HTVRONT HTV Heat Transfer Vinyl Bundle Instruction Manual

හැඳින්වීම

This manual provides detailed instructions for using your HTVRONT HTV Heat Transfer Vinyl Bundle. This high-quality PU vinyl is designed for easy cutting, weeding, and heat transfer, making it suitable for a variety of crafting projects. Please read through these instructions carefully before beginning your project to ensure optimal results and product longevity.

ආරක්ෂිත තොරතුරු

• Always exercise caution when using heat tools such as heat presses or irons.
• Keep heat transfer vinyl and accessories out of reach of children.
• Ensure proper ventilation when working with heat transfer materials.

පැකේජයේ අන්තර්ගතය

Your HTVRONT HTV Heat Transfer Vinyl Bundle includes:

• 47 sheets of 12" x 10" PU Heat Transfer Vinyl in 33 assorted matte colors.
• 1 Teflon Sheet.
• 1 Weeding Tweezer.
• උපදෙස් මාර්ගෝපදේශය.

Image: The HTVRONT HTV Heat Transfer Vinyl Bundle, showcasing the variety of colors and included weeding tool.

Image: A visual representation of the 12x10 inch dimensions of the vinyl sheets and a comprehensive color palette.

සැලසුම

Preparing Your Design

1. Create your design using your preferred cutting machine software (e.g., Cricut Design Space, Silhouette Studio).
2. Mirror your design horizontally before cutting. This is crucial for proper application.
3. Place the HTV sheet onto your cutting mat with the glossy side (carrier sheet) facing down. The matte, colored side should be facing up.

Cutting Settings

Recommended settings for common cutting machines:

Always perform a test cut to verify settings before cutting your final design.

මෙහෙයුම් උපදෙස්

1. Weeding

1. After cutting, carefully remove the excess vinyl from around your design using the included weeding tweezers or a weeding tool.
2. Ensure all small inner pieces of the design are also removed, leaving only the desired image on the clear carrier sheet.

Image: A visual guide demonstrating the weeding process and the subsequent heat transfer application.

2. Heat Transfer Application

Preheat your heat press or iron to the recommended temperature. The HTV is sensitive to temperature and pressure.

• නිර්දේශිත උෂ්ණත්වය: 284~293°F (140~145°C)
• නිර්දේශිත වේලාව: තත්පර 15-30

Using a Heat Press:

1. Pre-press your garment for 5-10 seconds to remove moisture and wrinkles.
2. ඔබේ වල් පැලෑටි ඉවත් කළ මෝස්තරය ඇඳුම මත විනිවිද පෙනෙන වාහක පත්‍රය ඉහළට මුහුණලා තබන්න.
3. Cover the design with the included Teflon sheet.
4. Apply heat and medium pressure for 15-30 seconds at 284~293°F.

Using a Home Iron:

1. Set your iron to the cotton/medium-high setting (no steam).
2. Pre-press your garment for 5-10 seconds.
3. ඔබේ වල් පැලෑටි ඉවත් කළ මෝස්තරය ඇඳුම මත විනිවිද පෙනෙන වාහක පත්‍රය ඉහළට මුහුණලා තබන්න.
4. Cover the design with the included Teflon sheet.
5. Apply firm, even pressure to each section of the design for 10-15 seconds. Ensure all areas receive adequate heat.

3. Cold Peel

HTVRONT HTV is a cold peel vinyl. This means you must wait for the design to cool completely before removing the clear carrier sheet.

1. Allow the garment and design to cool for 15-30 seconds after heat application.
2. Gently peel back the clear carrier sheet at a 30-45 degree angle. If the vinyl lifts, re-press the area with the carrier sheet and allow it to cool again before attempting to peel.

Image: A step-by-step visual guide illustrating the ease of use, including heat transfer, weeding, and the cold peel process for HTV.

රැකවරණය සහ නඩත්තුව

To ensure the longevity of your HTV designs, follow these care instructions:

• Wait 24 hours after application before washing the garment.
• Machine wash garment inside out in cold water with mild detergent.
• බ්ලීච් යොදන්නට එපා.
• අඩු ගින්දරේ වියළන්න හෝ එල්ලා වියළන්න.
• වේලා සේදීම නොකරන්න.
• If ironing is necessary, iron the garment inside out.

Image: Demonstrates the stretchability and durability of the HTV design on a t-shirt, and shows the garment being washed.

දෝෂගවේෂණය

• Vinyl not sticking: Ensure correct temperature and pressure are applied. Pre-press garment to remove moisture. Make sure you are performing a cold peel.
• Vinyl peeling after washing: Ensure proper care instructions are followed. Re-press the design if necessary.
• Difficulty weeding: Adjust cutting machine settings (blade depth, force, speed) to ensure a clean cut without cutting through the carrier sheet.

පිරිවිතර

• වෙළඳ නාමය: HTVRONT
• ද්රව්ය: Polyurethane (PU), Vinyl
• පත්‍ර ප්‍රමාණය: 12"ලීටර් x 10"වොට්
• ප්රමාණය: 47 sheets (33 assorted colors)
• යෙදුම: Heat transfer (Iron-on)
• Peel Type: සීතල පීල්
• ගැළපුම: Cricut, Silhouette Cameo, Heat Press Machines, Home Irons

වගකීම් සහ සහාය

HTVRONT stands by the quality and versatility of its HTV Heat Transfer Vinyl Bundle. For any concerns or support, please refer to the contact information provided in your product packaging or visit the official HTVRONT website. Your satisfaction is our priority.