Pyramid Plastics Kawasaki Ninja 250R Hugger Installation and Maintenance Manual

1. හැඳින්වීම

This manual provides detailed instructions for the proper installation, operation, and maintenance of your Pyramid Plastics Rear Hugger for the Kawasaki Ninja 250R (2008-2013 models). This product is designed to protect the rear shock absorber, undertray, and other components from road debris, water spray, and dirt, enhancing the longevity and cleanliness of your motorcycle.

Please read this manual thoroughly before beginning installation to ensure correct fitting and to prevent damage to the product or your motorcycle. Keep this manual for future reference.

2 ආරක්ෂිත තොරතුරු

ස්ථාපනය සහ නඩත්තු කිරීමේදී සෑම විටම පහත සඳහන් ආරක්ෂක පියවරයන් නිරීක්ෂණය කරන්න:

• Ensure the motorcycle is stable and securely supported on a stand before commencing any work.
• Allow the engine and exhaust system to cool down completely before touching any components to avoid burns.
• අත්වැසුම් සහ අක්ෂි ආරක්ෂාව ඇතුළු සුදුසු පුද්ගලික ආරක්ෂක උපකරණ පළඳින්න.
• Use the correct tools for each step to prevent damage to fasteners or components.
• ඔබට කිසියම් පියවරක් ගැන සැකයක් ඇත්නම්, සුදුසුකම් ලත් යතුරුපැදි කාර්මිකයෙකුගෙන් විමසන්න.
• Do not modify the product or motorcycle components in any way not described in this manual.
• Keep all small parts and tools away from children and pets.

3. පැකේජ අන්තර්ගතය

Before installation, verify that all components are present and undamaged. If any parts are missing or damaged, contact your supplier immediately.

• 1x Pyramid Plastics Rear Hugger (Model 07301B)
• 1x Fitting Kit (includes bolts, washers, spacers, and any necessary brackets)
• 1x ස්ථාපන උපදෙස් (මෙම අත්පොත)

Image 3.1: Main component of the Pyramid Plastics Rear Hugger, Gloss Black finish.

4. ස්ථාපන මාර්ගෝපදේශය

This section outlines the steps required to install the Pyramid Plastics Rear Hugger on your Kawasaki Ninja 250R. Ensure you have all necessary tools before starting.

අවශ්ය මෙවලම්:

• සොකට් රෙන්ච් සෙට්
• හෙක්ස් යතුරු කට්ටලය (ඇලන් යතුර)
• Torque Wrench (recommended)
• පිරිසිදු රෙදි
• යතුරුපැදි ස්ථාවරය

ස්ථාපන පියවර:

1. යතුරුපැදිය සූදානම් කරන්න: Place your Kawasaki Ninja 250R on a suitable stand to lift the rear wheel off the ground. Ensure the motorcycle is stable. Allow the exhaust to cool.
2. සවිකිරීමේ ස්ථාන සොයා ගන්න: Identify the existing mounting points on the swingarm or chain guard area where the hugger will attach. These typically involve existing bolt holes.
3. ප්‍රදේශය පිරිසිදු කරන්න: Thoroughly clean the swingarm, chain guard, and surrounding areas to remove any dirt, grease, or debris. This ensures a clean fit and prevents contamination.
4. Position the Hugger: Carefully position the Pyramid Plastics hugger against the swingarm, aligning its mounting holes with the motorcycle's attachment points.
5. ගාංචු ස්ථාපනය කරන්න: Using the provided fitting kit, insert the bolts with appropriate washers and spacers through the hugger's mounting holes and into the motorcycle's attachment points. Do not fully tighten yet.
6. සකස් කර පෙළගස්වන්න: Gently adjust the hugger to ensure it is centered and has adequate clearance from the tire, chain, and any moving parts. Ensure there is no contact with the tire at full suspension compression.
7. ගාංචු තද කරන්න: Once properly aligned, progressively tighten all fasteners. Refer to your motorcycle's service manual for specific torque specifications for the mounting points, if available. Do not overtighten.
8. අවසාන පරීක්ෂාව: After tightening, visually inspect the hugger for secure attachment, proper alignment, and sufficient clearance. Rotate the rear wheel manually to confirm no rubbing or interference.

රූපය 4.1: උදාample of a rear hugger properly installed, showing clearance around the tire and chain.

5. නඩත්තු කිරීම

Regular maintenance of your Pyramid Plastics Rear Hugger will ensure its longevity and continued performance.

• පිරිසිදු කිරීම: Clean the hugger regularly with mild soap and water, using a soft cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• පරීක්ෂාව: Periodically check all mounting bolts for tightness. Vibrations from riding can sometimes loosen fasteners. Inspect the hugger for any signs of cracks, damage, or excessive wear.
• නිෂ්කාශන පරීක්ෂාව: Ensure the hugger maintains adequate clearance from the tire and chain, especially after long rides or if the suspension has been adjusted.
• හානිය: If the hugger sustains significant damage, consider replacing it to maintain optimal protection and aesthetic appeal.

6. දෝශ නිරාකරණය

මෙන්න පොදු ගැටළු කිහිපයක් සහ ඒවාට ඇති විය හැකි විසඳුම්:

7. පිරිවිතර

• නිෂ්පාදන නම: Pyramid Plastics Rear Hugger
• ආදර්ශ අංකය: 07301B
• ගැළපුම: Kawasaki Ninja 250R (Years: 2008-2013)
• ද්රව්ය: උසස් තත්ත්වයේ ABS ප්ලාස්ටික්
• අවසන් කරන්න: ග්ලොස් කළු
• අයිතමයේ බර: Approximately 2.5 kg (as per product data)
• නිෂ්පාදකයා: පිරමිඩ ප්ලාස්ටික්

8. වගකීම් සහ සහාය

Pyramid Plastics products are manufactured to high standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Pyramid Plastics website. In case of any issues or for technical support, please contact your retailer or Pyramid Plastics customer service directly.

සබඳතා තොරතුරු:

• Webඅඩවිය: www.pyramidplastics.co.uk (උදාampසබැඳිය, සැබෑ සබැඳිය වෙනස් විය හැක)
• විද්‍යුත් තැපෑල: support@pyramidplastics.co.uk (exampඊමේල්)