slide the trigger lock to the unlocked position.
Blaster does not fire.Blaster not fully primed.Pull the priming handle down firmly until it clicks into place.
Round jams in the breech.Damaged or non-official round.Open the breech, carefully remove the jammed round, and use only official, undamaged Nerf Rival rounds.
Reduced firing velocity.Worn spring mechanism or damaged rounds.Ensure rounds are in good condition. If the issue persists, contact customer support.

8. පිරිවිතර

විශේෂාංගයවිස්තර
ආදර්ශ අංකයE6594UF1
නිෂ්පාදන මානයන්අඟල් 2.01 x 9.09 x 7.76
අයිතමයේ බරඅවුන්ස 8.2 කි
නිර්දේශිත වයසඅවුරුදු 14 සහ ඊට වැඩි
Firing Velocityතත්පරයට අඩි 90 දක්වා
බලශක්ති ප්රභවයඅතින් ක්‍රියාත්මක වන (බැටරි අවශ්‍ය නොවේ)
නිෂ්පාදකයාහස්බ්රෝ

9. වගකීම් සහ සහාය

For warranty information or customer support, please refer to the contact details provided on the product packaging or visit the official Nerf webවෙබ් අඩවිය. මිලදී ගැනීම පිළිබඳ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

අදාළ ලියකියවිලි - XX-100

පෙරview Nerf Hyper MACH-100 Blaster: මෙහෙයුම් සහ ආරක්ෂක උපදෙස්
Nerf Hyper MACH-100 බ්ලාස්ටරය සඳහා සවිස්තරාත්මක මාර්ගෝපදේශය, එය පූරණය කරන ආකාරය, ගිනි තබන ආකාරය, තදබදය ඉවත් කරන ආකාරය, බ්ලාස්ටරය ගබඩා කරන ආකාරය සහ වැදගත් ආරක්ෂක පූර්වාරක්ෂාවන් විස්තර කරයි. බැටරි තොරතුරු සහ නිෂ්පාදන අනුකූලතාව ඇතුළත් වේ.
පෙරview Nerf Rough Cut 2X4 Elite Blaster User Manual
User manual for the Nerf Rough Cut 2X4 Elite Blaster, detailing its features, operation, and safety precautions. Includes instructions for loading, single fire, and slam fire modes.
පෙරview Nerf Pro Gelfire Legion Blaster: උපදෙස්, ආරක්ෂාව සහ ක්‍රියාකාරිත්වය
Nerf Pro Gelfire Legion Blaster සඳහා සවිස්තරාත්මක මාර්ගෝපදේශය, Gelfire රවුන්ඩ් සැකසීම, සජලනය, වෙඩි තැබීමේ ක්‍රම, ආරක්ෂක පූර්වාරක්ෂාවන් සහ ගබඩා කිරීම ආවරණය කරයි. නිල Hasbro නිෂ්පාදන තොරතුරු ඇතුළත් වේ.
පෙරview Nerf N-Strike Elite Strongarm Blaster: පරිශීලක මාර්ගෝපදේශය
Nerf N-Strike Elite Strongarm සෙල්ලම් බ්ලාස්ටර් සඳහා නිල උපදෙස්. ඩාර්ට්ස් පූරණය කරන ආකාරය, තනි වෙඩි තැබීම් කරන ආකාරය සහ වේගවත් වෙඩි තැබීම සඳහා slam-fire විශේෂාංගය භාවිතා කරන ආකාරය ඉගෙන ගන්න. ආරක්ෂක අනතුරු ඇඟවීම් සහ නිෂ්පාදන විස්තර ඇතුළත් වේ.
පෙරview NERF මොඩියුලස් ගෝස්ට් ඔප්ස් එවාඩර් බ්ලාස්ටර්: එකලස් කිරීම, ක්‍රියාත්මක කිරීම සහ ආරක්ෂණ මාර්ගෝපදේශය
NERF මොඩියුලස් ගෝස්ට් ඕප්ස් එවාඩර් බ්ලාස්ටර් සඳහා සවිස්තරාත්මක මාර්ගෝපදේශය, එකලස් කිරීම, පැටවීම, වෙඩි තැබීම, බැටරි ප්‍රතිස්ථාපනය සහ වැදගත් ආරක්ෂක අනතුරු ඇඟවීම් ආවරණය කරයි. ඔබේ NERF බ්ලාස්ටර් ඵලදායීව සහ ආරක්ෂිතව ක්‍රියාත්මක කරන්නේ කෙසේදැයි ඉගෙන ගන්න.
පෙරview නර්ෆ් ෆෝර්ට්නයිට් AR-L බ්ලාස්ටර්: උපදෙස් සහ විශේෂාංග
මෙම ලේඛනය Nerf Fortnite AR-L Blaster සඳහා උපදෙස් සහ විස්තර සපයයි, ඒවාට ජෑම් ඉවත් කරන ආකාරය, බැටරි ඇතුළු කරන ආකාරය, ලෝඩ් සහ ෆයර් ඩාර්ට්ස් සහ බ්ලාස්ටර් ගබඩා කරන ආකාරය ඇතුළත් වේ. එය බහුභාෂා සහාය ලබා දෙන අතර ට්‍රිගර්, ෆ්ලිප්-අප් සයිට්, උපායික රේල් සහ ත්වරණ බොත්තම වැනි ප්‍රධාන සංරචක ඉස්මතු කරයි.