LE Solar Outdoor Motion Sensor Light WL4000 Instruction Manual

1. හැඳින්වීම

This manual provides detailed instructions for the installation, operation, and maintenance of your LE Solar Outdoor Motion Sensor Light, model WL4000. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

රූපය 1.1: ඉවරයිview of the LE Solar Outdoor Motion Sensor Light WL4000.

2. නිෂ්පාදන ලක්ෂණ

• පුළුල් ආලෝකකරණ කෝණය: Features 3 adjustable heads providing 270° wide lighting coverage.
• ඉහළ දීප්තිය: Delivers 1000 lumens of 6500K daylight illumination.
• කාර්යක්ෂම සූර්ය ආරෝපණය: Converts sunlight into electricity, charging during the day for night operation.
• PIR චලන සංවේදකය: Detects motion within 16-26 feet and a 120° angle, automatically turning the light on.
• ස්වයංක්‍රීය ක්‍රියාකාරිත්වය: Stays off during the day, charges in sunlight, and turns on for 20 seconds when motion is detected at night.
• කල් පවතින සහ කාලගුණයට ඔරොත්තු දෙන: IP65 waterproof rating ensures resistance to water, heat, and frost for reliable outdoor performance.
• පහසු ස්ථාපනය: Wireless design requires no household electrical circuit, simplifying mounting with included hardware.

Image 2.1: Product dimensions and adjustable light heads.

Image 2.2: The 270-degree wide lighting angle.

රූපය 2.3: චලන සංවේදක හඳුනාගැනීමේ පරාසය සහ කෝණය.

3. පැකේජ අන්තර්ගතය

• LE Solar Outdoor Motion Sensor Light (WL4000)
• සවි කිරීමේ දෘඩාංග (ඉස්කුරුප්පු සහ බිත්ති නැංගුරම්)
• පරිශීලක අත්පොත

4. පිහිටුවීම සහ ස්ථාපනය

Follow these steps for proper installation of your solar light:

1. ස්ථානයක් තෝරන්න: Select an outdoor location that receives direct sunlight for at least 8 hours a day to ensure optimal charging. The recommended installation height is 1.5-3.5 meters (5-12 feet).
2. එල් ස්ථාපනය කරන්නamp හිමිකරු: Use the included screws and wall anchors to securely fix the lamp holder to the desired exterior wall.
3. ආලෝකය සක්රිය කරන්න: Locate the power switch on the back of the light unit. Press the button to turn the light ON.
4. ආලෝකය එල්ලන්න: Carefully hang the solar light unit onto the installed lamp දරන්නා.
5. ආලෝක ශීර්ෂ සකසන්න: Adjust the three light heads and the solar panel to your preferred angles for optimal lighting coverage and sun exposure.

Image 4.1: Step-by-step installation process.

Image 4.2: Fixing the lamp ඉස්කුරුප්පු සහිත රඳවනය.

Image 4.3: Activating the light using the mode switch.

Image 4.4: Hanging the light onto the lamp දරන්නා.

5. මෙහෙයුම් උපදෙස්

The LE Solar Outdoor Motion Sensor Light operates automatically based on ambient light and motion detection.

• දිවා කාලයේ මෙහෙයුම: The light will remain off during the day and the solar panel will charge the internal battery using sunlight. Ensure the solar panel is clean and exposed to direct sunlight for optimal charging.
• රාත්රී මෙහෙයුම: Once it gets dark, the motion sensor becomes active. When motion is detected within its 16-26 ft range and 120° angle, the light will automatically turn on at full brightness.
• ස්වයංක්‍රීයව වසා දැමීම: The light will automatically turn off approximately 20 seconds after no further motion is detected.

Image 5.1: Solar charging and motion-activated lighting cycle.

6. නඩත්තු කිරීම

To ensure optimal performance and extend the lifespan of your solar light, follow these maintenance guidelines:

• සූර්ය පැනලය පිරිසිදු කරන්න: නිතිපතා සූර්ය පැනලය මෘදු, d රෙදි කඩකින් පිස දමන්න.amp දූවිලි, අපිරිසිදුකම් සහ සුන්බුන් ඉවත් කිරීමට රෙදි. පිරිසිදු පුවරුවක් කාර්යක්ෂම හිරු එළිය අවශෝෂණය සහ ආරෝපණය සහතික කරයි.
• පැහැදිලි බාධා: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel, especially during peak sunlight hours.
• හානිය සඳහා පරීක්ෂා කරන්න: Periodically check the light for any physical damage, loose connections, or signs of wear.
• කාලගුණ ප්රතිරෝධය: The light is designed with IP65 waterproofing, making it resistant to rain, heat, and frost. However, extreme weather conditions may temporarily affect performance.

Image 6.1: IP65 waterproof, heat, and frost resistance features.

7. දෝශ නිරාකරණය

If your solar light is not functioning as expected, consider the following common issues and solutions:

• රාත්‍රියේදී ආලෝකය දැල්වෙන්නේ නැත:
  • බල ස්විචය ක්‍රියාත්මක ස්ථානයේ ඇති බව සහතික කර ගන්න.
  • Verify the solar panel is receiving sufficient direct sunlight (at least 8 hours) during the day. Relocate if necessary.
  • Check if the solar panel is dirty or obstructed. Clean it thoroughly.
  • Confirm it is dark enough for the light to activate. The light has a built-in photocell sensor.
• Light stays on for a short period or is dim:
  • Insufficient charging due to cloudy weather, shade, or a dirty solar panel. Allow for more charging time or clean the panel.
  • The battery may not be fully charged. Ensure optimal sun exposure.
• චලන සංවේදකය හඳුනා නොගනී:
  • සංවේදකය අවහිර නොවන බවට වග බලා ගන්න.
  • Verify the light is installed within the recommended height range (1.5-3.5 meters).
  • Test the sensor by walking within its detection range.

8. පිරිවිතර

9. වගකීම් සහ සහාය

For warranty information or technical support, please contact Lepro Customer Service. Details regarding your product's warranty period can be found with your purchase documentation or by contacting the seller directly. Please retain your proof of purchase for any warranty claims.