1. නිෂ්පාදන අවසන්view
The VIVOTEK FD9360-H is a high-performance H.265 outdoor dome network camera designed for robust surveillance applications. It features a 2-Megapixel sensor, delivering clear resolution of 1920x1080 at 30 frames per second. Equipped with VIVOTEK's SNV (Supreme Night Visibility) and WDR Pro (Wide Dynamic Range Pro) technologies, this camera excels in capturing high-quality imagery across various lighting conditions, including high contrast and low light environments. The FD9360-H utilizes a 2.8mm lens and integrates IR illuminators for enhanced night vision capabilities, making it suitable for continuous outdoor monitoring.
Figure 1: VIVOTEK FD9360-HF2 2MP IR Outdoor Fixed Dome Network Camera. This image shows the white dome-shaped camera with the VIVOTEK logo on top. The clear dome cover reveals the camera lens and infrared LEDs inside. A white cable extends from the back of the camera, ending in an RJ45 connector.
2. පැකේජ අන්තර්ගතය
පහත ලැයිස්තුගත කර ඇති සියලුම අයිතම ඔබේ පැකේජයට ඇතුළත් කර ඇති බව කරුණාකර සත්යාපනය කරන්න. කිසියම් අයිතමයක් අස්ථානගත වී හෝ හානි වී ඇත්නම්, වහාම ඔබේ වෙළෙන්දා අමතන්න.
- VIVOTEK FD9360-HF2 Network Camera
- සවිකරන අච්චුව
- සවි කරන ඉස්කුරුප්පු සහ බිත්ති නැංගුරම්
- ජල ආරක්ෂිත සම්බන්ධක කට්ටලය
- ඉක්මන් ස්ථාපන මාර්ගෝපදේශය
- Software CD (or link to download)
3. පිහිටුවීම සහ ස්ථාපනය
Proper installation is crucial for optimal performance and longevity of your camera. Ensure you have the necessary tools and safety equipment before beginning.
3.1 අඩවි තේරීම
අපේක්ෂිත ක්ෂේත්රය සපයන සවි කිරීමේ ස්ථානයක් තෝරන්න view, is within range of your network infrastructure, and offers protection from direct impact or vandalism. The camera is rated IP65 for outdoor use.
3.2 කැමරාව සවි කිරීම
- මතුපිට සකස් කරන්න: Use the provided mounting template to mark drill holes on the ceiling or wall.
- සිදුරු සිදුරු: Drill pilot holes for the mounting screws and insert wall anchors if necessary.
- පදනම සුරක්ෂිත කරන්න: Attach the camera's mounting base to the surface using the screws. Ensure it is firmly secured.
- කේබල් කළමනාකරණය: Route the network cable through the designated opening in the mounting base.
3.3 Network and Power Connection
- ඊතර්නෙට් සම්බන්ධතාවය: Connect an RJ45 Ethernet cable to the camera's network port. For outdoor installations, use the waterproof connector kit to ensure a sealed connection.
- ඊතර්නෙට් හරහා බලය (PoE): The FD9360-HF2 supports PoE, simplifying installation by delivering both power and data over a single Ethernet cable. Connect the Ethernet cable to a PoE-enabled switch or injector.
- Alternative Power (if applicable): If PoE is not used, connect a 12V DC power adapter (not included) to the camera's power input.
3.4 මූලික වින්යාසය
After physical installation, connect to the camera via your network. Refer to the Quick Installation Guide or the full user manual (available on the VIVOTEK website) for detailed instructions on IP address discovery and initial setup using VIVOTEK's utility software.
4. කැමරාව ක්රියාත්මක කිරීම
Once configured, the camera can be accessed and managed through a web browser or compatible VMS (Video Management Software).
4.1 වෙත ප්රවේශ වීම Web අතුරු මුහුණත
- a විවෘත කරන්න web බ්රවුසරය (උදා: ක්රෝම්, ෆයර්ෆොක්ස්).
- Enter the camera's IP address in the address bar and press Enter.
- Log in using the default credentials (refer to your Quick Installation Guide for default username and password, and change them immediately for security).
4.2 ප්රධාන විශේෂාංග සහ සැකසුම්
- සජීවීව View: Monitor real-time video feed.
- පටිගත කිරීමේ සැකසුම්: Configure continuous, motion-triggered, or scheduled recording to a network video recorder (NVR) or local storage (if supported).
- රූප සැකසීම්: Adjust brightness, contrast, saturation, sharpness, and enable/disable WDR Pro and SNV for optimal image quality in varying light conditions.
- IR ආලෝකකරණ: The built-in IR illuminators automatically activate in low light to provide clear black and white images in complete darkness.
- චලන හඳුනාගැනීම: Set up motion detection zones and sensitivity for event-triggered recording and alerts.
- ජාල සැකසීම්: Configure IP address, DNS, and other network parameters.
5. නඩත්තු කිරීම
Regular maintenance ensures the longevity and optimal performance of your VIVOTEK camera.
- පිරිසිදු කිරීම: Periodically clean the camera's dome cover with a soft, damp cloth. Avoid abrasive cleaners that could scratch the surface. Ensure the lens is free of dust and smudges.
- ස්ථිරාංග යාවත්කාලීන කිරීම්: Check the VIVOTEK official website regularly for firmware updates. Updating firmware can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided by VIVOTEK for firmware upgrade procedures.
- කේබල් පරීක්ෂාව: Periodically inspect all cables for signs of wear, damage, or corrosion, especially for outdoor installations.
- පාරිසරික පරීක්ෂාව: Ensure the camera's environment remains within its specified operating temperature and humidity ranges.
6. දෝශ නිරාකරණය
This section addresses common issues you might encounter with your VIVOTEK FD9360-HF2 camera.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| No Power/Camera Not Turning On | No PoE connection; faulty power adapter; damaged cable. | Verify PoE switch/injector is active. Check power adapter and cable connections. Test with a known good power source. |
| වීඩියෝ සංග්රහයක් නැත | Network connectivity issue; incorrect IP address; firewall blocking. | Check network cable. Ping camera's IP address. Ensure camera and viewing device are on the same network segment. Disable temporary firewalls. |
| Poor Image Quality (Blurry/Dark) | Dirty lens/dome; improper focus (if adjustable); insufficient lighting; incorrect image settings. | Clean the dome and lens. Adjust image settings (brightness, contrast, WDR Pro, SNV). Ensure adequate lighting or proper IR operation. |
| ප්රවේශ විය නොහැක Web අතුරු මුහුණත | Incorrect IP address; network conflict; browser compatibility. | Confirm camera's IP address. Check for IP conflicts on your network. Try a different web බ්රව්සරය. බ්රව්සර් හැඹිලිය හිස් කරන්න. |
For more complex issues, refer to the full user manual or contact VIVOTEK technical support.
7. පිරිවිතර
Key technical specifications for the VIVOTEK FD9360-HF2 camera:
- ආකෘතිය: FD9360-HF2
- Effective Video Resolution: 2 MP (1920x1080)
- රාමු අනුපාතය: 30 fps
- කාච: 2.8mm (ස්ථාවර)
- සම්බන්ධතා තාක්ෂණය: Wireless (Wi-Fi) and Wired (RJ45)
- බලශක්ති ප්රභවය: AC/DC, supports Power over Ethernet (PoE)
- ගෘහස්ථ/ එළිමහන් භාවිතය: එළිමහන්
- ජාත්යන්තර ආරක්ෂණ ශ්රේණිගත කිරීම: IP65
- අඩු ආලෝක තාක්ෂණය: Day/Night with IR Illuminators, SNV, WDR Pro
- මානයන් (L x W x H): අඟල් 4.61 x 4.61 x 3.53
- අයිතමයේ බර: අවුන්ස 0.01 කි
- වට්tage: වොට් 9.5 යි
- UPC: 745560774694
8. වගකීම් සහ සහාය
VIVOTEK products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VIVOTEK webඅඩවිය.
For technical assistance, product inquiries, or support, please contact VIVOTEK customer service or visit their support portal:
- VIVOTEK Official Webඅඩවිය: www.vivotek.com
- ආධාරක ද්වාරය: වෙත යොමු කරන්න website for regional support contacts and resources.
