DAB FEKA600

DAB FEKA 600 MA Submersible Pump User Manual

Model: FEKA600

1. හැඳින්වීම

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your DAB FEKA 600 MA submersible pump. Please read this manual thoroughly before using the pump and keep it for future reference.

The DAB FEKA 600 MA is a robust submersible pump designed for draining and lifting light wastewater, greywater, and rainwater in domestic and residential environments. It is suitable for both fixed and mobile installations.

2 ආරක්ෂිත තොරතුරු

Always observe the following safety precautions to prevent personal injury and damage to the pump.

3. නිෂ්පාදන අවසන්view

The DAB FEKA 600 MA pump is engineered for reliability and durability, featuring high-quality materials and a robust design.

DAB FEKA 600 MA Submersible Pump

Figure 3.1: DAB FEKA 600 MA Submersible Pump - Front View.

DAB FEKA 600 MA Pump Features Diagram

Figure 3.2: Key Features of the DAB FEKA 600 MA Pump. This diagram highlights the automatic start/stop float arm, durable construction materials, a flow rate of 15,000 liters per hour, a maximum head of 9 meters, and the ability to handle solids up to 25mm. Note: Official specifications for flow rate and head are provided in Section 8.

3.1 ප්රධාන සංරචක

3.2 අයදුම්පත්

The FEKA 600 MA pump is suitable for various applications, including:

DAB FEKA 600 MA Pump Applications

Figure 3.3: Common Applications for the DAB FEKA 600 MA Pump. This image illustrates its use for emptying crawl spaces, pumping dirty water, dewatering construction sites, and managing rainwater.

4. පිහිටුවීම සහ ස්ථාපනය

පොම්පයේ ක්‍රියාකාරිත්වය සහ කල්පැවැත්ම සඳහා නිසි ස්ථාපනය ඉතා වැදගත් වේ. මෙම පියවර ප්‍රවේශමෙන් අනුගමනය කරන්න.

4.1 පූර්ව ස්ථාපන පිරික්සුම් ලැයිස්තුව

4.2 ස්ථාපන පියවර

  1. පොම්පය ස්ථානගත කිරීම: Place the pump on a stable, flat surface in the lowest part of the area to be drained. Ensure the suction grille is not obstructed. The minimum admission level is 38 mm.
  2. Connecting the Discharge Pipe: Attach a suitable discharge pipe to the pump's outlet. Ensure all connections are watertight. The pump has a 1 1/4" G threaded outlet.
  3. Float Switch Adjustment (for automatic versions): Adjust the float switch cable length to set the desired ON/OFF levels. Ensure the float can move freely without obstruction.
  4. බල සම්බන්ධතාවය: Connect the pump to a grounded electrical outlet. Ensure the circuit is protected by a residual current device (RCD).
  5. පරීක්ෂා කිරීම: Before full operation, perform a test run to ensure the pump activates and deactivates correctly and that there are no leaks.

For detailed technical specifications and installation diagrams, refer to the official technical sheet: DAB FEKA Technical Sheet.

5. මෙහෙයුම් උපදෙස්

The DAB FEKA 600 MA pump is designed for straightforward operation.

5.1 Automatic Operation (with float switch)

  1. Ensure the pump is properly installed and connected to power.
  2. ජල මට්ටම ඉහළ ගොස් පාවෙන ස්විචය ඔසවන විට පොම්පය ස්වයංක්‍රීයව ක්‍රියාත්මක වේ.
  3. The pump will automatically stop when the water level drops and the float switch returns to its lower position.

5.2 Manual Operation (without float switch or for specific tasks)

For manual versions or when bypassing the float switch:

  1. Connect the pump to power. The pump will begin operating immediately.
  2. Monitor the water level to prevent the pump from running dry for extended periods. The pump can run dry for up to 1 minute without damage.
  3. Disconnect the pump from power to stop operation.

වැදගත්: Do not allow the pump to run dry for more than 1 minute. Prolonged dry running can cause damage.

6. නඩත්තු කිරීම

Regular maintenance ensures optimal performance and extends the pump's lifespan. Always disconnect the pump from the power supply before any maintenance.

6.1 පොම්පය පිරිසිදු කිරීම

6.2 ශීත ගබඩා

If the pump will not be used for an extended period or during freezing temperatures:

6.3 වෘත්තීය සේවා

For internal components, motor, or seal inspection, it is recommended to contact a qualified service technician. Do not attempt to disassemble the motor housing.

7. දෝශ නිරාකරණය

සහාය සම්බන්ධ කර ගැනීමට පෙර, නැවතview පහත දැක්වෙන පොදු ගැටළු සහ ඒවාට විසඳුම්.

ගැටලුවවිය හැකි හේතුවවිසඳුම
පොම්පය ආරම්භ නොවේ.බල සැපයුමක් නැත.
Float switch stuck (automatic version).
තාප අධි බර ආරක්ෂණය සක්රිය කර ඇත.
බල සම්බන්ධතාවය සහ පරිපථ කඩනය පරීක්ෂා කරන්න.
Clear any obstructions around the float switch.
Allow pump to cool down; it should reset automatically.
පොම්පය ක්‍රියාත්මක වන නමුත් ජලය බැහැර නොකෙරේ.Suction grille blocked.
Discharge pipe blocked or kinked.
පොම්පයේ වායු අගුල.
Disconnect power and clear the suction grille.
Check and clear the discharge pipe.
Submerge the pump completely and shake gently to release air.
පොම්පය නිතර නිතර සක්‍රිය සහ අක්‍රිය වේ.Float switch incorrectly adjusted.
Insufficient water volume.
Adjust float switch to allow for a larger water level differential.
Ensure adequate water volume for continuous operation.
අඩු කළ ප්‍රවාහ අනුපාතය.Partial blockage in suction or discharge.
Pump wear.
Clean suction grille and check discharge pipe.
පරීක්ෂා කිරීම සඳහා සුදුසුකම් ලත් සේවා පුද්ගලයින් අමතන්න.

8. තාක්ෂණික පිරිවිතර

Detailed specifications for the DAB FEKA 600 MA pump.

පරාමිතියවටිනාකම
ආකෘතියFEKA 600 MA
බලය0.70 HP
වෙළුමtage230 V (2.3E+2 Volts)
උපරිම ප්රවාහ අනුපාතය16 m³/h (16,000 liters/hour)
උපරිම හිසමීටර් 7.5
උපරිම ගිල්වීමේ ගැඹුරමීටර් 7
Pumped Liquid TypeWastewater and Rainwater
Free Passage of Solids25 මි.මී
Min Admission Level38 මි.මී
දියර උෂ්ණත්ව පරාසය+0°C to +35°C (domestic use)
+0°C to +50°C (other uses)
ආරක්ෂණ පන්තියIP 68
ද්රව්යTechnopolymer body, Stainless Steel motor (AISI 304), Steel shaft (AISI 431)
මානයන් (ආසන්න වශයෙන්)43.4 x 26 x 19.8 සෙ.මී. (පැකේජය)
43 x 21 x 29 cm (Pump)
බර (ආසන්න වශයෙන්)කිලෝ ග්රෑම් 6.24 කි

For complete technical details, please refer to the official product documentation provided by DAB PUMPS.

9. වගකීම් සහ සහාය

නිෂ්පාදන වගකීම් සහ පාරිභෝගික සහාය පිළිබඳ තොරතුරු.

9.1 වගකීම් තොරතුරු

Specific warranty terms and conditions are typically provided with your purchase documentation or can be found on the manufacturer's official webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා කරුණාකර ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

9.2 පාරිභෝගික සහාය

For technical assistance, spare parts, or service inquiries, please contact your authorized DAB PUMPS dealer or visit the official DAB PUMPS webසම්බන්ධතා තොරතුරු සඳහා අඩවිය.

Official commercial profile of the Feka range: DAB FEKA Commercial Profile.

අදාළ ලියකියවිලි - FEKA600

පෙරview DAB FEKA 600 Submersible Sewage Pump - Technical Specifications and Performance
Explore the DAB FEKA 600 submersible sewage pump. This document provides comprehensive technical data, performance curves, material specifications, electrical details, and dimensions for domestic wastewater applications.
පෙරview DAB FEKA VS: Pompe Sommergibili per Acque Reflue e Meteoriche
Scopri le pompe sommergibili DAB FEKA VS, ideali per il sollevamento di acque reflue e meteoriche in contesti domestici, residenziali e commerciali. Realizzate in acciaio inossidabile, offrono alta efficienza e affidabilità.
පෙරview Guía Rápida de Selección de Bombas DAB: Encuentre la Solución Ideal
Descubra la guía rápida de selección de bombas DAB para applicaciones domesticas, industryes y de riego. Encuentre la bomba perfecta para sus necesidades de agua, desde suministro hasta gestión de aguas residuales.
පෙරview NOVA UP MAE - Manuale di Installazione e Manutenzione DAB
Manuale completo per l'installazione, l'uso e la manutenzione della pompa sommergibile DAB NOVA UP MAE. Include dati tecnici, avvertenze di sicurezza e guida alla risoluzione dei problemi.
පෙරview DAB Pulsar Dry Submersible Pump Quick Start Guide
Concise guide for installing and operating the DAB Pulsar Dry submersible pump, including technical specifications, safety precautions, and connection details.
පෙරview Manuale di Installazione e Manutenzione DAB DIVERTRON
Guida completa per l'installazione, il funzionamento e la manutenzione delle pompe sommergibili DAB DIVERTRON, inclusi consigli tecnici e risoluzione problemi.