ශ්‍රව්‍ය පද්ධතිය US08 නිෂ්ක්‍රීය ආසන යට සබ්වෝෆර් පරිශීලක අත්පොත

නිෂ්පාදනය අවසන්view

The Audio System US08 is a compact and powerful passive under-seat subwoofer designed to enhance the bass response in your vehicle's audio system. It features an extremely heavy die-cast aluminum housing, contributing to its robust build and acoustic performance. With a weight of 6.0 kg, this subwoofer is engineered for durability and efficient sound delivery.

Key features include two passive membranes on both sides, optimizing its low-frequency output. It operates within a frequency range of 20-150 Hz and offers flexible impedance options of 2 ohms or 4 ohms, making it compatible with various amplifier setups. The US08 delivers a maximum power output of 400 Watts, providing deep and impactful bass.

Its compact dimensions (approximately 345mm length x 70mm height x 250mm depth) allow for convenient installation under most car seats, saving valuable trunk space.

වැදගත් ආරක්ෂක තොරතුරු

Please read all safety instructions carefully before installing and operating the Audio System US08 subwoofer. Failure to follow these guidelines may result in injury, damage to the product, or damage to your vehicle.

• විදුලි විසන්ධි වීම වැළැක්වීම සඳහා ඕනෑම ස්ථාපන කාර්යයක් ආරම්භ කිරීමට පෙර සෑම විටම වාහනයේ බැටරි ඍණ අග්‍රය විසන්ධි කරන්න.
• කෙටි පරිපථ සහ ගිනි උවදුරු වැළැක්වීම සඳහා සියලුම රැහැන් සම්බන්ධතා ආරක්ෂිතව සහ නිසි ලෙස පරිවරණය කර ඇති බවට සහතික වන්න.
• Do not install the subwoofer in locations where it may obstruct vehicle controls, airbags, or passenger movement.
• Avoid exposing the subwoofer to excessive moisture, dust, or extreme temperatures.
• If you are unsure about any part of the installation process, seek professional assistance from a qualified car audio technician.
• Operate the subwoofer within its specified power ratings to prevent damage.

පැකේජයේ අන්තර්ගතය

ස්ථාපනය සමඟ ඉදිරියට යාමට පෙර සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කර ගන්න:

• Audio System US08 Passive Under-Seat Subwoofer
• සවි කිරීමේ දෘඩාංග (වරහන්, ඉස්කුරුප්පු)
• පරිශීලක අත්පොත (මෙම ලේඛනය)

ස්ථාපන මාර්ගෝපදේශය

1 ස්ථාපනය කිරීමට පෙර

• Choose a suitable mounting location, typically under a front seat, ensuring adequate clearance and ventilation.
• Ensure the chosen location does not interfere with seat movement, wiring, or other vehicle components.
• Gather all necessary tools: wire strippers, crimpers, screwdrivers, drill (if needed for mounting).
• වාහනයේ ඍණ බැටරි පර්යන්තය විසන්ධි කරන්න.

2. සබ් වූෆර් සවි කිරීම

The US08 is designed for under-seat installation. Use the provided mounting brackets and screws to secure the subwoofer firmly to the vehicle's floor. Ensure the mounting surface is strong enough to support the subwoofer's weight (6.0 kg) and withstand vehicle vibrations.

රූපය 1: ඉදිරිපස view of the US08 subwoofer, showing the main speaker grille and Audio System logo.

රූපය 2: පසුපස view of the US08 subwoofer, illustrating the mounting points and heat dissipation fins.

රූපය 3: පැති ගැතිfile of the US08 subwoofer, highlighting its slim design suitable for under-seat placement.

Refer to Figure 2 for the location of the mounting points on the subwoofer's chassis. Mark the drilling locations on the vehicle floor, drill pilot holes if necessary, and secure the subwoofer using appropriate fasteners.

3. රැහැන් සම්බන්ධතා

The US08 is a passive subwoofer and requires an external amplifier (not included) for operation. Ensure your amplifier is capable of driving a 2-ohm or 4-ohm load, depending on how you configure the subwoofer's impedance (if selectable, though the description implies it supports both). Connect the subwoofer to the amplifier's subwoofer output terminals using high-quality speaker wire.

• ධනාත්මක (+) සම්බන්ධතාවය: Connect the positive terminal of the subwoofer to the positive output terminal of your ampජීවිතාරක්ෂකයා.
• සෘණ (-) සම්බන්ධතාවය: Connect the negative terminal of the subwoofer to the negative output terminal of your ampජීවිතාරක්ෂකයා.
• Ensure all connections are tight and free from frayed wires that could cause short circuits.
• Route all wiring safely, away from moving parts, sharp edges, and heat sources.

ඔබේ සබ් වූෆර් ක්‍රියාත්මක කිරීම

Once the subwoofer is correctly installed and wired to an amplifier, you can begin operating your audio system. The performance of the US08 will depend on the settings of your external amplifier සහ ප්රධාන ඒකකය.

• මූලික බල-සක්‍රිය: After reconnecting the vehicle's battery, turn on your car's audio system.
• Amplifier සැකසුම්: Adjust the gain, low-pass filter (LPF), and phase settings on your amplifier to achieve optimal sound integration with your main speakers. A typical LPF setting for a subwoofer is between 80Hz and 120Hz.
• ශබ්ද සුසර කිරීම: Play various types of music to fine-tune the subwoofer's output. Aim for a balanced sound where the bass blends seamlessly with the rest of your audio system, rather than overpowering it.

නඩත්තු කිරීම සහ රැකවරණය

Proper maintenance ensures the longevity and optimal performance of your Audio System US08 subwoofer.

• පිරිසිදු කිරීම: Use a soft, dry cloth to wipe down the exterior of the subwoofer. Do not use harsh chemicals, solvents, or abrasive cleaners.
• වාතාශ්රය: Ensure the subwoofer's heat dissipation fins (visible in Figure 2 and 3) are not obstructed to allow for proper airflow and prevent overheating.
• සම්බන්ධතා: සියලුම රැහැන් සම්බන්ධතා ආරක්ෂිතව සහ විඛාදනයෙන් තොරව පවතින බව සහතික කිරීම සඳහා වරින් වර පරීක්ෂා කරන්න.
• ගබඩා: If storing the subwoofer for an extended period, keep it in a cool, dry place away from direct sunlight and extreme temperatures.

දෝෂගවේෂණය

If you experience issues with your Audio System US08 subwoofer, refer to the table below for common problems and their solutions.

තාක්ෂණික පිරිවිතර

වගකීම් සහ පාරිභෝගික සහාය

Audio System products are manufactured to the highest quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your purchase or visit the official Audio System webඅඩවිය.

If you encounter any issues not covered in this manual or require further assistance, please contact Audio System customer support. Have your product model number (US08) and purchase details ready when contacting support.