MOUNTUP MU0025

MOUNTUP Monitor Mount Instruction Manual

මාදිලිය: MU0025 | වෙළඳ නාමය: MOUNTUP

1. හැඳින්වීම

Thank you for choosing the MOUNTUP Single Computer Monitor Stand. This full motion gas spring desk monitor arm is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor. It is compatible with most flat and curved computer monitors from 17 to 32 inches, supporting a maximum weight of 17.6 lbs. This manual will guide you through the installation, operation, and maintenance of your new monitor mount.

2 ආරක්ෂිත තොරතුරු

Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage. If you have any questions, please contact MOUNTUP customer support.

  • උපරිම බර ධාරිතාව රාත්තල් 17.6 (කිලෝග්‍රෑම් 8) නොඉක්මවන්න.
  • Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitor.
  • Always keep the arm in a horizontal position during gas spring tension adjustment to prevent injury or damage.
  • Use all provided hardware and follow the installation steps precisely.
  • ස්ථාපනය අතරතුර ළමුන් සහ සුරතල් සතුන් ඈත් කර තබන්න.

3. ඇසුරුම් ලැයිස්තුව

ස්ථාපනය ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බවත් හානි වී නොමැති බවත් තහවුරු කර ගන්න.

MOUNTUP Monitor Mount Features: Easy to Assemble, Max 32 inch screen, 4.4-17.6 lbs load capacity, VESA 75x75/100x100 compatible.

Figure 3.1: Key features and compatibility of the MOUNTUP monitor mount.

පැකේජයට ඇතුළත් විය යුතුය:

  • Monitor Arm Assembly (Upper and Lower Arms)
  • Desk Pole
  • සී-ක්ලබ්amp පදනම
  • ග්‍රෝමට් මූලික සංරචක
  • වීසා තහඩුව
  • All necessary screws, washers, and Allen keys
  • උපදෙස් අත්පොත

4. පිහිටුවීම සහ ස්ථාපනය

Choose between C-Clamp or Grommet mounting based on your desk type and preference.

Two mounting options for the MOUNTUP monitor mount: C-Clamp Mounting for desk thickness 0.39-3.15 inches, and Grommet Mounting for desk thickness 0.39-3.15 inches and hole diameter 0.39-2.36 inches.

Figure 4.1: The monitor mount offers both C-Clamp සහ Grommet සවි කිරීමේ විකල්ප.

4.1 C-Clamp ස්ථාපනය

  1. C-cl එක අමුණන්නamp base to the desk pole using the provided screws and Allen key.
  2. Position the assembled clamp and pole on the edge of your desk.
  3. C-cl එක තද කරන්නamp මේසයට සවි කිරීම ආරක්ෂිතව සවි කරන තුරු ඉස්කුරුප්පු කරන්න. එය ස්ථාවර බවත් සෙලවෙන්නේ නැති බවත් සහතික කර ගන්න.

4.2 Grommet Installation

  1. Disassemble the C-clamp by removing the screw and plate.
  2. Insert the desk pole through the grommet hole in your desk.
  3. Secure the pole from underneath the desk using the grommet base plate and tightening knob.

4.3 Attaching VESA Plate to Monitor

  1. ඔබේ මොනිටරය මෘදු, පිරිසිදු මතුපිටක් මත ප්‍රවේශමෙන් මුහුණත පහළට තබන්න.
  2. Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm).
  3. Secure the VESA plate to the monitor using the appropriate screws. Do not overtighten.

4.4 Attaching Monitor to Arm

  1. Slide the VESA plate with the attached monitor onto the monitor arm's mounting head.
  2. Ensure the monitor is fully seated and then tighten the security bolt to prevent accidental detachment.

4.5 කේබල් කළමනාකරණය

Route your monitor cables through the integrated cable management clips on the arm and pole to maintain a tidy workspace.

Monitor cables routed neatly through the arm's cable management system.

Figure 4.2: Effective cable management keeps your desk organized.

4.6 ස්ථාපන වීඩියෝ මාර්ගෝපදේශය

Video 4.1: A detailed installation guide for the MOUNTUP Single Monitor Mount (MU0025).

5. මෙහෙයුම් සහ ගැලපීම්

The MOUNTUP monitor arm offers full motion capabilities for optimal viewසැනසිල්ල.

Diagram showing full range motion of the monitor arm including swivel, tilt, and rotation for sitting or standing positions.

Figure 5.1: The monitor arm provides extensive adjustability for ergonomic positioning.

5.1 ගෑස් වසන්ත ආතති ගැලපීම

Adjust the gas spring tension to match your monitor's weight for smooth and stable positioning. Keep the arm in a horizontal position during adjustment.

Instructions for adjusting gas spring tension: turn counter-clockwise to increase tension for heavier monitors, turn clockwise to reduce tension for lighter monitors.

Figure 5.2: Adjusting the gas spring tension for optimal monitor support.

  • If the arm shoots up: Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
  • If the arm falls down: Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.

5.2 ඇල ගැලපීම

The monitor can tilt +90° (up) and -45° (down) to reduce glare and optimize viewing කෝණ.

  • Loosen the tilting bolt on the VESA plate.
  • Position the screen to your desired angle.
  • Retighten the tilting bolt to fix the angle.

5.3 භ්‍රමණය සහ භ්‍රමණය

The arm allows for extensive swivel and 360° rotation for landscape or portrait orientation.

A monitor mounted on the arm, demonstrating 360-degree rotation from landscape to portrait mode.

Figure 5.3: Achieve perfect viewing angles with 360-degree rotation.

  • Lower Arm Swivel: ±135°
  • Upper Arm Swivel: ±180°
  • Screen Swivel: ±90°
  • Screen Rotation: 360°

5.4 Adjustment Video Guide

Video 5.1: Guide to Gas Spring Tension & Tilting Adjustment for MOUNTUP Monitor Mount (MU0025).

Video 5.2: Demonstration of the MOUNTUP Single Monitor Desk Mount (MU0025) functions.

6. නඩත්තු කිරීම

Regular maintenance ensures the longevity and optimal performance of your monitor mount.

  • පිරිසිදු කිරීම: මෘදු, d රෙදි කැබැල්ලකින් මවුන්ට් එක පිස දමන්න.amp රෙදි. නිමාවට හානි කළ හැකි උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක වලින් වළකින්න.
  • පරීක්ෂාව: Periodically check all screws and connections to ensure they are tight and secure. Retighten if necessary.
  • ගෑස් ස්ප්‍රින්ග්: If the gas spring tension feels off, refer to Section 5.1 for adjustment instructions.

7. දෝශ නිරාකරණය

ඔබට කිසියම් ගැටළුවක් ඇති වුවහොත්, පහත සඳහන් පොදු ගැටළු සහ විසඳුම් වෙත යොමු වන්න:

  • Monitor arm falls down or shoots up: This indicates incorrect gas spring tension. Refer to Section 5.1 for proper adjustment based on your monitor's weight.
  • Monitor tilts forward or backward unexpectedly: The tilting bolt may be loose. Refer to Section 5.2 to loosen, adjust, and retighten the tilting bolt.
  • Mount feels unstable or wobbly: C-cl සහතික කරන්නamp or grommet base is securely tightened to the desk. Check all connection points on the arm and VESA plate.
  • Difficulty moving the arm: The tension might be too high for a lighter monitor, or the joints might need lubrication (though typically not required for gas spring arms). Ensure no cables are snagged.

ගැටළු දිගටම පවතින්නේ නම්, කරුණාකර පාරිභෝගික සහාය අමතන්න.

8. පිරිවිතර

විශේෂාංගයපිරිවිතර
ආදර්ශ අංකයMU0025
ගැළපෙන තිර ප්‍රමාණයඅඟල් 17 සිට 32 දක්වා
බර ධාරිතාවරාත්තල් 4.4 - 17.6 (කිලෝග්‍රෑම් 2 - 8)
VESA අනුකූලතාව75x75mm, 100x100mm
සවිකිරීමේ වර්ගයසී-ක්ලබ්amp / Grommet Base
සී-ක්ලබ්amp මේසයේ ඝණකම0.39" - 3.15" (මි.මී. 10-80)
ග්‍රෝමට් මේස ඝණකම0.39" - 3.15" (මි.මී. 10-80)
ග්‍රෝමට් සිදුරු විෂ්කම්භය0.39" - 2.36" (මි.මී. 10-60)
ද්රව්යවානේ, ඇලුමිනියම්, ප්ලාස්ටික්
වර්ණයකළු
Max Height (from desk)22.64" (සෙ.මී. 57.5)
උපරිම දිගුව19.8" (සෙ.මී. 50.3)
ඇල පරාසය+90° / -45°
තිර Swivel±90°
තිර භ්රමණය360°

9. වගකීම් සහ සහාය

All MOUNTUP monitor mounts are backed by 3-year support. Our friendly customer support team is available to answer any questions within 12 hours. For assistance, please visit the official MOUNTUP website or contact us directly through your purchase platform.

අදාළ ලියකියවිලි - MU0025

පෙරview උස වෙනස් කළ හැකි තනි මොනිටර මේස සවිකිරීමේ උපදෙස් අත්පොත
MOUNTUP උස සකස් කළ හැකි තනි මොනිටර මේස සවිකිරීම සඳහා උපදෙස් අත්පොත. මෙම ගෑස් වසන්ත මොනිටර හස්තය සඳහා සවිස්තරාත්මක එකලස් කිරීමේ පියවර, පැකේජ අන්තර්ගතය, ආරක්ෂක අනතුරු ඇඟවීම් සහ ගැලපුම් මාර්ගෝපදේශ සපයන අතර, VESA අනුකූල මොනිටර සඳහා සහය දක්වයි.
පෙරview MOUNTUP තනි මොනිටර් මේස සවිකිරීමේ උපදෙස් අත්පොත
MOUNTUP තනි මොනිටර මේස සවිකිරීම සඳහා සවිස්තරාත්මක උපදෙස් අත්පොත, VESA-අනුකූල මොනිටර සඳහා එකලස් කිරීම, ස්ථාපනය, ගැලපීම් සහ නඩත්තුව විස්තර කරයි.
පෙරview වාරික තනි මොනිටර ස්ථාවර උපදෙස් අත්පොත - MOUNTUP Y100-US2.0
ආරක්ෂාව, පැකේජ අන්තර්ගතය, එකලස් කිරීමේ පියවර, ගැලපීම් සහ මානයන් ආවරණය වන පරිදි MOUNTUP වාරික තනි මොනිටර් ස්ටෑන්ඩ් (ආකෘතිය Y100-US2.0) සඳහා සවිස්තරාත්මක උපදෙස් අත්පොත. බර ධාරිතාව රාත්තල් 4.4-33 ක් වන VESA 75x75mm සහ 100x100mm සඳහා සහය දක්වයි.
පෙරview MOUNTUP වාරික තනි මොනිටර ස්ථාවර ස්ථාපන මාර්ගෝපදේශය
MOUNTUP වාරික තනි මොනිටර ස්ථාවරය සඳහා සවිස්තරාත්මක උපදෙස් අත්පොත. ආවරණ clamp සහ ග්‍රෝමට් පාදක ස්ථාපනය, බාහු එකලස් කිරීම, මොනිටර සවි කිරීම, ගෑස් ස්ප්‍රින්ග් ආතති ගැලපීම, කේබල් කළමනාකරණය සහ අවසාන ස්ථානගත කිරීම. ආරක්ෂක අනතුරු ඇඟවීම් සහ නඩත්තු උපදෙස් ඇතුළත් වේ.
පෙරview MOUNTUP ද්විත්ව මොනිටර ස්ථාවර ස්ථාපන මාර්ගෝපදේශය (MU0005)
MOUNTUP MU0005 ද්විත්ව මොනිටර ස්ථාවරය සඳහා සවිස්තරාත්මක ස්ථාපන උපදෙස්, ගෑස් ස්ප්‍රින්ග් ගැලපුම, VESA අනුකූලතාව සහ ද්විත්ව සවි කිරීමේ විකල්ප (cl) ඇතුළත් වේ.amp/ග්‍රොමට්).
පෙරview MOUNTUP තනි මොනිටර මේස සවිකිරීමේ උපදෙස් අත්පොත YZ2216-US3.0
MOUNTUP YZ2216-US3.0 තනි මොනිටර මේස සවිකිරීම සඳහා සවිස්තරාත්මක උපදෙස් අත්පොත, ගෑස් ස්ප්‍රින්ග් මොනිටර ආයුධ සඳහා එකලස් කිරීම, ස්ථාපනය කිරීම සහ ගැලපුම් ක්‍රියා පටිපාටි විස්තර කරයි. නිෂ්පාදන මානයන්, පැකේජ අන්තර්ගතය සහ පියවරෙන් පියවර මාර්ගෝපදේශ ඇතුළත් වේ.